i have a problem to start the flightplanner in fsx. first i start to make a plan in VROUTE and export to fsx.start fsx load the plan and that is ok.But as soon as i start up the next time in fsx and load in flightplan the routethan my fmc in 737 pic sais-there is no flightplan-.i have to start all over again.does anyone has an idea why this happens and is there a better way.i have fsx accelerator and fly with pic wilco 737 -300 doeke

wilco/feelThere 737 support forum -http://forum.iemit.comold forum with YEARS of information that can be searched -http://iemit.com/forum

737 pic sais-there [sic] is no flightplan-

the FMC only reads the flightplan in active FS memory. the FMC cannot read FS flightplan files directly. you must first load a FS saved flightplan info the FS's flightplanner. only after doing this can you load a 'FS flighplan' into the FMC.discussion of this topic can be found by searching the support forums listed above.--

wilco/feelThere 737 support forum -http://forum.iemit.comold forum with YEARS of information that can be searched -http://iemit.com/forumthe FMC only reads the flightplan in active FS memory. the FMC cannot read FS flightplan files directly. you must first load a FS saved flightplan info the FS's flightplanner. only after doing this can you load a 'FS flighplan' into the FMC.discussion of this topic can be found by searching the support forums listed above.--

thats what i do.1-vroute export to fsx, asked for save which i do2-startup fsx3-flightplan /load and the plan from vroute is there4-i have to open the navigation first and then reload again.5-save6-to the gate7 after overheadpanel /lignup8open fmc got text cannot open the flightplani dont understand what i do wrong

thats what i do.1-vroute export to fsx, asked for save which i do2-startup fsx3-flightplan /load and the plan from vroute is there4-i have to open the navigation first and then reload again.5-save6-to the gate7 after overheadpanel /lignup8open fmc got text cannot open the flightplani dont understand what i do wrong

b.t.w I went through all the items at the forum but there is no one that suits my problem.

thats what i do.1-vroute export to fsx, asked for save which i do2-startup fsx3-flightplan /load and the plan from vroute is there4-i have to open the navigation first and then reload again.5-save6-to the gate7 after overheadpanel /lignup8open fmc got text cannot open the flightplani dont understand what i do wrong

I would do:Open the kneeboard nav pageEnter manually the plan in the FMCNo nagRV

4-i have to open the navigation first and then reload again.5-save

why are you saving? if the flightplan is really in FSX format the game will ask you if you wish to reposition to the starting point.

6-to the gate

don't do the 'load' from the freeflight/create flight menu. be in-game and load the plan into the GPS. say NO when FS asks you to reposition.be sure your flightplan does not have SID/STAR/or runway codes. the FMC will only read waypoints. once the route is loaded you must input the departure rwy, SID, STAR and arrival rwy.support forum -http://forum.iemit.com----

why are you saving? if the flightplan is really in FSX format the game will ask you if you wish to reposition to the starting point.don't do the 'load' from the freeflight/create flight menu. be in-game and load the plan into the GPS. say NO when FS asks you to reposition.be sure your flightplan does not have SID/STAR/or runway codes. the FMC will only read waypoints. once the route is loaded you must input the departure rwy, SID, STAR and arrival rwy.support forum -http://forum.iemit.com----

The Wilco/Feelthere 737 is a complex 737 sim with an FMC, there is no GPS. You normally load the flightplan into it either manually or using the request flightplan button on the Routes page.

complex 737 sim with an FMC, there is no GPS.

correct.

You normally load the flightplan into it either manually or using the request flightplan button on the Routes page.

again correct.but ... doeke is attempting to use the 737's 'load FS flightplan' option. i believe doeke is attempting to load saved FS plans that are not in active FS memory (aka, FS flightplanner or the FS GPS). the wilco/feelThere 737 cannot load a FS flightplan directly.i only use the FS flightplan option during testing ... never for 'personal flights'. for my 'own flights' i enter the plan into the FMC as it takes no time at all using a few waypoints and jetways. it is important to remember that even if you load a 'saved' plan you still need to enter the performance information, departure rwy, SID and transitions.--

correct.again correct.but ... doeke is attempting to use the 737's 'load FS flightplan' option. i believe doeke is attempting to load saved FS plans that are not in active FS memory (aka, FS flightplanner or the FS GPS). the wilco/feelThere 737 cannot load a FS flightplan directly.i only use the FS flightplan option during testing ... never for 'personal flights'. for my 'own flights' i enter the plan into the FMC as it takes no time at all using a few waypoints and jetways. it is important to remember that even if you load a 'saved' plan you still need to enter the performance information, departure rwy, SID and transitions.--

ok, i understand now there is no way to download the route from VROUTE to 737 pic.from vroute is went to some maps like c:/prg.files 86/games/ms/feelthere/custum DBfrom there i can do nothing to fsx.next i can download the same route from vroute to fsx and it is in the map c:/user/documents/flightplan.from there I can after startup fsx/ load the plan and go on to the theplace to start.but with request at the fmc, i got the message not availeble or plan is missing.is this the right way normally, with default aircrafts, and is only the 737 pic not doing the job?doeke

ok, i understand now there is no way to download the route from VROUTE to 737 pic.

110% correct.how to correctly load -1 - create flight for departure airport. set a default FS aircraft, say the cessna.2 - load flight3 - turn off cessna's engine. make sure batts and avionics masters are ON.4 - wait about 15ish seconds and use FS's pull-down menu to select the 737classic you wish to fly. (DO NOT create a new flight, just change the plane using the pull-down menu).5 - when back in the game open FS's flightplanner and load the 'flightplan'6 - when FS says 'reposition' say NO7 - once back in the game request flighplan with the FMC.again, the above has been stated MANY times in the 737classic's support forums -http://iemit.com/forum(open for searching, not open to new posts)http://forum.iemit.com(registration required, open to searching and new posts)----

110% correct.how to correctly load -1 - create flight for departure airport. set a default FS aircraft, say the cessna.2 - load flight3 - turn off cessna's engine. make sure batts and avionics masters are ON.4 - wait about 15ish seconds and use FS's pull-down menu to select the 737classic you wish to fly. (DO NOT create a new flight, just change the plane using the pull-down menu).5 - when back in the game open FS's flightplanner and load the 'flightplan'6 - when FS says 'reposition' say NO7 - once back in the game request flighplan with the FMC.again, the above has been stated MANY times in the 737classic's support forums -http://iemit.com/forum(open for searching, not open to new posts)http://forum.iemit.com(registration required, open to searching and new posts)----

ok thanks but a last question?i did understand for this way of default aircrafts however when i download a route(i.e VROUTE) then some nasty things appear inabove flightplan.for instance in fsx, before you go out the flightplan, i have to push the button- navigation.it create an own flightplan. thats not the plan with the right route from VROUTE.so next i have to load again and then the right comes up, but then the gate has been changed again.can i change that one later without losing the right route again?i cannot check these because the 737 pic doesnot accept the plan and the default has no fmc.so its more that i would like to know it in case i will have another aircraft in the future which has fmc and the plan will go the fmc.thanks in advanced.doeke