Hello,After finishing a few flights by using FS2Crew I've got a problem with the landing procedure. Up to reaching the checklist "LDG - FLAPS" everything works fine. I can switch the flaps positions by using the green button too. But after setting up the flaps to "full" the checklist doesn't proceed with the next option. So I can't run the landing checklist. If I press the green button again after the "full flaps" configuration the flaps callout begins with position "1" again. By the way the landing gear is down.I can't use the green button for calling "Landing" too. If I switch manually from the "LDG - FLAPS" checklist to the next one by using the right arrow, the flaps of the plane will be set back to the "3" position. From the point of reaching the "full flaps" configuration there is something wrong with the workflow of FS2Crew.Perhaps you can hepl me with this problem.Thanks,Patric

Hello,After finishing a few flights by using FS2Crew I've got a problem with the landing procedure. Up to reaching the checklist "LDG - FLAPS" everything works fine. I can switch the flaps positions by using the green button too. But after setting up the flaps to "full" the checklist doesn't proceed with the next option. So I can't run the landing checklist. If I press the green button again after the "full flaps" configuration the flaps callout begins with position "1" again. By the way the landing gear is down.I can't use the green button for calling "Landing" too. If I switch manually from the "LDG - FLAPS" checklist to the next one by using the right arrow, the flaps of the plane will be set back to the "3" position. From the point of reaching the "full flaps" configuration there is something wrong with the workflow of FS2Crew.Perhaps you can hepl me with this problem.Thanks,Patric

Hi Patric,Hard to guess.Did you install the latest update?Link:http://www.fs2crew.com/cart/pages/FS2Crew%3A-Wilco-feelthere-Airbus-Special-Edition-Service-Updates-and-Extras.htmlBest,

Did you install the latest update?

Yes, I've installed the latest update.Patric

Yes, I've installed the latest update.Patric

Hi Patric,I'm not sure why that's happening in your case. Haven't had that one reported before.Please try it again with a different Airbus model.Are you running any hardware that could be running interference?Cheers,

Hi Patric,I'm not sure why that's happening in your case. Haven't had that one reported before.Please try it again with a different Airbus model.Are you running any hardware that could be running interference?Cheers,

Hello Bryan,Thanks again for your quick answer. I've allready used FS2Crew at all models (A319, A320, A321). Same problem with every model.I don't know which of my hardware could interfere with FS2Crew. It is not so bad if I can't get the landing checklist. But the big problem for me is the change of the flap setting from "Full" to "3" when I manually want to switch to the next checklist.Patric

Hello Bryan,Thanks again for your quick answer. I've allready used FS2Crew at all models (A319, A320, A321). Same problem with every model.I don't know which of my hardware could interfere with FS2Crew. It is not so bad if I can't get the landing checklist. But the big problem for me is the change of the flap setting from "Full" to "3" when I manually want to switch to the next checklist.Patric

Hi Patric,By hardware, are you using any external hardware that might override the flap setting like a Go Flight module?We have a lot of people using this software successfully, so it's hard to guess.Did you make any custom mods to the Airbus?Does your Wilco Airbus have all the latest Wilco Airbus updates?

Hi Patric,By hardware, are you using any external hardware that might override the flap setting like a Go Flight module?We have a lot of people using this software successfully, so it's hard to guess.Did you make any custom mods to the Airbus?Does your Wilco Airbus have all the latest Wilco Airbus updates?

Hallo Bryan,I don't have any external hardware for my FSX. I only use a joystick "Micrsoft Sidewinder Precision 2". Custom mods:panel.cfg:Aerosoft FS Flight Keeper ACARS-Deviceaircraft.cfg:[FSFK_General]flaps-display.0=0flaps-display.1=1flaps-display.2=1+F flaps-display.3=2 flaps-display.4=3flaps-display.5=FullThese values are necessary for FS Flight Keeper for the right detection of the Airbus flap setting.I'm using the latest FSX Wilco-version "3e".Patric

Hallo Bryan,I don't have any external hardware for my FSX. I only use a joystick "Micrsoft Sidewinder Precision 2". Custom mods:panel.cfg:Aerosoft FS Flight Keeper ACARS-Deviceaircraft.cfg:[FSFK_General]flaps-display.0=0flaps-display.1=1flaps-display.2=1+F flaps-display.3=2 flaps-display.4=3flaps-display.5=FullThese values are necessary for FS Flight Keeper for the right detection of the Airbus flap setting.I'm using the latest FSX Wilco-version "3e".Patric

Hi Patric,I suspect the custom mod to the Aircraft.Cfg is the source of the issue.Please try the original Aircraft.Cfg.Best,

Hi Patric,I suspect the custom mod to the Aircraft.Cfg is the source of the issue.Please try the original Aircraft.Cfg.Best,

Hello Bryan,OK, I'll try it at my next flight.Patric

Hello Bryan,I've just finished a flight by using the Wilco A319 IAE model without "FS Flight Keeper" entries. But the problem hasn't gone.After flaps has been switched to "Full" position the "LDG-FLAPS" checklist didn't continue. Directly after the touchdown the checklist has changed to "ROLLOUT". Patric

Hello Bryan,I've just finished a flight by using the Wilco A319 IAE model without "FS Flight Keeper" entries. But the problem hasn't gone.After flaps has been switched to "Full" position the "LDG-FLAPS" checklist didn't continue. Directly after the touchdown the checklist has changed to "ROLLOUT". Patric

Hi Patric,Did you do a clean re-install of the Airbus so your aircraft.cfg would be restored to its pure original condition?Other than that, what did you select on the FS2Crew Approach Briefing Panel in the CONFIG field (page 33) in the manual.Best,

Hi Patric,Did you do a clean re-install of the Airbus so your aircraft.cfg would be restored to its pure original condition?Other than that, what did you select on the FS2Crew Approach Briefing Panel in the CONFIG field (page 33) in the manual.Best,

Hello Bryan,I did a clean reinstall of the Wilco Airbus. I've selected "FULL" in the CONFIG field of the Approach Briefing.Patric

Hello Bryan,I did a clean reinstall of the Wilco Airbus. I've selected "FULL" in the CONFIG field of the Approach Briefing.Patric

Hi Patric,Still not sure. Please email me via the Contact Page on the FS2Crew website and we can do some additional tests. Could you make a video so I can see what you're doing?Thanks,

Patric,Here's a video showing it in action... perhaps this will help if you can see it first hand...P.S. Disregard the "Loc" warning... user didn't appear to have the ILS setup properly.http://www.youtube.com/watch?v=mUz7sJgonRg