Archived

This topic is now archived and is closed to further replies.

RoyH

Changing Radio Frequencies

Recommended Posts

I have new PC with Windows 7 and have installed FSX; REX; ORBX; 737NGX.  All works well with good fps.

 

Last week I flew on VATSIM from EGKK to EGCC and return. Multiple air traffic controllers were online and all functioned correctly. Upon landing back at EGKK I switched from EGKK APP to EGKK GND as requested, but could not get voice contact with the ground controller. The radio was set to the correct frequency for ground control - but the voice channel stayed with EGKK APP.  I operated the transfer button to switch the selected and standby frequencies several times   - but the frequency did not switch.

 

At the start of the flight I had selected EGKK GND and it had worked, Throughout the flight I changed the COMM frequency about 7 times. All worked okay. It was only returning to EGKK and selecting EGKK GND again that I had the problem.

 

Any ideas much appreciated.  

 

RoyH 

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Could be an issue on the controller's end, or the server. I'd try switching to a freq with no voice (122.8 for example) then to the GND freq. 

Share this post


Link to post
Share on other sites

VATSIM sometimes has weird issues with voice. It sometimes helps to switch out and back to the frequency. I also had to disconnect from the network and connect again to get it to work (very few times).

Share this post


Link to post
Share on other sites