December 28, 20178 yr Hi all, I recently bought the RXP GNS 530W v2. I am interested in using it only when it can be integrated in the VC as a 3D gauge and so I have been a bit disappointing that not many developers have an option. Actually, I have only fitted it so far to my Learjet 25D. My fleet includes A2A, RealAir, Justflight and Milviz GA aircraft (also on my signature). The reason I am writing this is because I was considering also purchasing the GNS 430W thinking to use the crossfill option that is possible. However, I would like to first be sure that I would be able to install the combination of the two as 3D gauges at least at some of my planes. Is this possible to any of them or if I buy the 430W I will only be able to use it as a 2D pop up? Simulators: Prepar3D v5.4 | X-Plane 12 | DCS World | MSFS 2024 | PC Hardware: Dell U3417W | AMD Ryzen 7 9800 X3D | ASUS TUF 5070 Ti | ASUS TUF B580 Plus Wifi | G.Skill Z5 Neo 64GB 3000Mhz CL30 | Samsung 990 Pro 2TB + 970 EVO Plus 1TB + 860 EVO 2TB + 850 EVO 1TB, Western Digital Black Caviar Black 6TB | Corsair RM1000i | Corsair 280 Titan RX | VRM Fan | Fractal Design Define S2 Gunmetal | Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | VIER IM POTT Sidestick CPT Side | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | Monsterteck Desk Mounts | WINWING EfisL+FCU+MCDU | My fleet catalog: Link
December 28, 20178 yr Hi... RXP has no control over the 3D models aircraft developers create - so unless the developer includes 3D models for two GNS's in a cockpit - you're limited to a popup... While you don't seem to have any - Carenado/Alabeo - included support for RXP GNS v1 in many of their aircraft - so these can be swapped out in seconds using the RXP configuration tool... Regards, Scott
December 28, 20178 yr Author Hi Scott, Thanks for the reply. Okay, so it seems I would rather wait for my at least A2A to develop a GNS integration in 2018 before I proceed with the GNS 430W. Simulators: Prepar3D v5.4 | X-Plane 12 | DCS World | MSFS 2024 | PC Hardware: Dell U3417W | AMD Ryzen 7 9800 X3D | ASUS TUF 5070 Ti | ASUS TUF B580 Plus Wifi | G.Skill Z5 Neo 64GB 3000Mhz CL30 | Samsung 990 Pro 2TB + 970 EVO Plus 1TB + 860 EVO 2TB + 850 EVO 1TB, Western Digital Black Caviar Black 6TB | Corsair RM1000i | Corsair 280 Titan RX | VRM Fan | Fractal Design Define S2 Gunmetal | Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | VIER IM POTT Sidestick CPT Side | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | Monsterteck Desk Mounts | WINWING EfisL+FCU+MCDU | My fleet catalog: Link
December 28, 20178 yr Hi... Happy to help... Or hedge you bet with the rest of us and post on the A2A RXP Integration thread - on the A2A forum - to express your desire as their customer... I got spoiled with the MilViz C310 - has a dual GTN650 option - with the smaller display I can see how you would want two... Regards, Scott
December 28, 20178 yr Author 3 hours ago, scottb613 said: Hi... Happy to help... Or hedge you bet with the rest of us and post on the A2A RXP Integration thread - on the A2A forum - to express your desire as their customer... I got spoiled with the MilViz C310 - has a dual GTN650 option - with the smaller display I can see how you would want two... Regards, Scott Yes..: ) I did that already on the A2A forums. Actually it was after my post that Lewis confirmed that they will work on integration in 2018 : ) I don't have the MilViz C310, but do you know if it can work with the GNS 530W v2 or GNS 430W v2? Simulators: Prepar3D v5.4 | X-Plane 12 | DCS World | MSFS 2024 | PC Hardware: Dell U3417W | AMD Ryzen 7 9800 X3D | ASUS TUF 5070 Ti | ASUS TUF B580 Plus Wifi | G.Skill Z5 Neo 64GB 3000Mhz CL30 | Samsung 990 Pro 2TB + 970 EVO Plus 1TB + 860 EVO 2TB + 850 EVO 1TB, Western Digital Black Caviar Black 6TB | Corsair RM1000i | Corsair 280 Titan RX | VRM Fan | Fractal Design Define S2 Gunmetal | Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | VIER IM POTT Sidestick CPT Side | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | Monsterteck Desk Mounts | WINWING EfisL+FCU+MCDU | My fleet catalog: Link
December 29, 20178 yr 15 hours ago, Daedalus said: Yes..: ) I did that already on the A2A forums. Actually it was after my post that Lewis confirmed that they will work on integration in 2018 : ) I don't have the MilViz C310, but do you know if it can work with the GNS 530W v2 or GNS 430W v2? Hi... Let me look this weekend and see if I can get the MilViz model configured with the GNS - I seem to recall they opted to do a no knob (2D) implementation on the C310 for the GNS - - - while using 3D knobs on the GTN... Honestly - I've been flying the Alabeo C310 lately - after swapping out the lousy sounds they included the aircraft is pretty nice - I believe they have 3D knobs for both the GTN and GNS - but only a single unit install... I'll follow up after I get a chance to look... Regards, Scott
January 9, 20188 yr If an addon has the old RXP units for FSX you can somewhat easily install these v2 into the VC. Some manual configs are necessary Check the panel configuration threads first though! | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
Archived
This topic is now archived and is closed to further replies.