February 24, 20188 yr Ran P3d 4.2 about 1 1/2 hours ago no startup issues what so ever. Start P3d after getting back from the shops and i get this. is, Windows 10 64bit 8700k 32gb DDR4 MSI 1080 Drivers 390.77 Regards Mike Mike Intel 12700k No over clocking 32GB G-Skill 3600 Ram MSI RTX3080
February 24, 20188 yr Looks like the BIOS is not set to exclusively or at least primarily use your discrete graphics card (the GTX1080) versus the intel 630 built into the 8700K. I'd start by checking the BIOS. If that's not it, check in device manager that the 1080 is visible...if not, it may need to be reseated. Also make sure they have the two external power pigtails connected from the PSU to the GPU. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
February 24, 20188 yr If the above advice does not help : Delete your p3d.cfg file and let P3D built a new one. If that does not help : Un-reinstall your graphics card drivers Edited February 24, 20188 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 24, 20188 yr Author 7 minutes ago, w6kd said: Looks like the BIOS is not set to exclusively or at least primarily use your discrete graphics card (the GTX1080) versus the intel 630 built into the 8700K. I'd start by checking the BIOS. If that's not it, check in device manager that the 1080 is visible...if not, it may need to be reseated. Also make sure they have the two external power pigtails connected from the PSU to the GPU. Regards I know what you are saying. But the PC has not been turned off or restarted. As i said i had it running no problems at all 2 hours prior. It has just thrown this error in my face for no reason (Some reason). 7 minutes ago, GSalden said: If the above advice does not help : Delete your p3d.cfg file and let P3D built a new one. If that does not help : Un-reinstall your graphics card drivers Tried that moved the cfg to my desktop and restarted and same message :( Mike Intel 12700k No over clocking 32GB G-Skill 3600 Ram MSI RTX3080
February 24, 20188 yr Author Ok fixed the problem. I had to do this with Ghost Recon wildlands as i couldn't change the resolution in game. And another game gave me the same error, cannot remember which. So i went into Nvidia control panel and set my desktop to 1280x720 Started P3d let it load then went back to Nvidia Control panel and set my desktop back to 3440x1440. After that P3d loaded just fine. I tell you..... Some days..... Regards Mike Mike Intel 12700k No over clocking 32GB G-Skill 3600 Ram MSI RTX3080
February 24, 20188 yr Glad to read that you were able to solve this 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
Archived
This topic is now archived and is closed to further replies.