Hi, does anybody managed to configurate gsx or gsx v2 to the S360, (including a freighter config?) I have no vehicles showing etc around the plane except for the pushback truck. Thank you. 

You're not alone.

Cheers, Ed

This is incomplete, but this is how far I've been able to get with the pax version. The baggage loader will pull up as well as the passenger bus, but I see no passengers. GSX claims there are no stairs, even though there are. I think that maybe GSX doesn't recognize the small stairs on the S360. GSX works fine on my two ATRs with their stairs.

If anyone has any suggestions, let us all know.

Lee

 

[aircraft]
nosegear = 6.71
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  2
wingrootpos = 1.13 -1.22 0.30
wingtippos = 11.28 -0.30 0.30
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -2.59 1.22 -0.30
engine2pos = 2.59 1.22 -0.30
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
remove = 1

[exit2]
remove = 1

[exit3]
pos = -1.00 -4.25 -2.51 0.00
code = 0
embeddedStair = -1.75 -4.25 -2.51 -2.09 -4.25 -2.85

[exit4]
remove = 1

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
remove = 1

[cargo2]
remove = 1

[cargomain]
pos = -0.75 7.75 -2.51 0.00
code = 0
embeddedStair = 0
uldcode = BELT
 

Update, finally got GSX working, here is the corrected GSX info. It's only 5 passengers for the moment, but maybe someone knows how to add more.

Any improvements, please let us all know!

Here is the corrected GSX config:

[aircraft]
nosegear = 6.71
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  3
wingrootpos = 1.13 -1.22 0.30
wingtippos = 11.28 -0.30 0.30
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -2.59 1.22 -0.30
engine2pos = 2.59 1.22 -0.30
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
remove = 1

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.00 -4.25 -2.51 0.00
code = 0
embeddedStair = -1.50 -4.25 -2.51 -1.84 -4.25 -2.85

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
remove = 1

[cargo2]
remove = 1

[cargomain]
pos = -0.75 7.75 -2.51 0.00
code = 0
embeddedStair = 0
uldcode = BELT

 

I edited the aircraft cfg with the following, it will only give you 5 passengers at the moment:

max_number_of_stations = 22

station_load.0 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.2 =190,  3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.3 =190,  0, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.4 =190, -3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)

station_name.0 = "captain"      
station_name.1 = "copilot"  
//station_name.0 = "pilot"      
//station_name.1 = "co pilot"   
station_name.2 = "pax 6680lbs" 
station_name.3= "fwd bag  1500lbs" 
station_name.4= "aft bag  1900lbs"

Okay, this tweaks it even a shade more:

 

[aircraft]
nosegear = 6.71
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  3
wingrootpos = 1.13 -1.22 0.30
wingtippos = 11.28 -0.30 0.30
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -2.59 1.22 -0.30
engine2pos = 2.59 1.22 -0.30
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
remove = 1

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.00 -4.25 -2.51 0.00
code = 0
embeddedStair = -1.01 -4.25 -2.51 -1.82 -4.25 -3.21

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
remove = 1

[cargo2]
remove = 1

[cargomain]
pos = -0.75 7.75 -2.51 0.00
code = 0
embeddedStair = 0
uldcode = BELT

 

Also, adding a few more passengers. Make a back up of your aircraft.cfg and replace this section in your aircraft.cfg:

 

[WEIGHT_AND_BALANCE]
max_gross_weight = 26553                    
empty_weight =     16900                 // (pounds)

reference_datum_position =  0, 0, 0     // (feet) distance from FlightSim Reference position: (1/4 chord, centerline, waterline)
empty_weight_CG_position =  2, 0, -5      // 1(feet) longitudinal, lateral, vertical distance from specified datum

max_number_of_stations = 22

station_load.0 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.2 =190,  3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.3 =190,  0, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.4 =190, -3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.5 =190, -6, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.6 =190, -9, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.7 =190, -12, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.8 =190, -15, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)

station_name.0 = "captain"      
station_name.1 = "copilot"  
//station_name.0 = "pilot"      
//station_name.1 = "co pilot"   
station_name.2 = "pax 6880lbs" 
station_name.3= "fwd bag  1800lbs" 
station_name.4= "aft bag  2150lbs"