May 16, 20197 yr I have a Nvidia RTX2080 TI and a 4k Moniter. I set the resolution to 3840 x 2160 x 32, on the Ti 0.1 display for my 4k moniter. its reverts to the Ti0.0 diplay and the 1920 x 1080 resolution, everytime. Can someone please help me out as to what I might be doing wrong here. Thanks Scott Scott Redden 121 Ramp Ops, Aircraft Dispatcher, ASEL: C150, C172, PA28-160 System: Intel I7-8700k @ 3.7Ghz, 16.0 GB, Nvidia Geforce RTX 2080 Ti
May 17, 20197 yr Are you running only that single monitor? The Ti.0.1 designator is for a second display on that card. Assuming you are running just the single monitor, check that your Prepar3D.cfg file has one, and only one [Display.Device.xxxxxx] section. It should look like this: [Display.Device.NVIDIA GeForce RTX 2080 Ti.0.0] Mode=3840x2160x32 Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 17, 20197 yr Author I use two monitors, I want to use my 4K strictly for P3d. This is the cfg file [DISPLAY.Device.NVIDIA GeForce RTX 2080 Ti.0.1] Mode=3840x2160x32 [DISPLAY.Device.NVIDIA GeForce RTX 2080 Ti.0.0] Mode=1920x1080x32 so why on the graphics setup page, is p3d using th Ti.0.0 with 1080 resolution, when its on the 4K monitor? does the P3D icon need to be on the 4K monitor for it to load the 4K settings? Scott Redden 121 Ramp Ops, Aircraft Dispatcher, ASEL: C150, C172, PA28-160 System: Intel I7-8700k @ 3.7Ghz, 16.0 GB, Nvidia Geforce RTX 2080 Ti
May 17, 20197 yr Author The other thing i noticed is that when the main page loads it loads on the the 1080 monitor. How do i get it to come up on the 4K monitor without having to move it every time? Scott Redden 121 Ramp Ops, Aircraft Dispatcher, ASEL: C150, C172, PA28-160 System: Intel I7-8700k @ 3.7Ghz, 16.0 GB, Nvidia Geforce RTX 2080 Ti
May 17, 20197 yr Which is the Windows primary (#1) monitor? I have the same setup but the 4k monitor is #1 and the 1080p is #2. None of your issues. P3D loads from and displays on the 4k with the 1080p used for active sky, FEB or other utils. -J 13700KF | RTX 4090 @ 1440 | 64GB DDR5 | 2 x 1TB SSDs | 1TB M.2 NVMe
May 17, 20197 yr Moderator 6 hours ago, DFWFlightOps said: I use two monitors, I want to use my 4K strictly for P3d. This is the cfg file [DISPLAY.Device.NVIDIA GeForce RTX 2080 Ti.0.1] Mode=3840x2160x32 [DISPLAY.Device.NVIDIA GeForce RTX 2080 Ti.0.0] Mode=1920x1080x32 so why on the graphics setup page, is p3d using th Ti.0.0 with 1080 resolution, when its on the 4K monitor? does the P3D icon need to be on the 4K monitor for it to load the 4K settings? P3D is using the 0.0 display as that is the first one. Edit P3D.cfg and swap 0 and 1 for each and that should fix it. [DISPLAY.Device.NVIDIA GeForce RTX 2080 Ti.0.0] Mode=3840x2160x32 [DISPLAY.Device.NVIDIA GeForce RTX 2080 Ti.0.1] Mode=1920x1080x32 Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
Archived
This topic is now archived and is closed to further replies.