October 5, 20205 yr My PC is working great but one major problem. I connect my Steelseries Keyboard/ head set and mouse. All fine , but when I try and add more USB, as I need to add TW Wathhog stick and throttle and TPR and trackIR. It all goes wrong. I can just get away with adding one. But if I add anymore MSFS when I try to start a flight from the runway will load to the hold short but the second I press "fly" CTD normally followed by a "Not Enough USB Controller Resources" The minute I go back to no or just one( joystic) all is fine. I just don't know what to do. I've gone into power management and set that to performance also never turn down USB's and NCP is also set to performance. But after reading up it seems not to be about power, its about "lines". So I will ring PC builders for help but if anyone can help that would be great. Edited October 5, 20205 yr by Nyxx David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 5, 20205 yr tried using a usb hub may not work, take it you have google it since it brings a few solutions Edited October 5, 20205 yr by pete_auau I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
October 5, 20205 yr Author 43 minutes ago, pete_auau said: tried using a usb hub may not work, take it you have google it since it brings a few solutions Been on the phone and they tried turning something of in the BIOS, begins with a X I think, it did not help. They will return the PC change MOBO and set all USB's. But first they are sending me a powered USB hub to try. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 5, 20205 yr 10 minutes ago, Nyxx said: But first they are sending me a powered USB hub to try. sure this will work since i got all my controllers etc set to a usb hub although its not a powered one Edited October 5, 20205 yr by pete_auau I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
October 5, 20205 yr 10 minutes ago, Nyxx said: But first they are sending me a powered USB hub to try. The error message *shouldn't* be related to power. However, I got it some months ago on a heavily connected PC and solved it using powered hubs. The peripherals in this case were expensive laboratory instruments with their own power supplies, yet it worked. Go figure.
October 5, 20205 yr Author 30 minutes ago, lzamm said: The error message *shouldn't* be related to power. However, I got it some months ago on a heavily connected PC and solved it using powered hubs. The peripherals in this case were expensive laboratory instruments with their own power supplies, yet it worked. Go figure. I have my figures crossed the Hub will sort it. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 5, 20205 yr 2 minutes ago, Nyxx said: I have my figures crossed the Hub will sort it. no need to bet my bottom dollar it will work 🙂 I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
October 5, 20205 yr Author 39 minutes ago, pete_auau said: sure this will work since i got all my controllers etc set to a usb hub although its not a powered one Where to you plug in it Pete. Into a USB2 or a USB3.2? Yes I really hope I can plug my TM Warthog set in, x2 USB's, TPR x1 USB and TrackIR in the 4th. As I set here now I have my Steelseries USB mouse and Headset plugged into 2x USB2 and the Keyboard seems to want a USB3.2, all is well. Edited October 5, 20205 yr by Nyxx David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 5, 20205 yr think i got it plugged in my normal standard one being usb 2 and the rest of my stuff being the external drive and tr and head set to the other usb hubs so got all my usb are being used I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
Archived
This topic is now archived and is closed to further replies.