January 13, 20215 yr I used to have it where the joystick 2 button on my T1600 would default back to the Captain view on my A320. I wanted to switch it around and get a little different view / perspective and save it again. However, in the meantime, I lost it and now button 2 doesn't reset my captain view. Is there a way to set all of my views on my T1600 or at least get it back so i can bind button 2 back to reset my position? Right now I use the hat switch to pan around but nothing else is mapped Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
January 14, 20215 yr Author Do I need something like Chaseplane for this or is this something that can be done with the default? Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
January 15, 20215 yr Hello Did you check this out ? https://flightsimulator.zendesk.com/hc/en-us/articles/360016003159-Camera-Overview And this as well Regards AHS712D Alvaro Escorcia KSGR AHS712D Alvaro Escorcia KSGR/OMAAAirHispania Virtual AirlineMSFS / ASUS TUF Gaming F15-Refresh-144Hz / 11GenIntel (R)Core (TM) i7-11800H NVIDIA-GeForce-RTX3060GPU / 1TB-Samsung SSD / 32GB-RAM SAMSUNG-SmartMonitor-M7-32"4K
January 15, 20215 yr or this... -J 13700KF | RTX 4090 @ 1440 | 64GB DDR5 | 2 x 1TB SSDs | 1TB M.2 NVMe
January 15, 20215 yr Author Thanks! Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
January 15, 20215 yr Author The one thing I can't figure out is creating a custom view, and mapping that to my joystick 2 button. I went and created a view I liked for captain, saved it and then assigned "load view 1" to my joystick 2 button. It works, but it toggles 2 views. It goes back to the previous view before going back to my view i created. I checked and I didn't have anything else mapped to my joystick 2 button. Is there a setting I need to toggle so I can only have that button go to the view I want and not the previous? Outside of that, these are very helpful. Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
Archived
This topic is now archived and is closed to further replies.