GTN 750 and GTN 650 Black screen showing "Rebooting" message

[eloyrfs 0]

Hello, I recently had to reinstalled windows and all programs (including X-Plane11). I own the Carenado Bonanza F33A and the vFlyteAir Piper PA-28-140 Cherokee “Modern” airplanes, both support Reality XP GTNs 750/650 respectively. Before I had to reinstall windows and all programs in my PC everything was working great. But now I have an issue when trying to open the RealityXP GTN in these airplanes, the screen is all black with small letters at the bottom showing "Rebooting", no matter what I do after that X-Plane crashes. I tried to follow few items in the troubleshooting section of the GTN manual, here are the logs:

From C:users/username/Documents:

rxpGtnSim.dll.log

21/06/23 11:21:05.268 08340 -    ] # rxpGtnSim64.dll version 2.5.28.0
21/06/23 11:21:05.268 08340 INFO ] 
21/06/23 11:21:22.138 08340 INFO ] GTN 750.1 - TRAINER 6624
21/06/23 11:21:22.139 08340 INFO ] C:\Program Files (x86)\Garmin\Trainers\Packages\GTN\Bin
21/06/23 11:21:22.141 08340 INFO ] C:\Program Files (x86)\Garmin\Trainers\Packages\GTN\data
21/06/23 11:21:22.142 08340 INFO ] C:\ProgramData\Garmin\Trainers\Databases
21/06/23 11:21:22.144 08340 INFO ] C:\ProgramData\Garmin\Trainers\GTN\nonvol
21/06/23 11:23:16.498 08340 INFO ] using: %LOCAL_APPDATA%\CrashRpt\UnsentCrashReports\GTN Trainer_6.62.4.0RXP

rxpGTN.xpl.log

21/06/23 11:21:03.102 08340 -    ] # win.xpl version 2.5.28.2
21/06/23 11:21:03.102 08340 INFO ] 
 

From: E:\SteamLibrary\steamapps\common\X-Plane 11\Aircraft

Carenado F33A Bonanza REP

RealityXP.GTN.ini

Spoiler

 

[GTN]
; comma separated list of gauges
gauges = GTN_750_1

[GTN_750_1]
LogTrainer = 7
DebugValue = 1
; comma separated list of read only settings.
locked = CopilotSide, RadiosPair, AutoNavSource, UseAudioPanel, FuelType
; comma separated list of render targets.
drawto = WINDOW, PANEL3D
; is the master device if true.
MasterDevice = true 
Rheostat.Display = 0
Rheostat.Buttons = 2
LinkCrs = true 
LinkObs = true 
LinkVor = true 
UseRyanTcad = false
VoicePref = MALE
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GTN_750_1.WINDOW]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 5437,1049,701,658
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 
; display as popout window if true (requires XP11.1).
undocked = true 
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790
; auto hide in external view if true.
autohide = false

[GTN_750_1.PANEL3D]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1231,2010,804,948
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = true 
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 

 

vFlyteAir_Cherokee140Modern

RealityXP.GTN.ini

Spoiler

 

[GTN]
; comma separated list of gauges
gauges = GTN_650_1

[GTN_750_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = false
; connects GPS to copilot side if true.
CopilotSide = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to Audio Panel if true.
UseAudioPanel = true
; connects GPS to Transponder if true.
UseTransponder = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = false
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use transponder VFR code: USE_CODE,VFR_US,VFR_EUR
VFRmode = VFR_US
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = AVGAS
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), or -1 (auto detect Vref: 84)
TawsApprSpeed = 96
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 110)
TawsFlapSpeed = 121
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 999)
TawsGearSpeed = 999
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; main: CDI Key
AFMS.cdi_key = 
; main: Selected Course for GPS
AFMS.sel_crs_gps = 
; main: Selected Course for VLOC
AFMS.sel_crs_vloc = 
; main: V-Flag State (1: declutter
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: Airspace Labels
AFMS.airspace_labels = 
; nav : Mark On Target
AFMS.mark_on_target = 
; nav : RF Procedure Legs
AFMS.rf_procedure_legs = 
; vnav: Vertical Navigation Type (0: VCALC, 1: VNAV)
AFMS.vnav_enabled = 
; vnav: Transition To Approach
AFMS.vnav_trans_to_appr = 
; vnav: VDI Scale (ft)
AFMS.vnav_vdi_scale_factor = 
; vnav: Transition Altitude (180 = FL180)
AFMS.vnav_trans_altitude = 

[GTN_750_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 984,941,830,790
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GTN_750_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,he    ight)
frame.rect = 3,734,784,909
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GTN_750_2]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
; connects GPS to copilot side if true.
CopilotSide = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to Audio Panel if true.
UseAudioPanel = true
; connects GPS to Transponder if true.
UseTransponder = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use transponder VFR code: USE_CODE,VFR_US,VFR_EUR
VFRmode = VFR_US
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = AVGAS
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), or -1 (auto detect Vref: 96)
TawsApprSpeed = -1
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 121)
TawsFlapSpeed = -1
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 999)
TawsGearSpeed = -1
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; main: CDI Key
AFMS.cdi_key = 
; main: Selected Course for GPS
AFMS.sel_crs_gps = 
; main: Selected Course for VLOC
AFMS.sel_crs_vloc = 
; main: V-Flag State (1: declutter
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: Airspace Labels
AFMS.airspace_labels = 
; nav : Mark On Target
AFMS.mark_on_target = 
; nav : RF Procedure Legs
AFMS.rf_procedure_legs = 
; vnav: Vertical Navigation Type (0: VCALC, 1: VNAV)
AFMS.vnav_enabled = 
; vnav: Transition To Approach
AFMS.vnav_trans_to_appr = 
; vnav: VDI Scale (ft)
AFMS.vnav_vdi_scale_factor = 
; vnav: Transition Altitude (180 = FL180)
AFMS.vnav_trans_altitude = 

[GTN_750_2.WINDOW]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 5416,637,625,595
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GTN_750_2.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GTN_650_2]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = false
; connects GPS to copilot side if true.
CopilotSide = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to Audio Panel if true.
UseAudioPanel = true
; connects GPS to Transponder if true.
UseTransponder = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use transponder VFR code: USE_CODE,VFR_US,VFR_EUR
VFRmode = VFR_US
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = AVGAS
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), or -1 (auto detect Vref: 84)
TawsApprSpeed = 84
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 110)
TawsFlapSpeed = 110
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 999)
TawsGearSpeed = 0
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; main: CDI Key
AFMS.cdi_key = 
; main: Selected Course for GPS
AFMS.sel_crs_gps = 
; main: Selected Course for VLOC
AFMS.sel_crs_vloc = 
; main: V-Flag State (1: declutter
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: Airspace Labels
AFMS.airspace_labels = 
; nav : Mark On Target
AFMS.mark_on_target = 
; nav : RF Procedure Legs
AFMS.rf_procedure_legs = 
; vnav: Vertical Navigation Type (0: VCALC, 1: VNAV)
AFMS.vnav_enabled = 
; vnav: Transition To Approach
AFMS.vnav_trans_to_appr = 
; vnav: VDI Scale (ft)
AFMS.vnav_vdi_scale_factor = 
; vnav: Transition Altitude (180 = FL180)
AFMS.vnav_trans_altitude = 

[GTN_650_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 984,933,830,350
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,350,830,350
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GTN_650_2.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 1,1398,1068,482
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GTN_650_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true 
PowerSource = AVIONICS_BUS
FuelType = AVGAS
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
VoicePref = MALE
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GTN_650_1.WINDOW]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 5116,1060,705,314
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,400,830,400
; display as popout window if true (requires XP11.1).
undocked = true 
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GTN_650_1.PANELS]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 1435,813,607,281
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 

 

For some reason in the vFlyteAir_Cherokee140Modern there is another file named: RealityXP.GNS.ini (which I don't have in the Carenado Bonanza F33A airplane)

RealityXP.GNS.ini

Spoiler

 

[GNS]
; comma separated list of gauges
gauges = 

[GNS_430_2]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = false
; connects GPS to copilot side if true.
CopilotSide = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Autopilot if true.
LinkOto = true
; connects CDI mode to NAV/GPS switch if true.
AutoNavGps = true
; override VLOC NAV# (1 or 2) or use 'RadiosPair' (0).
AutoNavSource = 0
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; enables Shadin Air Data computer if true.
UseAirData = true
; enables Shadin Fuel Data computer if true.
UseFuelData = true
; enables RYAN 9900BX TCAD if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enables device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
; override GPS Unit# (1 or 2) or use 'this unit#' (0) (XPL 10.30+ for GPS2).
AutoGpsSource = 0
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route to flight plan file if true (.fms)
AutoSavePln = false
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; cdi/obs: CDI Key (0: disable)
AFMS.cdi_key = 
; cdi/obs: Selected Course for GPS (0: disable)
AFMS.sel_crs_gps = 
; cdi/obs: Selected Course for VLOC (0: disable)
AFMS.sel_crs_vloc = 
; cdi/obs: V-Flag State (1: declutter)
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt)
AFMS.gps_selected = 
; main: COM Presets (1: enable)
AFMS.com_presets = 

[GNS_430_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1324,941,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; enable popup window if true (screen clickspot)
usepopup = true
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false

[GNS_430_2.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 571,276,490,276
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true
usemouse = true
; enable popup window if true (screen clickspot)
usepopup = true

[GNS_530_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
; connects GPS to copilot side if true.
CopilotSide = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Autopilot if true.
LinkOto = true
; connects CDI mode to NAV/GPS switch if true.
AutoNavGps = true
; override VLOC NAV# (1 or 2) or use 'RadiosPair' (0).
AutoNavSource = 0
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; enables Shadin Air Data computer if true.
UseAirData = true
; enables Shadin Fuel Data computer if true.
UseFuelData = true
; enables RYAN 9900BX TCAD if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enables device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
; override GPS Unit# (1 or 2) or use 'this unit#' (0) (XPL 10.30+ for GPS2).
AutoGpsSource = 0
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route to flight plan file if true (.fms)
AutoSavePln = false
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; cdi/obs: CDI Key (0: disable)
AFMS.cdi_key = 
; cdi/obs: Selected Course for GPS (0: disable)
AFMS.sel_crs_gps = 
; cdi/obs: Selected Course for VLOC (0: disable)
AFMS.sel_crs_vloc = 
; cdi/obs: V-Flag State (1: declutter)
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt)
AFMS.gps_selected = 
; main: COM Presets (1: enable)
AFMS.com_presets = 

[GNS_530_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1324,933,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; enable popup window if true (screen clickspot)
usepopup = true
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false

[GNS_530_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 1,2049,520,390
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true
usemouse = true
; enable popup window if true (screen clickspot)
usepopup = true

[GNS_430_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
UseSimGpsCmds = true
FuelType = AVGAS
PowerSource = AVIONICS_BUS
Rheostat.Display = 1
Rheostat.Buttons = 1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_430_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 640,503,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_430_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 570,276,493,273
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GPS_400_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to copilot side if true.
CopilotSide = false
; override GPS Unit# (1 or 2) or use 'this unit#' (0) (XPL 10.30+ for GPS2).
AutoGpsSource = 0
; override VLOC NAV# (1 or 2) or use 'RadiosPair' (0).
AutoNavSource = 0
; connects CDI mode to NAV/GPS switch if true.
AutoNavGps = false
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; enables Shadin Air Data computer if true.
UseAirData = true
; enables Shadin Fuel Data computer if true.
UseFuelData = true
; enables RYAN 9900BX TCAD if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enables device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route to flight plan file if true (.fms)
AutoSavePln = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; cdi/obs: CDI Key (0: disable)
AFMS.cdi_key = 
; cdi/obs: Selected Course for GPS (0: disable)
AFMS.sel_crs_gps = 
; cdi/obs: Selected Course for VLOC (0: disable)
AFMS.sel_crs_vloc = 
; cdi/obs: V-Flag State (1: declutter)
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt)
AFMS.gps_selected = 0
; main: COM Presets (1: enable)
AFMS.com_presets = 
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GPS_400_1.WINDOW]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1430,1060,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GPS_400_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
 

 

 

Edited June 23, 2021 by RXP

[RXP 2,338]

7 hours ago, eloyrfs said:

Before I had to reinstall windows and all programs in my PC everything was working great. But now I have an issue when trying to open the RealityXP GTN in these airplanes, the screen is all black with small letters at the bottom showing "Rebooting",

Hi,

the log file seems to indicate you've installed the Garmin trainer 6.62.4 alright and it doesn't show any particular error.

Can you also try on a default aircraft like the Baron 58 to compare whether there is something related with the configuration?
   I can't see anything special in your files though.

Can you please confirm the Garmin trainer is actually running in the background when waiting on the "Rebooting..." screen?
  open task manager with CTRL+SHIFT+ESC and find whether the trainer process is running

Otherwise, can you please let me know your purchase order # and the email it is registered to in a private message?

[thomascats 0]

Hey, I have the same problem so I won't open a new thread but try to provide more info to fix it.

For me I have planes that always work, no matter what, and then some planes that almost never work and have the problem.

Planes that always work: Just Flight Duchess 76, Torquesim BN-2, JF Archer, Thandra PC6.

Planes with the issue: Airfoilslabs King Air 350, sometimes the Bonanza.

I will add logs so you can compare:

JF Archer(Working GTN):

[GTN]
; comma separated list of gauges
gauges = GTN_750_1

[GTN_750_1]
; comma separated list of read only settings.
locked = CopilotSide, RadiosPair, AutoNavSource, UseAudioPanel, FuelType
; comma separated list of render targets.
drawto = WINDOW, PANEL3D
; is the master device if true.
MasterDevice = true 
Rheostat.Display = 0
Rheostat.Buttons = 2
LinkCrs = true 
LinkObs = true 
LinkVor = true 
PowerSource = AVIONICS_BUS
FuelType = AVGAS
; TAWS approach air speed (knots) or -1 (auto detect Vref: 88)
TawsApprSpeed = 88
; TAWS flap extension speed (knots) or -1 (auto detect Vfe: 102)
TawsFlapSpeed = 87
; TAWS gear extension speed (knots) or -1 (auto detect Vle: 0)
TawsGearSpeed = 0
VoicePref = MALE
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
UseTcadAiCount = false
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
AutoCdiSrc = true 

[GTN_750_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2693,2038,830,790
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 
; display as popout window if true (requires XP11.1).
undocked = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,445,299,445
; auto hide in external view if true.
autohide = false

[GTN_750_1.PANEL3D]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1231,2010,804,948
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = true 
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 

King Air(works only after fresh load, wont work it I start from cold and dark from example or change states):

[GTN]
; comma separated list of gauges
gauges = GTN_750_1, GTN_750_2

[GTN_750_1]
locked = MasterDevice, NavDbType, HardwareDevice, HardwareIdx, LinkCrs, LinkObs, AutoNavGps, UseAudioPanel, UseTransponder, AutoGpsSource, AutoNavSource, AutoSavePln, LinkSimGps, LinkOto, LinkHsi, LinkVor, CopilotSide, AutoCdiSrc, RadiosPair, ComputerTime, CdiScale, GsiScale, UseAirData, UseFuelData, UseRyanTcad, RyanTcadVolume, UseTcadAiCount, UseFailures, UseSimGpsCmds, VFRmode, VFRcode, PowerSource, OwnshipIcon, FuelType, TawsMode, TawsSurface, TawsMinLength, TawsApprSpeed, TawsFlapSpeed, TawsGearSpeed, ReduceRate, Rheostat.Display, Rheostat.Buttons, VoicePref, MasterVolume, NoAudioFocus, CpuAffinity, AFMS.cdi_key, AFMS.sel_crs_gps, AFMS.sel_crs_vloc, AFMS.v_flag_declutter, AFMS.gps_selected, AFMS.auto_nav_appr, AFMS.airspace_labels, AFMS.mark_on_target, AFMS.rf_procedure_legs, AFMS.vnav_enabled, AFMS.vnav_trans_to_appr, AFMS.vnav_vdi_scale_factor, AFMS.vnav_trans_altitude
; comma separated list of render targets.
drawto = WINDOW, PANEL3D
; is the master device if true.
MasterDevice = true
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
; connects GPS to HSI course motor if true.
LinkCrs = true
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = true
; sync CDI Mode to NAV/GPS switch if true (GPS -> SIM).
AutoNavGps = false
; connects GPS to Audio Panel if true.
UseAudioPanel = false
; connects GPS to Transponder if true.
UseTransponder = false
; override GPS Unit# (1 or 2) or use 'this unit#' (0) (XPL 10.30+ for GPS2).
AutoGpsSource = 1
; override VLOC NAV# (1 or 2) or use 'RadiosPair' (0).
AutoNavSource = 1
; saves the active route to flight plan file if true (.fms).
AutoSavePln = true
; updates Simulator GPS flight plan if true.
LinkSimGps = true
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Copilot side if true.
CopilotSide = false
; sync NAV/GPS switch to CDI Mode if true (SIM -> GPS).
AutoCdiSrc = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; enables Shadin Air Data computer if true.
UseAirData = true
; enables Shadin Fuel Data computer if true.
UseFuelData = true
; enables RYAN 9900BX TCAD if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; enables device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; selects transponder VFR code: USE_CODE,VFR_US,VFR_EUR
VFRmode = VFR_US
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets device power source: 
; AUTO,ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AUTO
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; sets fuel type: AUTO,AVGAS,JETA,JETB,DIESEL
FuelType = AUTO
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots) or -1 (auto detect Vref: 132)
TawsApprSpeed = -1
; TAWS flap extension speed (knots) or -1 (auto detect Vfe: 200)
TawsFlapSpeed = -1
; TAWS gear extension speed (knots) or -1 (auto detect Vle: 999)
TawsGearSpeed = -1
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; sets voice type: MALE,FEMALE
VoicePref = FEMALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32, 0: last core, -1: auto, -2: all (GTN_6620+).
CpuAffinity = -1
; main: CDI Key (0: disable)
AFMS.cdi_key = 
; main: Selected Course for GPS (0: disable)
AFMS.sel_crs_gps = 
; main: Selected Course for VLOC (0: disable)
AFMS.sel_crs_vloc = 
; main: V-Flag State (1: declutter)
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt)
AFMS.gps_selected = 
; main: Engage Autopilot APPR (1: enabled)
AFMS.auto_nav_appr = 
; main: Airspace Labels (0: disable)
AFMS.airspace_labels = 
; nav : Mark On Target (1: enable)
AFMS.mark_on_target = 
; nav : RF Procedure Legs (1: enable)
AFMS.rf_procedure_legs = 
; vnav: Vertical Navigation Type (0: VCALC, 1: VNAV)
AFMS.vnav_enabled = 
; vnav: Transition To Approach (0: disable)
AFMS.vnav_trans_to_appr = 
; vnav: VDI Scale (default: 500ft)
AFMS.vnav_vdi_scale_factor = 
; vnav: Transition Altitude (default: FL180)
AFMS.vnav_trans_altitude = 

[GTN_750_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 727,958,830,790
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true 
; display as popout window if true (requires XP11.1).
undocked = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790
; auto hide in external view if true.
autohide = false

[GTN_750_1.PANEL3D]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1022,1023,512,628
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GTN_750_2]
locked = MasterDevice, NavDbType, HardwareDevice, HardwareIdx, LinkCrs, LinkObs, AutoNavGps, UseAudioPanel, UseTransponder, AutoGpsSource, AutoNavSource, AutoSavePln, LinkSimGps, LinkOto, LinkHsi, LinkVor, CopilotSide, AutoCdiSrc, RadiosPair, ComputerTime, CdiScale, GsiScale, UseAirData, UseFuelData, UseRyanTcad, RyanTcadVolume, UseTcadAiCount, UseFailures, UseSimGpsCmds, VFRmode, VFRcode, PowerSource, OwnshipIcon, FuelType, TawsMode, TawsSurface, TawsMinLength, TawsApprSpeed, TawsFlapSpeed, TawsGearSpeed, ReduceRate, Rheostat.Display, Rheostat.Buttons, VoicePref, MasterVolume, NoAudioFocus, CpuAffinity, AFMS.cdi_key, AFMS.sel_crs_gps, AFMS.sel_crs_vloc, AFMS.v_flag_declutter, AFMS.gps_selected, AFMS.auto_nav_appr, AFMS.airspace_labels, AFMS.mark_on_target, AFMS.rf_procedure_legs, AFMS.vnav_enabled, AFMS.vnav_trans_to_appr, AFMS.vnav_vdi_scale_factor, AFMS.vnav_trans_altitude
; comma separated list of render targets.
drawto = WINDOW, PANEL3D
; is the master device if true.
MasterDevice = false
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
; connects GPS to HSI course motor if true.
LinkCrs = true
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = true
; override GPS Unit# (1 or 2) or use 'this unit#' (0) (XPL 10.30+ for GPS2).
AutoGpsSource = 2
; override VLOC NAV# (1 or 2) or use 'RadiosPair' (0).
AutoNavSource = 2
; sync CDI Mode to NAV/GPS switch if true (GPS -> SIM).
AutoNavGps = false
; connects GPS to Audio Panel if true.
UseAudioPanel = false
; connects GPS to Transponder if true.
UseTransponder = false
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Copilot side if true.
CopilotSide = true
; sync NAV/GPS switch to CDI Mode if true (SIM -> GPS).
AutoCdiSrc = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; enables Shadin Air Data computer if true.
UseAirData = true
; enables Shadin Fuel Data computer if true.
UseFuelData = true
; enables RYAN 9900BX TCAD if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; enables device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = true
; saves the active route to flight plan file if true (.fms).
AutoSavePln = false
; selects transponder VFR code: USE_CODE,VFR_US,VFR_EUR
VFRmode = VFR_US
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets device power source: 
; AUTO,ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AUTO
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; sets fuel type: AUTO,AVGAS,JETA,JETB,DIESEL
FuelType = AUTO
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots) or -1 (auto detect Vref: 132)
TawsApprSpeed = -1
; TAWS flap extension speed (knots) or -1 (auto detect Vfe: 200)
TawsFlapSpeed = -1
; TAWS gear extension speed (knots) or -1 (auto detect Vle: 999)
TawsGearSpeed = -1
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; sets voice type: MALE,FEMALE
VoicePref = FEMALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32, 0: last core, -1: auto, -2: all (GTN_6620+).
CpuAffinity = -1
; main: CDI Key (0: disable)
AFMS.cdi_key = 
; main: Selected Course for GPS (0: disable)
AFMS.sel_crs_gps = 
; main: Selected Course for VLOC (0: disable)
AFMS.sel_crs_vloc = 
; main: V-Flag State (1: declutter)
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt)
AFMS.gps_selected = 
; main: Engage Autopilot APPR (1: enabled)
AFMS.auto_nav_appr = 
; main: Airspace Labels (0: disable)
AFMS.airspace_labels = 
; nav : Mark On Target (1: enable)
AFMS.mark_on_target = 
; nav : RF Procedure Legs (1: enable)
AFMS.rf_procedure_legs = 
; vnav: Vertical Navigation Type (0: VCALC, 1: VNAV)
AFMS.vnav_enabled = 
; vnav: Transition To Approach (0: disable)
AFMS.vnav_trans_to_appr = 
; vnav: VDI Scale (default: 500ft)
AFMS.vnav_vdi_scale_factor = 
; vnav: Transition Altitude (default: FL180)
AFMS.vnav_trans_altitude = 

[GTN_750_2.WINDOW]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2562,380,830,790
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; display as popout window if true (requires XP11.1).
undocked = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790
; auto hide in external view if true.
autohide = false

[GTN_750_2.PANEL3D]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1535,1023,512,628
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

General log:

21/06/23 08:01:17.405 11612 -    ] # win.xpl version 2.5.28.2
21/06/23 08:01:17.405 11612 INFO ] 

21/06/23 08:01:19.485 11612 -    ] # rxpGtnSim64.dll version 2.5.28.0
21/06/23 08:01:19.484 11612 INFO ] 
21/06/23 08:05:05.240 11612 INFO ] GTN 750.1 - TRAINER 6624
21/06/23 08:05:07.350 11612 INFO ] GTN 750.2 - TRAINER 6624
21/06/23 08:06:50.729 07492 INFO ] GTN 750.1 - TRAINER 6624

Thanks for the help, I will provide any info you need.

Edited June 24, 2021 by RXP

[fppilot 4,391]

On 6/23/2021 at 8:59 AM, eloyrfs said:

Hello, I recently had to reinstalled windows and all programs (including X-Plane11).

When I read something like this my first question is this.  When you reinstalled RXP GTN, specifically what RXP installer did you use and from where?  I had a similar issue last Fall and was installing from an update installer.  I found that downloading a fresh ecommerce installer direct from the RXP products page (as if you were first purchasing it) and using it instead cured my issue.  I will push you back through the F1 ecommerce process, but when there just click reinstall.  You will need your license code and the email address you originally used when you purchased the GTN.  If you log in to Flight1 with that email address you can look up your license code there if you don't have it stored yourself.

Edited June 24, 2021 by RXP

[RXP 2,338]

3 hours ago, thomascats said:

For me I have planes that always work, no matter what, and then some planes that almost never work and have the problem.

Do you mean for those which aren't working, the GTN displays a "Rebooting..." text?

In this case, can you please also cross check these:

20 hours ago, RXP said:

Can you also try on a default aircraft like the Baron 58 to compare whether there is something related with the configuration?
   I can't see anything special in your files though.

Can you please confirm the Garmin trainer is actually running in the background when waiting on the "Rebooting..." screen?
  open task manager with CTRL+SHIFT+ESC and find whether the trainer process is running

Otherwise, can you please let me know your purchase order # and the email it is registered to in a private message?

 

And can you please also both of you cross-check your anti-virus program for any possible RXP quarantined file(s) (filenames should start with "rxp" )

Edited June 24, 2021 by RXP

[eloyrfs 0]

On 6/23/2021 at 9:15 PM, RXP said:

Hi,

the log file seems to indicate you've installed the Garmin trainer 6.62.4 alright and it doesn't show any particular error.

Can you also try on a default aircraft like the Baron 58 to compare whether there is something related with the configuration?
   I can't see anything special in your files though.

Can you please confirm the Garmin trainer is actually running in the background when waiting on the "Rebooting..." screen?
  open task manager with CTRL+SHIFT+ESC and find whether the trainer process is running

Otherwise, can you please let me know your purchase order # and the email it is registered to in a private message?

Hello... Sorry for the delayed response. I finally got the chance to look into your recommendations. I checked in the default B58 and the GTN750 works fine (as a pop out screen, not embedded in the 3D cockpit). Something I realize is that when try to open the F33A with GTN750 and black screen is showing "Rebooting" is that in task manager "GTN Simulator.exe" will appear under Apps ->"X-Plane" and the trainer is not running anywhere. If I manually (in task manager) end the task of "GTN Simulator.exe" under X-Plane, then it fixes the issue. The "Rebooting" message from the black screen goes away and after start-up procedure the GTN comes ON normally. I know there is still something wrong somewhere as it was perfect before I re-installed windows and all programs. But at least I can have it working after few extra manual steps.

 

Eloy

[eloyrfs 0]

Please let me know if you still would like me to send you DM with my order number.

Thanks,

Eloy

[RXP 2,338]

@eloyrfs Since it is is working fine after killing the process manually, I guess there is no need for the order number for now.

However, I find it peculiar you'd have to do this manipulation.

Just so that I understand this correctly, this is happening when you're loading the F33A in a cold and dark state isn't it?

Could you detail a little more this "start-up procedure" you're refering to?

Also, can you please tell me what electric power source is the GTN configured with in this aircraft, and just to cross-check this for the time being, what about changing it to always on so that we can see whether this aircraft is not powering up the electrical bus the GTN is connected to?

[DenS 3]

I have had the 'Rebooting..." problem in the Airfoil King Air 350 v 1.5 using the Ither 5.0 install.It is Intermittent with Rebooting more than successful starts.

Eloy's Task Manager fix works up to clear the message and start the 750.  I thought the issue was with the Ither install. Guess not. Here there are two "GTN Simulator.exe" lines, there is a 725 running in the background. Glad to have a fix THANKS.

[RXP 2,338]

On 8/25/2021 at 6:16 PM, DenS said:

Here there are two "GTN Simulator.exe" lines, there is a 725 running in the background. Glad to have a fix THANKS.

HI,

I'm not sure whether you're saying "you're glad to have a fix" (resolved) or "you'd be glad to have a fix" (not resolved).

Can you please also let me know what is the Ither 5.0 ?!

[DContreras96 0]

I am having a similar problem.  Here are a couple of points before I provide the information that has been requested above:

1. I was using the Reality-XP GTN 750 just fine until a Windows update occurred when I shut down my computer on Friday, October 1.  When I tried to use my simulator on Saturday, October 2, the GTN 750 only had the black screen with the "rebooting" message at the bottom right.
2. I was using the Carenado F33 Bonanza v1.1, which sounds like the same model as one of the other users.  After I noticed the problem, I tried with the Just Flight Duchess Model 76, and the Carenado Cessna 340 II v1.1.  The same message occurred in all of those aircraft.
3. I did try using the Baron 58 that was included with X-Plane 11 and it was working until today. 
4. I was able to get the Bonanza to work by launching the Baron 58 and then changing aircraft to the Bonanza.  However, there were still some issues.  I followed the troubleshooting guide to adjust my virus quarantine files.  I have allowed them as apps on my computer.   I was having issues because the program kept doing a force shut down.  I ended up shutting down my computer and rebooting.  Upon reboot, I could not get the GTN 750 to work in any aircraft, including the Baron 58.
5. In the plug-in drop down in x-plane, I deselected the 750 as the master device, but that did not help.  Every time I tried to deselect the 750, i.e., turn it off, I would get a program not responding message.  Put another way, selecting or deselecting the GTN 750 in Com1 from the drop down resulted in an instant crash.
6. I am running x-plane 11.55

Here is the rxpGTN.xpl.log file:

21/10/17 20:56:15.036 02056 -    ] # win.xpl version 2.5.28.5
21/10/17 20:56:15.036 02056 INFO ] 

Here is the rxpGtnSim.dll.log file:

21/10/17 20:56:17.130 02056 -    ] # rxpGtnSim64.dll version 2.5.28.0
21/10/17 20:56:17.130 02056 INFO ] 
21/10/17 20:56:50.605 02056 INFO ] GTN 750.1 - TRAINER 6624
21/10/17 21:00:01.902 05180 INFO ] GTN 750.1 host application exited unexpectedly.
21/10/17 21:00:06.905 05180 INFO ] self-terminating orphaned GTN 750.1

I have checked the task manager and the GTN750 trainer is not running when I run x-plane 11

Here is my RealityXP.GTN.ini file:

Spoiler

 

[GTN]
; comma separated list of gauges
gauges = GTN_750_1

[GTN_750_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true 
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
LinkCrs = true 
LinkObs = true 
LinkVor = true 
UseSimGpsCmds = true 
LinkSimGps = true 
AutoSavePln = true 
AFMS.auto_nav_appr = 1

[GTN_750_1.WINDOW]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1233,832,800,880
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,395,415,395
; display as popout window if true (requires XP11.1).
undocked = true
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = true
; auto hide in external view if true.
autohide = false

[GTN_750_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

 

*** I uninstalled the GTN 750 again and tried to reinstall.  I have the saved zip file and I extracted the files executable to my c:\RealityXP folder.  When I ran the installation program, it got to the "Select Additional Tasks" page.  I selected the 1st and 3rd, and I have selected all three.  The result is the same:  I get "Download failed:  File not found (404)."  It told me to recheck my internet connection, but that is not the issue.  At this point, I am not able to reinstall the GTN 750 on x-plane 11.

I appreciate any help you can provide.  Thank you.

Edited October 18, 2021 by RXP
Updated information

[RXP 2,338]

3 hours ago, DContreras96 said:

I get "Download failed:  File not found (404)."  It told me to recheck my internet connection, but that is not the issue.  At this point, I am not able to reinstall the GTN 750 on x-plane 11.

Hi,

please make sure to download and run the latest e-commerce enabled installer from our website instead, then enter your F1 account credentials and press the REINSTALL button.

[DContreras96 0]

On 10/17/2021 at 7:40 PM, RXP said:

Hi,

please make sure to download and run the latest e-commerce enabled installer from our website instead, then enter your F1 account credentials and press the REINSTALL button.

I was able to reinstall.  I got the GTN 750 1 to work after I tried using the GTN 750 2.  It occurred to me that maybe there was a conflict with my GNS 530 from RealSimGear.  I disabled the GNS 530, that was how I got it to work on GTN 750 1.  When I tried again tonight, I could not get it to start, but I am able to use it on GTN 750 2, just assigning the Com1/Nav1.  I do not understand why this would happen after a Windows update, which is when it triggered.  Also, when it runs through the test screens and the HSI is supposed to have half left deflection, register the OBS setting, and have a half up on the vertical navigation, I am getting no deflection, no vertical navigation indicator, and the indicator is close to but not on the OBS setting.  

[RXP 2,338]

There seems to be 2 different unrelated issues isn't it?

The latter, the boot page indication, can you cross check you've enabled the correct GTN settings? (Link HSI etc...)

For the former, the GTN #1 not working, there is no particular reasons #1 won't work if #2 is working. It sounds as-if there is a background process preventing the GTN trainer process to either run properly (not GTN #1) or to close properly (you had to manually kill the process previously).

Do you use any particular anti-virus and/or firewall other than Windows stock ones?

[DContreras96 0]

Just the stock Windows anti-virus.  No firewall.