Hello  🙂

P2A v2.6.2.4_PublicBeta2e - AIRAC Cycle 2112
I have a problem with the VFR flight plans:
For example with the LFRZ/NTS/LFEY flight plan and the RNAV 32 transition GIGEX approach, I can validate this flight plan in P2A, but when I want to transmit it (File function), the "File" button does not turn green. 
I also have this problem with other VFR flight plans.
If I request VRF clearance, I always get the message as shown in the screenshot below ("say again request with destination airport")
I don't know what the problem is.

Note: with P2A release v2.6.2.3-r2 and AIRAC 2112, the transmission of the VFR flight plan is fine, the "File" button turns green and I can transmit the VFR flight plan to ATC.

 

If you want to file a plan with an IFR procedure in it, you must file an IFR flight plan, not a VFR flight plan.

You could file a VFR plan, with no approach, then request vectors to an approach when you get near the destination.  Just be sure to make the request far enough out so you get good vectors.

Dave

Thank you for this answer.

Another test with the VFR flight plan: LFRZ => NTS => LFEY (this time without RNAV arrival) - AIRAC 2112

1 - With P2A v2.6.2.4_PublicBeta2e, I have the same problem: I cannot transmit the VFR flight plan, the "File" button does not turn green. When I ask for VFR clearance, I get the same SayIt message.

-----------------------------

2 - With the P2A release v2.6.2.3-r2, there is no such problem with the same VFR flight plan. The flight plan transmission works fine (the "File" button turns green) and the VFR clearance request is OK.

---------------------------

The two corresponding log files: (we see errors in the flight plan management in the Pilot2ATC v2.6.2.4 PublicBeta2e log file)

https://www.dropbox.com/s/oxzsd86u4ntde1b/Log.zip?dl=1

 

 

Edited December 30, 20214 yr by JPR

Looks like a bug in 2e.  Should be fixed in the next update.

Thanks for the report.
Dave