I am unable to control the steering for taxi and takeoff.  I wander all over the place.  I have the Saitek Pro Flight Rudder Pedals  I have tried several settings in the sensitivity settings and nothing helps.

Learning to fly the FBY A32NX.  Have had no problems with this on GA aircraft.

Thanks,

Roy

Edited June 1, 20224 yr by Roy Warren

 

See if this video helps.  It is likely that you have the steering tiller also being activated so you need to set it up properly.  I think many are having this issue thinking it is sensitivity of rudder pedals.

 

 

Thanks.  I'll try the video

Roy

9 minutes ago, Flic1 said:

 

See if this video helps.  It is likely that you have the steering tiller also being activated so you need to set it up properly.  I think many are having this issue thinking it is sensitivity of rudder pedals.

 

 

The Fenix 320 and the FBW A32NX are unrelated.

 

@Roy Warrenhttps://docs.flybywiresim.com/fbw-a32nx/feature-guides/nw-tiller/

This should help.

Video is for the Fenix.  I have the Fly By Wire A32NX.  No tiller on it.  Did have a settings for the tiller on the FlyPad that was set to Disable. I changed it to Enable and then I had no control at all.

Still looking for more suggestions.

Roy

40 minutes ago, Roy Warren said:

I am unable to control the steering for taxi and takeoff.  I wander all over the place.

Can you explain a bit more? If it steers opposite for a moment you need to disable the auto-rudder.

You're right. I was trying different things and I disabled the auto rudder.  Everything is normal now.

Thanks for your help. BTW The FBW AA32NX does have that tiller but it is marked INOP. 

Roy

50 minutes ago, Roy Warren said:

Video is for the Fenix.  I have the Fly By Wire A32NX.  No tiller on it.  Did have a settings for the tiller on the FlyPad that was set to Disable. I changed it to Enable and then I had no control at all.

Still looking for more suggestions.

Oops!  Sorry about that....I have seen this issue in the Fenix and completely missed you said FBW!  Glad you got it sorted...

1 hour ago, Roy Warren said:

Video is for the Fenix.  I have the Fly By Wire A32NX.  No tiller on it.  Did have a settings for the tiller on the FlyPad that was set to Disable. I changed it to Enable and then I had no control at all.

Still looking for more suggestions.

Roy

Make sure to set the tiller axis as per the doc I've linked above if you have twist axis+rudder pedals. Else, if your tiller and rudder are being controlled by the same axis, the separate tiller on the EFB option should be disabled, like you observed previously

Edited June 1, 20224 yr by sidnov
grammar

4 hours ago, Roy Warren said:

Thanks for your help. BTW The FBW AA32NX does have that tiller but it is marked INOP. 

The FBW A32NX does have a tiller that is independent of the rudder axis and it works very well. At least it does in the Experimental version.

Edited June 1, 20224 yr by RaptyrOne