Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

FSiPanel Help

Featured Replies

I am confused with FSiPanel. I have followed the instructions in the manual, and FSiPanel sets up the approach. However, it does not set my plane up on the glidepath with VOR/LOC and G/S engaged (this is for a direct ILS approach). It sets it up in ALTITUDE HOLD mode. What am I doing wrong?? Do I need to input the ILS frequency manually prior to configuring the approach? I had assumed that FSiPanel would do this for me.

ATC is also contacting me, and I would prefer to disable this.

EDIT: Amazing what you can miss when you are not going through each procedure prior to final approach. I need to press the APP button 🤦‍♂️

Edited by Christopher Low

Christopher Low

AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme

UK2000 Beta Tester

  • Author

On a side note, I do not seem to be asked to press and hold the BRAKE for 3 seconds to start the approach. It just sets off on its own, so I do not have much time to think about it. Is that normal?

Christopher Low

AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme

UK2000 Beta Tester

  • Author

Well, it worked properly when I tried it again. The only difference is that I set it up after loading FSiPanel from the desktop icon, and this gave me the "press brake for 3 seconds to start the approach" instruction. That did not seem to happen when I used the icon on the Asobo menu bar for the setup procedure 😕

Christopher Low

AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme

UK2000 Beta Tester

It seems you are new with FSiPanel? For me it is one of greatest apps for the sim. I'm using it quite often with the PMDGs 737 and 777. I recommend to start your approach to any given airport via FIX/STAR/Transition etc. with beforehand planning in Navigraph. With that you can fly a complete STAR procedure. Usually I load my flight on the runway I want later to land on. Then I start FSiPanel. With PMDG you can also load a predefined cockpit regarding fuel, fuel pumps, payload etc. before you start FSiPanel.

- Harry 

9800x3D (Strix x870e-E)  -  64GB RAM (DDR5 6000, CL 30)  -  RTX 5090, 34'' 1440p OLED HDR  -  Windows 11 Pro (1TB M.2)  -  MSFS 2024 (MS Store, 4TB M.2).

  • Author

Yes, FSiPanel is completely new to me. I do set up the payload and fuel prior to starting FSiPanel, and I am looking forward to simply being able to make approaches and landings at multiple airports....one after the other. Probably an autistic trait, but it floats my boat :smile: I also want to set up special approaches, like the 09 approach at LGSM Samos, or the circle to land 34 approach at LGMK Mykonos.

Christopher Low

AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme

UK2000 Beta Tester

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.