Juul Tango

Thanks,I forgot to mention that I only have FS9...Juul Tango,Hasselt, Belgium.

Hello,Can it be confirmed that Map! (form feelThere) functions well in a VISTA 64bit-environment?Has anyone had problems in this context?Thanks,Juul Tango,Hasselt, Belgium.

Has anyone some experience using Voice Buddy for executing Radar Contact commands?Can Voice Buddy be programmed in relation to Radar Contact?(I put the same thread on the Radar Contact forum)I have been using Game Commander for a long time, but for one or another reason, since a couple of days the programme doesn't react anymore, and the Game Commander website is down.Thanks on beforehand,Juul Tango,Near Kiewit, the oldest airfield in Belgium...

Has anyone some experience using Voice Buddy for executing RC commands (in FS9)?Can Voice Buddy be programmed in relation to RC?Thanks on beforehand,Juul Tango,Near Kiewit, the oldest airfield in Belgium...

Thank you very much!! Very usefull document you developped!!Juul Tango,Hasselt, Belgium

Hello,Can someone help me with a more or less "standardised" checklist for the Aeroworx' Super King Air B200? Or where to find it?Thanks on beforehand,Juul Tango,Hasselt, Belgium.

Never, as far as I know, installed nDac pro.Uninstalled RC (and ASV6), deleted all files in nDac folder and re-installed RC (and ASV6) - no problems anymore....Kind regards,Juul Tango,Hasselt Belgium.

I do not remember having installed nDac base pro. Could it be that this software is installed together with Radar Contact?Juul Tango,Hasselt, Belgium

Since I cleaned up my PC some weeks ago (drive cleaner, file wiper, defrag), when now starting up ASv6 (and also Radar Contact) , I always get the message "cannot find nDac base pro.msi" or something to that extent. By clicking "Cancel", ASv6 continues to load, and works fine, but it is not really the right way to do.Could it be that nDac base pro is installed by the first install of AS? How can I remedy to this?Does anyone have a good idea?Many thanks on beforehand,Juul Tango,Hasselt, Belgium.

Since I cleaned up my PC some weeks ago (drive cleaner, file wiper, defrag), when now starting up Radar Contact , I always get the message "cannot find nDac base pro.msi" or something to that extent. By clicking "Cancel", RC continues to load, and works fine, so no real problem so far. But now by trying to install RC 4.2, I get the same message, and since the file "nDac base pro.msi" cannot be found anymore on my PC, I can only abort the installation. Does anyone have an idea how to tackle this? Many thanks on beforehand, Juul Tango,Hasselt, Belgium.

Hallo,Reading your post, I have a very specific question. You say that you plan your route with FSBuild using the AS6 data. I also use FSBuild for routeplanning, but how can I do this based on AS6 data? Thanks,Juul Tango,Hasselt, Belgium.

Hello,I was preparing for a flight from DBBB to DRRN and I downloaded weather at 13.30 local time (on March 26).To my big surprise, it was snowing in the center of Africa while a temperature of 29

Hello,I tried to launch RCWavUtil, but then I get the following message: "Failed to load control MCI32.OCX. Your version of MCI32.OCX may be outdated. Make sure you are using the version of the control that was provided with your application."Can someone direct me how to solve this issue?Thanks,Juul Tango,Hasselt, Belgium.

Hello,In most of the pages in AdvanceDisplay, an option "Say Again" is available. Nevertheless, during some phases (e.g. at the start of a holding), this option is apparently disabled. If you didn't understand the controller, is there no way that his request be repeated? Can the option "Say Again" not always be made available?Thanks,Juul Tango,Hasselt, Belgium.

Hello everyone,First of all, many thanks to John and his team for the wonderful product; it is a real pleasure to fly with it.One question though. In the previous version RC3, if the distance to the next waypoint was greater than (if I am not mistaken) 60 miles, you could get from ATC, on a heuristic basis, an instruction to deviate for weather or traffic. In all the flights I did already with RC4 (more than 15), I never got such an instruction. Has this gone in RC4?Kind regards,Juul Tango,Hasselt, Belgium.

Hello,I learned from this forum that RC3 and the new Level-D 767 can be used together without problems.A question though. If I save a flight by the "save flight" utility offered by RC3 and then (re)load it (also through RC3), can I resume the flight where I left it? Is in that case my FMC still well programmed and can I continue flying, knowing that Level-D states that every flight can be saved via FS9 and resumed without problems. (I experienced for instance that saving and reloading flights by RC3 is very difficult, not to say impossible with the PMDG 737NG, since the FMC looses all data).Thanks on beforehand,Juul Tango.

Can someone inform me if the same is true if using Radar Contact? In other words, if a save a 767-flight by the Radar Contact "save flight" utility, and I (re)load the saved flight, does all resume in the state it was saved? (This is for instance not the case for the PMDG 737-NG).Thanks,Juul Tango

Hello,I am a dedicated fan of RC 3.1 and I am happy to hear that RC 3.1 works fine together with FS2Crew. After installing FS2Crew, I tried to combine both fantastic add-ons, but I have still some questions to more experienced users.In which stage should RC best be initiated? It seems to me that this should be done in a very early stage, because you need some data coming from RC (such as altimeter value form the Wx briefing and transponder code from Clearance) as input for FS2Crew. But by asking RC this weather briefing, it keeps repeating it all the time. Switching to clearance, messages for other A/C are transmitted. These messages make it very difficult, not to say impossible, to understand FS2Crew voices.Has anyone inputs on this? How to lower RC voice volume and to make FS2Crew messages more understandable?Thanks on beforehand for your replies,And Happy Newyear!!Luc Ballet,Hasselt, Belgium.

Hello,I also have encountered this "problem". I thought it was because if waypoints are far apart one from each other, and taking into account that on a sphere, the shortest way between two points is not necessarely a straight line, and I could live with it. Anyhow, if the ATC instructions were executed, I arrived where I had to arrive...Kind Regards,Juul Tango,Hasselt, Belgium.

Hello,I have had the same problem. I had installed the Netherlands 2000 scenery, and EBBR covered all over with trees. Uninstalled this scenery and trees gone......Juul Tango,Hasselt, Belgium.

I always fly with Radar Contact - the best add-on I have...Juul Tango,Hasselt, Belgium

Hello,Can anyone help me with a scenery file for EBZH (Airport Kiewit, Hasselt - Belgium).Many thanks,Juul Tango.

Skyhog,I do agree with you. Before I had the 800-900 series (with update) installed, I never had this problem either.Juul Tango,Hasselt, Belgium

I also never fly without using AS2004 - never had a single problem. Also never had issues when flying PMDG 737NG planes.Juul Tango,Hasselt, Belgium.

It is valid for all versions, latest updates.Juul Tango,Hasselt, Belgium.