Melflight

Nice job !! The sound track was a perfect selection. Just out of curiosity how long did it take you to put it all together.Thanks,Mel M.

Hey Salvador,Thanks for the input but Bob has found the problem.In FSUIPC>Joystick Calibration>Spoilers and Flaps have to show Axis not processed, mine were not.Thanks,Mel M.

Hello all,I had issues as noted with my flaps/spoilers which has now been corrected with many thanks to Bob and any one else involved. What impresses me most is the response was quick and my problem never got pushed aside. Tinmouse truly means it when they say support (unlike some of the complaints I've read on some payware forums), especially since this is a freeware project. This dedication is greatly appreciated. This 737-200 has always been a favorite since the very start and always will because it just keeps getting better.Hats off to all involved and keep up the great work!!Thanks,Mel M.

Hey Bob,Found support address and all sent as requested.Mel M.

Hi Bob,I deleted the fs9 config. and let fs9 build a new one. The flaps/spoilers worked ok for a bit (flaps with lever went to proper positions, speed brake lever moved/deployed properly) and then suddenly it went back to the same problem. Once the spoilers are moved up they won't come back down. When I use "/" key it shows "wing extending" the spoilers start to breifly move down but pop back up with "wing folding" (never used to show "wing extend/fold" before when using the "/" key).I've tried most of my other addons and the fs9 supplied aircraft and the flaps/spoilers work as they should.I'll e-mail your requests including a copy of my fs9 config. Will also send an interesting jpeg of FSUIPC--Joystick Calibration--Spoilers(with spoiler lever down and flap lever up) and sometimes you can't reset the spoilers to zero in FSUIPC.What is the support e-mail address??Thanks again,Mel M.

Hi Bob,Well it was pure coincidence that the flap/spoiler issue happened with the latest update because I reinstalled to the point where it was working ok before and the problem is still there. I guess I should have known better when you said no others were having problems and all the other versions/updates I installed went smoothly.I appologize!!I just don't know what happened to create this....don't remember making any other changes at the same time.I appreciate your help and if you have any other suggestions....Thanks,Mel M.

Hi Bob,For years I've been using a G-Force flight yolk and CH pedals with no change in any drivers. I don't have any buttons assigned to flaps or spoilers on the yolk (only trim, brakes and wide view).I'm going to remove and reinstall again, except for the latest update, just to see what happens.Let you know the result.Thanks,Mel M.

Bob,I checked and had FSUIPC 3.70 in the right place (even overwrote it to make sure).I removed and reinstalled the plane from scratch, same issue with the flaps and also noted spoilers will go up but don't come back down.I'm going to remove it again and reinstall it without V1.21 update. Like I had mentioned, I've never had any problems/errors with any of the other versions/updates, everything worked ok before V1.21. Is this update control hardware specific by chance??Thanks,Mel M.

Bob, There is no axis assignment for flaps, have only F6/F7 (I deleted joystick assigments and F5/F8 and alt. flap sw. is down/guarded. Here's what it's doing;flap lever up..flaps on gauge indicates up.F7 to flap lever 1.. flaps ext. to 40 on gauge.F7 to flap lever 2 to 10.. no flap movement.F7 to flap lever 15..flaps retract to 2 on gauge.F7 to flap lever 25..flaps ext. to 10 on gauge.F7 to flap lever 30..flaps ext. to 25 on gauge.F7 to flap lever 40..flaps ext. to 40 on gauge.F6 to flap lever 30..flaps retract to 25 on gauge.F6 to flap lever 25..no flap movement.F6 to flap lever 15..flaps retract to 2 on gauge.F6 to flap lever 10..flaps ext. to 40 on gauge.F6 to flap lever 5/2/1.. no flap movement.Very strange!!Mel M.

Hello all,I've had no problems at all (with this great 737-200, super job to all involved)until I installed version 1.21 Update. The only issue I've noticed off the get go is my flaps are not working correctly. For the most part it's either no flaps or full flaps. Moving the flap lever manually, the + or - on the gauge or using the F keys doesn't put the flaps where they should be. Using the + or - on the gauge, doesn't move the flap lever, it does operate the flaps but usually it will go to full flaps or no flaps, same when using any of the other commands. The flap lever can be up and the flaps will go to full flaps, the odd time it might stop in between. I've made no other changes except this update. Have I missed something somewhere??Thanks,Mel M.

Hello,If it's the same sound I here, I think the tic/click sound may be the control soleniods operating when you move the yolk. I remember reading this somewhere.Mel

Brad,I have a Canon BJC_4100 and if you go into; Printing Preferences--> Paper/Quality-->Quality Settings....which will list: Best-Normal-Draft-Custom...,you may find it defaulting to Draft which gives a very light print. I know on mine any time I print anything, I always check these settings.Hope that helps.Mel.

Mel MelnykCYEG

Richard,And who say`s there`s no such thing as Santa.Now that`s a great gift.......made my day.Merry X-mas to everyone! Mel.