cubs

Disregard this post, I didn't select "pilots.setup". Installed now. Doug

I just tried installing Boing 314 version 1.2 and while it was unpacking, I got a NET Framework pop up saying that 4.8 or later update is already installed on this computer and that my installation will not occur. How do I get around this? Thanks Doug

Shortly after updating windows 10, P3Dv5 has been starting in a weird windows mode. The right side of my screen is visible approx. 2". The windows bar is visible at the bottom. When I "ALT ENTER", the right side of the screen fills in but P3D is still in windows mode until I "ALT ENTER" again, after the second time, I have full screen. I have to do this all of the time. Any ideas why this is happening? regards Doug Morlan

I fixed it. The throttle quadrant fell out of calibration. In order to calibrate it, I had to set the default setting, then calibrate from there. It's working fine now! Thanks for your help!! Doug

Thank you for the reply's. The funny thing here is that my Yoko yoke is working, my CH pedals are working but my CH throttle quadrant is only partly working. I can get only two axis working, the other four are dead. When I try to assign them in FSUIPC, I click scan while moving the lever but FSUIPC does not see it until the lever is at the full forward position. When I move the lever aft, there is no movement seen in FSUIPC, it just go's to zero. BTW after running the update, all of the control assignments repopulated in P3D! I had to go in and delete all of them again. regards Doug

I just did a windows 10 update a couple days ago and since then, FSUIPC6 is not working correctly. Some of the axis levers on my CH throttle quadrant do not calibrate or show any movement when moving the lever. I uninstalled FSUIPC6 and reinstalled and that did not help. I have had it for many years and have had no problem until I did the windows update. I am running P3Dv5.1 Thank you for any ideas! Doug Morlan

I have been having this problem for some time now. As I approach the clouds, They become imposed I guess that is what you would call it. They become separated by rings that are constantly moving as I fly through them. It looks horrible. I have played around with the monitor settings but I can't get rid of them. Thanks for any replies Doug M.

I just received my new computer from Jetline systems and I'm having a problem with the sound in the cockpit fading out when I move a switch. After a few seconds the sound will slowly come back. Has anyone experienced this? Thanks Doug Morlan

I just purchased the PMDG DC-6 for P3Dv4. After assigning all of the flight controls and engine controls through FSUIPC5, everything worked fine except the throttles. I have tried with the gust lock installed and removed. I even tried assigning through P3D controls instead of FSUIPC. I am using the CH throttle quadrant, yoke and pedals. Thank you for any help. Doug Morlan

I have VFXCentral installed and today I purchased chase plane. I used VFXCentral to install it and after the install, I clicked on the desktop icon to run it and I got this error: It looks like something unexpected occurred. A log file will be sent to FSFX Packages automatically. Sorry for the inconvenience. Any ideas to get this running? I have it installed in P3Dv4. thanks Doug

Let me try this again. Had FSX and P3Dv3 installed, windows 10. Removed FSX and P3Dv3 because of issues that I caused. Reinstalled P3Dv3 only. Ezdok camera will not work now. Tried migration tool also, no luck.

I haven't used FSX for a while and recently had issues with P3Dv3 because I kept tweaking it. After a clean install, and after running P3d, the first app was Ezdok. It installed ok and the config worked. When I launch P3d, Ezdok will not start. This has been going on for a while. I have the new version(1.18.7). I do notice that in all of my Ezdok folder locations, the exe file is missing the .xml. It should be "exe.xml" I even tried the migration tool. It seems to me something is corrupt, or I'm doing something wrong. thanks for any ideas Doug

I just did this approach with no problems. Before your initial fix (QWIKE) or (CLFFF), the aircraft needs to be at flaps 1 or more. This will keep the aircraft in VNAV PATH. As you approach LEETS, you should be at flaps 25 for a stable approach and do not set your missed approach alt until your below your FAF of 300 feet. hope this helps!

My apologies, I have updated my signature

Why is the DC-6 only offered for Xplane, I was hopeing to get it for FSX or P3D.

I have been with UAL for 31 years now as an aircraft inspector. Out of the entire fleet, I have enjoyed working on the 747. I have had the pleasure of performing inspections through out the aircraft from the nose to the tail, from wing tip to wing tip, inside and out. She is a work of art. Sadly, UAL is slowly phasing out the 747 which is being replaced by the 777 and the 787. I will surely miss them. Thanks to PMDG, I will soon have one of my own!! Doug Morlan

Hi, PMDG 777 FS2CREW runs perfectly when I use it. But after landing, while taxiing, or sometimes I make it to the gate, I get a CTD. Sometimes I even make it to eng shut down. It has been that way for a while. At least I get to do the whole flight. If I don't use it, I will not get a CTD. Any ideas what this may be? regards Doug Morlan

When the 747v2 is released, will it be available for P3D right away or will it only be available for FSX first. I would like to install P3D but I don't want to wait any longer for the 747. Thanks! Doug Morlan

Thanks for all of the advise! on my way to P3D!! Doug

I am thinking about removing FSX and installing P3D. My computer: Intel® Core I7-2700 CPU @ 3.50GHz RAM 8.00 GB 64-bit Operating System built from Jetline. Nvidea GeForce GTX 770. Windows 7. I have the PMDG 737 and 777. and I run some FTX sceneries. Thanks for any advise! Doug

For quite some time now, I have had issues with add on airport scenery elevation, buildings in the wrong area etc. I currently have fsdreamteam, Flightbeam, Imagine Simulation, FTX Oceana, Europe, and North America. I found out about scenery configuration editor, I installed it and found that I had numerous scenery errors. Approx 80%! The error was (scenery not found). Other than the scenery issues, FSX ran great. I did not get any scenery errors when loading FSX. Then I went into scenery config editor and I double clicked on each and every one of the error files and followed the path to where the file was located. It took me about two hours. Scenery config editor was now clear of all errors. I loaded FSX and as it started, It started to display scenery errors! It took me about five minutes to click through all of the errors! About all of the scenery files could not be found. WHAT HAPPENED! Will I have to do a complete reinstall of FSX? thanks for any info Doug

Hi Jim, I just downloaded scenery config editor because I have a lot of scenery issues, elevation problems, buildings in the wrong area etc. I have FTX Northern California, New Zealand, and Europe along with numerous add on airports. When I switched regions for the first time, that's when I started to have these issues. The scenery config editor shows approximately 80% of my scenery has errors! and the errors are "path can not be found". Can this be fixed or will I have to completely uninstall FSX and start over? Thank you for any info regards Doug

How do I fix the floating runway and taxi way for NZQN. They are about 20 ' in the air. Thanks Doug

Ok, thanks for the reply regards

Why would FS2Crew Airbus have really nice radio chatter through out the flight while FS2Crew for the PMDG 777 does not. Also the Airbus crew sounds more realistic while the 777 crew sounds robotic. It would be nice to have the background radio chatter for the 777. regards Doug