cubs

Let me try this again. Had FSX and P3Dv3 installed, windows 10. Removed FSX and P3Dv3 because of issues that I caused. Reinstalled P3Dv3 only. Ezdok camera will not work now. Tried migration tool also, no luck.

I haven't used FSX for a while and recently had issues with P3Dv3 because I kept tweaking it. After a clean install, and after running P3d, the first app was Ezdok. It installed ok and the config worked. When I launch P3d, Ezdok will not start. This has been going on for a while. I have the new version(1.18.7). I do notice that in all of my Ezdok folder locations, the exe file is missing the .xml. It should be "exe.xml" I even tried the migration tool. It seems to me something is corrupt, or I'm doing something wrong. thanks for any ideas Doug

I just did this approach with no problems. Before your initial fix (QWIKE) or (CLFFF), the aircraft needs to be at flaps 1 or more. This will keep the aircraft in VNAV PATH. As you approach LEETS, you should be at flaps 25 for a stable approach and do not set your missed approach alt until your below your FAF of 300 feet. hope this helps!

My apologies, I have updated my signature

Why is the DC-6 only offered for Xplane, I was hopeing to get it for FSX or P3D.

I have been with UAL for 31 years now as an aircraft inspector. Out of the entire fleet, I have enjoyed working on the 747. I have had the pleasure of performing inspections through out the aircraft from the nose to the tail, from wing tip to wing tip, inside and out. She is a work of art. Sadly, UAL is slowly phasing out the 747 which is being replaced by the 777 and the 787. I will surely miss them. Thanks to PMDG, I will soon have one of my own!! Doug Morlan

Hi, PMDG 777 FS2CREW runs perfectly when I use it. But after landing, while taxiing, or sometimes I make it to the gate, I get a CTD. Sometimes I even make it to eng shut down. It has been that way for a while. At least I get to do the whole flight. If I don't use it, I will not get a CTD. Any ideas what this may be? regards Doug Morlan

When the 747v2 is released, will it be available for P3D right away or will it only be available for FSX first. I would like to install P3D but I don't want to wait any longer for the 747. Thanks! Doug Morlan

Thanks for all of the advise! on my way to P3D!! Doug

I am thinking about removing FSX and installing P3D. My computer: Intel® Core I7-2700 CPU @ 3.50GHz RAM 8.00 GB 64-bit Operating System built from Jetline. Nvidea GeForce GTX 770. Windows 7. I have the PMDG 737 and 777. and I run some FTX sceneries. Thanks for any advise! Doug

For quite some time now, I have had issues with add on airport scenery elevation, buildings in the wrong area etc. I currently have fsdreamteam, Flightbeam, Imagine Simulation, FTX Oceana, Europe, and North America. I found out about scenery configuration editor, I installed it and found that I had numerous scenery errors. Approx 80%! The error was (scenery not found). Other than the scenery issues, FSX ran great. I did not get any scenery errors when loading FSX. Then I went into scenery config editor and I double clicked on each and every one of the error files and followed the path to where the file was located. It took me about two hours. Scenery config editor was now clear of all errors. I loaded FSX and as it started, It started to display scenery errors! It took me about five minutes to click through all of the errors! About all of the scenery files could not be found. WHAT HAPPENED! Will I have to do a complete reinstall of FSX? thanks for any info Doug

Hi Jim, I just downloaded scenery config editor because I have a lot of scenery issues, elevation problems, buildings in the wrong area etc. I have FTX Northern California, New Zealand, and Europe along with numerous add on airports. When I switched regions for the first time, that's when I started to have these issues. The scenery config editor shows approximately 80% of my scenery has errors! and the errors are "path can not be found". Can this be fixed or will I have to completely uninstall FSX and start over? Thank you for any info regards Doug

How do I fix the floating runway and taxi way for NZQN. They are about 20 ' in the air. Thanks Doug

Ok, thanks for the reply regards

Why would FS2Crew Airbus have really nice radio chatter through out the flight while FS2Crew for the PMDG 777 does not. Also the Airbus crew sounds more realistic while the 777 crew sounds robotic. It would be nice to have the background radio chatter for the 777. regards Doug

Fixed, the INI file was corrupt, working fine now.

After installing version 1.1 for the PMDG 777, I cant get anything to work. Before the update, everything was fine. I have reinstalled twice, restarting the computer each time. nothing on the main panel works. I do not use voice control. when I select PA or BR, the panel will show but when I click on a button, the panel disappears, no voice from captain or first officer. thanks for any ideas Doug

I have a question about FS2CREW and FS2CREW Captains set. When I click on FS2CREW, it gives me all of the information about this add on. When I click on the Captains set, it says nothing about what you get with this add on. I did purchase FS2CREW and it runs fine, but I am a little disappointed on how the voices sound robotic. The Aerosoft Airbus comes with FS2CREW and it sounds great! It also has radio chatter. So I guess I was expecting the same thing for the 777. Can anyone tell me more about the Captains set? Are the voices more realistic? does it come with radio chatter? This is my first time using FS2CREW (when I purchased the Areosoft Airbus) two weeks ago. regards Doug Morlan

Thanks for the reply, I was meaning SP1C, sorry. Event viewer: Application error, faulting application name: fsx.exe, version: 10,0,61637,0, faulting module name: PMDG_777X.DLL, version: 1,0,0,0, Faulting application path: C\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Gauges\PMDG_777.DLL Faulting module path: C\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe I just flew the 300ER from KDEN to KSFO, no problems at all. Using ASN and Simbrief. It seems to be fine now. The flights the I had issues with were from EHAM to EGLL and KSFO to PHKO. I will post another topic if this happens again. Thank you Doug Morlan

After installing SP1C for the PMDG 777, shortly after takeoff (flying the 777) FSX shuts down with a message saying that a program quit working and must shut down. It has happened twice now. Has anyone else had an issue with this? No problems before the SP1 install. regards Doug Morlan

Hi all, I have been having issues installing the 777 300ER update released on Aug 8th. So I went ahead and uninstalled the 777 300 ER, removed any remaining folders pertaining to the 300ER, restarted the computer, re downloaded the 777 300ER from PMDG. After re installing, I opened the operations center and there it was again. I checked the current version and it was the old version. It shows that I have an update "again" but It will not let me install it. When I click to install it, it reverts to the page that I have no notifications. I did successfully install the 777 200LR update but when I flew the airplane, shortly after takeoff, the computer crashed displaying that a program quit working. Before this update, I had no problems at all with the airplane. Thanks for any ideas regards Doug

Hi all, I have been having issues installing the 777 300ER update released on Aug 8th. So I went ahead and uninstalled the 777 300 ER, removed any remaining folders pertaining to the 300ER, restarted the computer, re downloaded the 777 300ER from PMDG. After re installing, I opened the operations center and there it was again. I checked the current version and it was the old version. It shows that I have an update "again" but It will not let me install it. When I click to install it, it reverts to the page that I have no notifications. I did successfully install the 777 200LR update but when I flew the airplane, shortly after takeoff, the computer crashed displaying that a program quit working. Before this update, I had no problems at all with the airplane. Thanks for any ideas regards Doug

Hi all, I have been having issues installing the 777 300ER update released on Aug 8th. So I went ahead and uninstalled the 777 300 ER, removed any remaining folders pertaining to the 300ER, restarted the computer, re downloaded the 777 300ER from PMDG. After re installing, I opened the operations center and there it was again. I checked the current version and it was the old version. It shows that I have an update "again" but It will not let me install it. When I click to install it, it reverts to the page that I have no notifications. I did successfully install the 777 200LR update but when I flew the airplane, shortly after takeoff, the computer crashed displaying that a program quit working. Before this update, I had no problems at all with the airplane. Thanks for any ideas regards Doug

Hi all, I have been having issues installing the 777 300ER update released on Aug 8th. So I went ahead and uninstalled the 777 300 ER, removed any remaining folders pertaining to the 300ER, restarted the computer, re downloaded the 777 300ER from PMDG. After re installing, I opened the operations center and there it was again. I checked the current version and it was the old version. It shows that I have an update "again" but It will not let me install it. When I click to install it, it reverts to the page that I have no notifications. I did successfully install the 777 200LR update but when I flew the airplane, shortly after takeoff, the computer crashed displaying that a program quit working. Before this update, I had no problems at all with the airplane. Thanks for any ideas regards Doug

Hi all, I have been having issues installing the 777 300ER update released on Aug 8th. So I went ahead and uninstalled the 777 300 ER, removed any remaining folders pertaining to the 300ER, restarted the computer, re downloaded the 777 300ER from PMDG. After re installing, I opened the operations center and there it was again. I checked the current version and it was the old version. It shows that I have an update "again" but It will not let me install it. When I click to install it, it reverts to the page that I have no notifications. I did successfully install the 777 200LR update but when I flew the airplane, shortly after takeoff, the computer crashed displaying that a program quit working. Before this update, I had no problems at all with the airplane. Thanks for any ideas regards Doug