Binford

Hi Ray, i also asked in the AIG Forum but i thought somebody here maybe experienced the same issue and found a solution ;-) Greetings Michael

Hello Everybody, first of all i'am sorry if my question has already been answered. My Problem is that the Traffic Limiter in AI Companion is not working with TC injected Traffic. AI Traffic is immediately re-spawned in the Sim. For example, i have TC startet and let's say a total of 75 Aircraft's. Then i start AI Companion with a setting of maximum 50 Aircraft's to keep. Initially it it is going down to 50 but after some Seconds AI traffic reappears until AIC is deleting it again. I'am in a Loop. For the "standard BGL based" AI everything is working fine. I have the newest Versions of everything and all on the same PC. What i'am doing wrong? Greetings Michael

Hello Bryan, sorry to come back to that again. Even after a Windows Reinstall and a full retrain of my voice Profile FS2Crew (777 in this case) keeps to understand "APU Off" multiple times even when there is no background noise and i'am not saying anything. A small throat seems to be enough to let FS2Crew think that i have said "APU Off". On other Version like FSLabs it's just keeps saying "Check" every now and then but on the 777 Version the switch off of the APU ist very annoying 😉 I'am now out of ideas to get rid of it. Do you have any further advice or workaround for me maybe? Greetings Michael

I was on an older on (approx 2 month old) when i encountered this problem. As part of my trouble shooting i installed the second last one as i already read about problems with the newest one. So this could not be the problem... But thanks anyway. Greetings Michael

Hello Everybody, i encountered a very strange behavior recently. I don't know if there is an correlation between all this things. During my last flights i noticed that ground textures becoming blurry during the flight. I tried to do a scenery reload via a FSUIPC Key command which normally works fine but in this case leads my P3D to crash to desktop. I did some trouble shooting to figure out whats wrong and during this i noticed that when i change my Mesh Resolution i got a CTD almost immediately after hitting Ok (loading screen appears at 0% and thereafter P3D crashed within seconds) I rebuild my Prepar3D.cfg to default with all settings at default and tried to change the Mesh Resolution which works just fine. So i did all my Settings again and thereafter i got again CTDs while changing Mesh Resolution. I traced everything back to the Autogen and Scenery Draw Distance Value to the Setting which causes the CTD. When i set this to anything higher than "Medium" my P3D crashes when i tried to change Mesh Resolution. With "Medium" everything works fine. I have no Idea whats going on here ... Maybe anybody? Greetings Michael

Hello All, is anybody here using Riva Tuner Statistic Server to limit the fps externally? I do so but recently it is randomly not working anymore. I changed nothing on my setup. RTSS is starting together with Windows and yesterday it was working just fine limiting my fps but today it is doing nothing despite i haven't changed anything. I tried reinstalling RTSS but without help. Sometime it's working, sometimes not. Is there anybody maybe having the same issue or even better an solution for that? Greetings Michael

Good Morning to all, is there any way to have the voice recognition more accuracy? Does it makes sense to run the Windows Voice Recognition Setup again when FS2Crews is having a hard time to understand? My particular problem is, that FS2Crew sometime needs 4 or 5 attempts to understand what i say. Also even if i just clear my throat FS2Crew responds with "checked". That is very annoying. In the PMDG 777 i no have the big problem, that my FO turns off the APU frequently because he/she reacts to some noises i do. Very annoying when you just switched off the GPU 😉 Greetings Michael

Hi Guys, thanks for your help. As i tried every possible Setting without any change i was already in the doubt that this is normal behavior of P3D. But i will try the P3D.cfg Settings to see if it makes any difference. Thanks for the Heads up. Greetings Michael

Hello All, i'am fighting against black textures from Add-On Sceneries in the Sim for quite a while. I tried many different settings without help. Buildings are loading very late and slow. See flyTampa YSSY as an example : Everything fine : Zooming out a little bit more. Textures turning black. Zooming In again and everything looks fine. Has anybody an idea on how to solve this? Greetings Michael

Any news on this issue? I'am scared every time the F/O is pushing the T/O Button with the Flaps not set 😉 Greetings Michael

Hi Bryan, thanks for the heads up regarding the external ac cart. That could be the point. Will try it next time. Thx and Happy new Year, Michael

Good Morning, is there any reason why the f/o is switching of the Packs during its Preflight Flow? It's quite annoying when you are on a freezing cold airport and wondering why the aircraft not geting warm 😉 Greetings Michael

Hello @ All, so you can move the files to another drive but is there any chance to do a backup of those files in case you need to reinstall Windows or changing Hardware or whatever? Or do i need to Download the 100+GB again in this case? Would be nice to have a option for an offline Installation as soon as you have Downloaded all required files. Greetings Michael

Would be a nice addition to the addon also it takes not much afford to do it by myself 👍

Hello Everybody, when i manually overriding the pitch trim setting from the PM during the before taxi flow it is always trimming back to that initial setting automatically until a certain point within the taxi flow. As the trim setting from the PM is not always matching the trim setting from the performance calculation this behavior could be a little bit irritating. Could you advise until which point the PM has "Authority" over the pitch trim setting? Greetings Michael

Hello, first of all thanks for implementing this feature but there is still some fine tuning to do ;) The PM seems to push the TO Config Button within the Taxi Flow which leads to an Red Master Warning because the Flaps are not in Take-Off Position. Don't know if that is easy to fix but maybe you can have a look into this for the next builds. Thanks and Greetings Michael

Sounds great. Thank you 🙂

Merry X-Mas to everybody, could somebody please advise which Approach Type in the APP Briefing i have to select to perform an RNAV/RNP Approach? Thx and Greetings Michael

Hello Everybody and merry X-Mas. May i ask if there are there any news on my issue/question? Greetings Michael

I don't want to open a new thread so i think my question will fit in also here. Which Option in the APR Briefing "Approach Type" do i have to select for an RNAV Aprooach? Greetings Michael

Hello everybody, i didn't find any option for (Remote) De-Icing. Do i miss something or is it just not simulated? I'am looking for an option to leave the Flaps Up for taxi in the After Start Flow and to do the Flight Controls check after De-Icing is completed. Greetings Michael

I did two flights recently on EZY and both time # 1 was started first thereafter # 2 without single engine taxi. Greetings Michael

I was wondering too but they do. Greetings Michael

Hello All, as far as i know and observed on my recent flights, Easyjet is starting the #1 Engine first and then the # 2 Engine. Also they retract the landing light after Flaps Up due to passenger comfort (no vibration and less noise in the cabin). Here are my questions regarding this. - Does it matte which engine is started first during the Eng Start Challenge? Manual says # 2 and then # 1. Does it make any difference if i start # 1 first? - Maybe you could do an option to retract LDG Lights with flaps up? I'am expecting that when i retract them by my self the f/o will then extend them at 10.000ft again? Greetings Michael

As far as i remember boarding sounds are provided by FSL and not FS2Crew. To hear them you have to commence boarding via the ATSU and then pull (activate) the reception knob on the ACP. Greetings Michael