jerzem

Hi all, thanks for this thread. I had the same problem in HD shadow with the new fixer 2.5. The shadow moved with camera angel in conjunction with ezdoc cam. Well I went back the "Shadow Version 6" to "5" and now the HD shadow is working fine. Many thanks to Steve too for this wonderfull tool. Have a nice day. Oli

From where I can download this V 1.00802b? In SimMarket is I found only the V1.00802.

Hi everyone, this time i´m writing a new script for callout the V-Speed. For the testphase I write it with TEXT, later I will replaced it with a wave file. The line for callout 80 knots works great (standalone for test): 0 BEGIN 2 GOTO 2 #airData_->ADC[0].outputs.IAS < 80 0 GOTO 0 TEXT "80 knots" 0 END But when I make the callout for V1 (standalone for test): 0 BEGIN 2 GOTO 2 #airData_->ADC[0].outputs.IAS < #EFISdata_->bugs.debug_IAS_L_V1_bug 0 GOTO 0 TEXT "V1" 0 END the script write the V1 message when the Dash is still standing. The V1 bug is set to over 100. I do not understand what I'm doing wrong. Can anyone help me? Thanks Best regards Oli

Hi Bernhard, i´m sorry, but I did solve this problem until now. Have you a solution? Oliver

Hi, in the "A/T Manual Override" the option "In hold/Arm Mode only" is selected. Is the same as 700/800 and 900. And their are without problems. Now i´ve make a new test flight and i´ve maked pictures. At the first you can see with A/T is on. My hardware throttle position ist on idle and should be below 40 % N1 on 737-600, but the thrust is over 60 %. And the second you can see with A/T is off and the hardware throttle position is on idle. And once more: Only with the 600 model and only at the second flight. All the other models has not one problem.

Thx for your answere, you are right. The throttles don´t go to ground idle during a decel. I meen the idle on air. I fly in FL 160 and normaly when I reach the top of descent the throttles go to idle, ca. 40 % N1. But with the 600 Model the throttle go to 60-70 % N1 and the speed run to over 300 knt indicated airspeed after entry the descent path. The registered airspeed is 279 knt. I think this sounds like a VNAV issue, too. But I don´t know what, because... ..every time at the first leg all looks good and I never have a problem. And only and every time the problems comes at the second leg and only by/respectively reaching top of descent, and only with the 600 model. With 700/800/900 all time all is ok. With their i can fly 5 legs without new loading, and without any problems. And what about the throttle control when I turn off auto-thrust? The engines are running high for maximum power N1. No manual input is accepted. Only with 600 and only after t/d and only and every time at the second leg. Otherwise there is a problem before. greetings Oli

Hi everyone, i have a Problem with Throttle and Thrust with the 600 Model. When i´m fly a second leg and die 737-600 is reach the top of descent, the thrust don´t go to idle. He go down to 60-70 % N1 but not to idle. So the Boing cannot reduce the speed. When I turn off the auto-thrust the throttle to forward and the thrust is going to full thrust (max N1) and the speed goes in the red area. I can do what i want, there is no reaction. Not with the hardware throttle, not with F1 and when I use the mouse to give the throttle to idle, the throttle just turn back to maximum power. When I turn on the the auto-thrust, N1 goes to 60-70 %. And as well no reaction with hardware or or or. A landing is impossible. Please notice: This problem ist only with the 737-600, and only and every time at the second leg without new loading the aircraft on airport B (from A to B and as second leg from B to A), and only after top of descend ist reached. Befor all is ok with throttle and thrust. All the others 700/800/900 works perfect. Can someone tell me, what this is and have a solution for me? Many thanks for your help. greetings Oli

@Daveo klick the link of Ivota under "I found". There, everything is explained. This is apparently no official update. But the build is B4622.

Hi, i have the same problem since 1 Hour. Popup "Need Activation" then "Online Atcivation Success" and so on.... and so on... and so on... Thanks for the Link. Now it works after install the new update B4622