flybyme

please help me... I have seen your post telling you solved issues and fly FSX with 3 monitors....I have issues with my FSX. I get "out of memory" and FSX freezes... Please help... I have: W7 Ultimate 64bit Intel Core i5-3570K CPU 3.40Ghz overcloked at 4.2Ghz, Memoria Ram 8 GB GPU AMD 7900 with 3 GB memory 3 monitors Samsung SyncMaster 214T resolution 4800x 1192. I use Radeon Pro Tool 1.1.1.0 for the GPU Settings... I fly PMDG 737NGX in virtual cockpit + various add on

Thanks Ted, the idea is to maintain 3 monitors sonce I use TrackIr..and like the wide view of hte 4800x1200... I will try to switch the cables of the monitors...and see what will happen..

Any sugestions ??Please

Hello to everyone, I use 3 monitors monitors "samsung SyncMaster 214T 21" " with the VGA AMD RADEON 7970 and resolution 4800x1200 while the GPU is a Intel i5 3570K OC at 4,20Ghz.. I get fsx a bit slow on certain scenaries and flying situations but effort it.. At a certain point I got one monitor that does not stay "Lit"...so now it gives me a "black" screen.....I gues the internal video card or similar has broken... The point is....should I buy a used same monitor (altough these are "old" monitors) or change all 3 with new ones??? If I change all 3 with new monitors, will I have emprovement on frame rates in FSX?? If I choose to change the 3 monitors....wich model can u suggest me? Thanx

ciao DAve, u've got private mail ;o)

any suggestions?pleaseeeeeeeeeeee

Hello to all, I have some issues with FSX windowed mode using EnfinityEye ( I get all the virtual 2D cockpit on 3 monitors)... What happens is that while I fly FSX with TrackIr (more or less with 20/25 frame rates..) I get the monitors image freezed while the sim still works in the background... So, If I reduce the FSX window from 3 monitors to 2 or less, the images get operating and all goes fine... I guess it has to do with my SVGA...it does not refresh fastly the monitor image..and I get the freezing.. Is this correct? So what about an up grade to the new R9 209X?Could it help?? Thanks a lot.. My sistem is: -CPU INTEL i5-3570K 3,4 GHZ 77W OC to 4,3 GHZ -Noctua NH-U12P SE2 FAn for CPU -SVGA ATI XFX HD7970 3GB Dual Fan FX-797A-TDFC -OCZ VERTEX 4 256GB -CORSAIR 750W MODULAREHX750 CMPSU-750HXEU -DDR3 PC1600 8GB Vengeance White LP [2x4GB][CML8GX 3M2A1600C9W] -MB Asus P8Z77-V LK (ATX) DDR3 USB3.0 90-MIBIH0-G0EAY0VZ -3 Samsung SyncMaster 214T with resolution 1600 x 1200 each.

in the "aircraft.cfg" I have: [EFFECTS] wake=fx_wake water=fx_spray dirt=fx_tchdrt concrete=fx_sparks touchdown=fx_tchdwn, 1 do I have to change anything on the "touchdown line"???

Hello, I 've got a couple of issues...I apreciate any help... WHile using 737 Ifly I do not see: -tire smoke when landing... -engines (front part pannel) going aft when on reverse... Any suggestion? in the "EFFECTS" foulder of FS9 I have : -fx_tchdwn.fx -fx_tchdwn_s.fx thanx

Found the "trik" and it had reversed it ;o) Thanx endeed... But the movement is not smooth in FS9...if I move slowly the spoiler lever of the Saitek...on fs9 the lever goes in mid range and moves up and down like crazy... How do I set it to get "arm spilers" in a small range...and then "increase spoiler " when the lever goes down and "decrease spoilers" when the lever goes up?

Thanx for the help... If u edit the fs9.cfg you may delete all the "joystik assignements" and then re assign them via FSUIPC... It worked with the "throttle levers"... I'm having troubles with the "spoiler lever":.. In reality the lever is "UP"....and when you move it down in arms the spoilers and then increase the spoilers effect.... If I understood the FSUIPC instructions...I should assign it as per immages attached: but on FS I get that the lever UP only if the lever on the SAITEK is DOWN...Is there a way to reverse it??? http://imageshack.us/photo/my-images/15/spoilersincrease.jpg/ http://imageshack.us/photo/my-images/72/spoilerdecrease.jpg/ and again: On Ifly is there a keyboard button fot TO/GA and ENGINE CUT OFF/STARTER or It's usable only with the mouse since I need to assign them to the joy??

Ciao to all, I just got the Saitek Throttle and I would like to use it with the Ifly in fs9.. I did not understand how to asign the commands . I've also got registered FSUIPC... I've tried to use also SST but with no results...it seems the "throttle" has allready pre-assigned buttons (for instance "change of view" etc...) I wish to have: first left lever = air/grouns spoiler (as real) -upper button (beneath the spoiler lever) T1= TO/GA -lower button T2= autopilot off second lever= engine 1 thrust lever(as real) -upper button (beneath the engine 1 TL) T3= engine 1 cut off/starter (as real) -lower button T4 = don't know yet third lever = engine 1 thrust lever(as real) -upper button (beneath the engine 2 TL) T5= engine 2 cut off/starter (as real) -lower button T6 =don't know yet On Ifly is there a keyboard button fot TO/GA and ENGINE CUT OFF/STARTER or It's usable only with the mouse?? Please help... Thanx

I found out that If i disable in Active Camera 2004 the "Internal pilot view"...I get no flickering anymore... But now I loose all the "acive camera effects" as "turbolence", "landing/taking off" movements of the V cockpit... Any suggestions????

Hello, I have the MS Sidewinder FF2 in FS9... Anyone has the settings for IFly 737?

Hello, hope u can help me... I use 3 monitors with Eye infinity and a hd7970 XFX with resolution 5040x1200. When I activate Trackir5 in VC I get FS flickering... (frame rates are bloked to 30) If I put TrackIr in "pause", no flickering anymore... What could it be? Help please.... :huh: