flybyme

please help me... I have seen your post telling you solved issues and fly FSX with 3 monitors....I have issues with my FSX. I get "out of memory" and FSX freezes... Please help... I have: W7 Ultimate 64bit Intel Core i5-3570K CPU 3.40Ghz overcloked at 4.2Ghz, Memoria Ram 8 GB GPU AMD 7900 with 3 GB memory 3 monitors Samsung SyncMaster 214T resolution 4800x 1192. I use Radeon Pro Tool 1.1.1.0 for the GPU Settings... I fly PMDG 737NGX in virtual cockpit + various add on

Thanks Ted, the idea is to maintain 3 monitors sonce I use TrackIr..and like the wide view of hte 4800x1200... I will try to switch the cables of the monitors...and see what will happen..

Any sugestions ??Please

Hello to everyone, I use 3 monitors monitors "samsung SyncMaster 214T 21" " with the VGA AMD RADEON 7970 and resolution 4800x1200 while the GPU is a Intel i5 3570K OC at 4,20Ghz.. I get fsx a bit slow on certain scenaries and flying situations but effort it.. At a certain point I got one monitor that does not stay "Lit"...so now it gives me a "black" screen.....I gues the internal video card or similar has broken... The point is....should I buy a used same monitor (altough these are "old" monitors) or change all 3 with new ones??? If I change all 3 with new monitors, will I have emprovement on frame rates in FSX?? If I choose to change the 3 monitors....wich model can u suggest me? Thanx

ciao DAve, u've got private mail ;o)

any suggestions?pleaseeeeeeeeeeee

Hello to all, I have some issues with FSX windowed mode using EnfinityEye ( I get all the virtual 2D cockpit on 3 monitors)... What happens is that while I fly FSX with TrackIr (more or less with 20/25 frame rates..) I get the monitors image freezed while the sim still works in the background... So, If I reduce the FSX window from 3 monitors to 2 or less, the images get operating and all goes fine... I guess it has to do with my SVGA...it does not refresh fastly the monitor image..and I get the freezing.. Is this correct? So what about an up grade to the new R9 209X?Could it help?? Thanks a lot.. My sistem is: -CPU INTEL i5-3570K 3,4 GHZ 77W OC to 4,3 GHZ -Noctua NH-U12P SE2 FAn for CPU -SVGA ATI XFX HD7970 3GB Dual Fan FX-797A-TDFC -OCZ VERTEX 4 256GB -CORSAIR 750W MODULAREHX750 CMPSU-750HXEU -DDR3 PC1600 8GB Vengeance White LP [2x4GB][CML8GX 3M2A1600C9W] -MB Asus P8Z77-V LK (ATX) DDR3 USB3.0 90-MIBIH0-G0EAY0VZ -3 Samsung SyncMaster 214T with resolution 1600 x 1200 each.

in the "aircraft.cfg" I have: [EFFECTS] wake=fx_wake water=fx_spray dirt=fx_tchdrt concrete=fx_sparks touchdown=fx_tchdwn, 1 do I have to change anything on the "touchdown line"???

Hello, I 've got a couple of issues...I apreciate any help... WHile using 737 Ifly I do not see: -tire smoke when landing... -engines (front part pannel) going aft when on reverse... Any suggestion? in the "EFFECTS" foulder of FS9 I have : -fx_tchdwn.fx -fx_tchdwn_s.fx thanx

Found the "trik" and it had reversed it ;o) Thanx endeed... But the movement is not smooth in FS9...if I move slowly the spoiler lever of the Saitek...on fs9 the lever goes in mid range and moves up and down like crazy... How do I set it to get "arm spilers" in a small range...and then "increase spoiler " when the lever goes down and "decrease spoilers" when the lever goes up?

Thanx for the help... If u edit the fs9.cfg you may delete all the "joystik assignements" and then re assign them via FSUIPC... It worked with the "throttle levers"... I'm having troubles with the "spoiler lever":.. In reality the lever is "UP"....and when you move it down in arms the spoilers and then increase the spoilers effect.... If I understood the FSUIPC instructions...I should assign it as per immages attached: but on FS I get that the lever UP only if the lever on the SAITEK is DOWN...Is there a way to reverse it??? http://imageshack.us/photo/my-images/15/spoilersincrease.jpg/ http://imageshack.us/photo/my-images/72/spoilerdecrease.jpg/ and again: On Ifly is there a keyboard button fot TO/GA and ENGINE CUT OFF/STARTER or It's usable only with the mouse since I need to assign them to the joy??

Ciao to all, I just got the Saitek Throttle and I would like to use it with the Ifly in fs9.. I did not understand how to asign the commands . I've also got registered FSUIPC... I've tried to use also SST but with no results...it seems the "throttle" has allready pre-assigned buttons (for instance "change of view" etc...) I wish to have: first left lever = air/grouns spoiler (as real) -upper button (beneath the spoiler lever) T1= TO/GA -lower button T2= autopilot off second lever= engine 1 thrust lever(as real) -upper button (beneath the engine 1 TL) T3= engine 1 cut off/starter (as real) -lower button T4 = don't know yet third lever = engine 1 thrust lever(as real) -upper button (beneath the engine 2 TL) T5= engine 2 cut off/starter (as real) -lower button T6 =don't know yet On Ifly is there a keyboard button fot TO/GA and ENGINE CUT OFF/STARTER or It's usable only with the mouse?? Please help... Thanx

I found out that If i disable in Active Camera 2004 the "Internal pilot view"...I get no flickering anymore... But now I loose all the "acive camera effects" as "turbolence", "landing/taking off" movements of the V cockpit... Any suggestions????

Hello, I have the MS Sidewinder FF2 in FS9... Anyone has the settings for IFly 737?

Hello, hope u can help me... I use 3 monitors with Eye infinity and a hd7970 XFX with resolution 5040x1200. When I activate Trackir5 in VC I get FS flickering... (frame rates are bloked to 30) If I put TrackIr in "pause", no flickering anymore... What could it be? Help please.... :huh:

what about this: On the CCC control panel, I have the following: Anti-Aliasing: Override application settings Level: 8X Samples: 24X Filter: Edge-detect Anisotropic Filtering: Override application settings Per-pixel samples: 16X (In FS I have set trilinear) Morphological Filtering: Disabled (This makes everything blurry if I use it) Tesselation: AMD optimized (guess this has no effect in FS) Texture Filtering Quality: High Quality Surface Format Optimization: Enabled (guess this has no effect in FS) Wait for Vertical Refresh: Always on Anti-Aliasing Mode: Adaptive Multi-sample AA OpenGL Settings: Triple Buffering: Enabled

Hello, so wich are the best settings to use in CCC with this VGA? ;o) I use fs9....

Ok, I' lo look for then on the internet.....but if u have the link... May I also ask you wich settings did u use? As asonotropic...etc....

Hello, Thanx for the reply ,It's what I did....but I get on FS9 Window , seVeral "blue Lines" .....like scratches.... If I Put all to minimum I get no "scratches" but the pixels are not "rounded"...... I think it has to do with the settings of CCC..... By the Way, when I connect the 2nd monitor to the 2nd DVI output...I get errore with the VGA deriverà and then the "blue screen" before the pc auto reboots... HOPE the problem si given by the drivers.....wich version of drivers do you have?

Ciao to all, I just got my new pc and video card si a HD 7900 3gb.... Which are e settings to use for Fs in the CCC? Refered to the Antialliance, anisotropic filters......etc.... Thanx a lot

ok, as soon as possible I'll try it...thanx... B)

Hello, I've just installed FS9. I've also installed FSGlobal2010,REX, UTE, GPE, ASE... I would like to fly on line IAVO with real weather.. I undestood the best way is to use ASE with REX textures... Wich settings should I use for this purpose? Wich is the right way to start a flight.....??????????????? I've been told (from a NON IVAO flyer) I should: Step 1. Start REX2004. Click the Weather tab. Click the side red VIEW WEATHER tab to instantly see current weather cloud conditions around the globe, viewable by country. Decide where you will be flying. Step 1a. If you are just flying locally (within a 120 mile radius), enter the airport code where you will be flying. REX2004 will load the latest METAR data onscreen. Click the lower green WX TEXTURES button to install the textures directly into your FS9 folder. Once it finishes, close the REX2004 completely. Do not leave it running. Step 1b. Alternately, if you are going to create/use a flight plan, then click the lower red FLIGHT PLAN button. REX2004 offers a lot of flight plan options at this point. You can load other flt plans from REX, FS9 or other sources, ...or just create a new one from scratch entering the information in the windows provided. You will need to answer each window if creating using the REX interface on this page. (under the alternate airport, you can cheat by entering the destination airport again) At this point REX will display your flight plan. Click the lower green WX TEXTURES button to install the selected textures into your FS9 folder. Once it finishes, close the REX2004 completely. Do not leave it running. ******************** Step 2. Start the ASE software. Be sure under the OPTIONS tab that Automatic Updates is selected. You may also be able to use the VATSIM Online Weather with the IVAO network... not sure. Step 2a. Click the BRIEFING tab. Click the side pink CHANGE FLIGHTPLAN button. Click the purple IMPORT button. Locate your desired flight plan and load it. Click the PROCESS button. Click Cancel when ask if you want to install a Graphics Snapshot for your route. ASE will load the current weather report for your selected flight plan. ************************ Step 3. IMPORTANT OPTION: If you desire to install the beautiful Ground-Environment Pro textures for your flight, then click the bright green Install GE Pro Textures button on the right side. This will inject custom ground textures from your GEP to correctly match the weather conditions in FS9 using your selected REX textures and ASE weather data. You will next be presented with the following questions from the GEP interface which by now is open and running... Question: Do you want to install GEP textures obtained from ActiveSky? Answer: Select YES. GEP will install ground textures to perfectly match your ASE/REX weather. Question: Do you want GEP to start FS2004 now? Answer: NOOOOO!!!! Do not start FS9 from within GEP!!! Your FS9 sky and ground environment is now correctly configured for the best realism effect. ******************** Step 4. Start FS9 from within the ASE interface using the blue Start FS button located on the top right side. VERY IMPORTANT>>> DO NOT CLOSE ASE. Minimize the software using the minimize option (top right) emblem with downward arrow only. IS this the way??? <_< Thanx

Ciao, hope this is the right place where I can post my request... I have the tripplehead2go digital edition and I would like to use it on my 3 monitors... My question is.. when I open FS on the main monitor....how do I get the full immage on the 3 screens: 1) enlarge the FS window on clicking on the "square" on the high right corner of the window (nearby the "X" to close it..). or 2)with the mouse stretch the FS window untill it fills the right and left monitors? Hope I made myself understand... Thanx :huh:

Ciao to all, I've just bought a new pc...the video card is a XFX Radeon HD 7970 3GB...the drivers are: Advanced Micro Devices, Inc. 08/03/2012 8.951.0.0 Wneh I connect the second monitor out of the 2nd DVI output of the video card...It happens some times that I get wierd stripes on the screens, than the immages freezes than a w7 msg telling that the drivers have been "resetted"...and later a blue screen.... I added the error that w7 gives me after the blue screen....please help and suggestions... Thanx----