300leex

Hi Pero, Thank you for the response. The problem do not occur when Simstarter is not being use, I compare the active scenery and they appear to be the same so really have no idea what casuse the problem. However I download the latest version Simstart, redo all the setup and the problem is gone. All is fine now. Thank you!

Hi, First of all, thank you very much for all your effort on SimStarter, it's always been my favorite utility for FSX. However, I got strange waterclass/ texture only when FSX start via SimStarter, so I'm guessing it could be part of the configuration is being ignored or not being write correctly, however not sure which and where to make the correction. Can you please give me some advise of what I should check for solution please. Addons: REX 4 texture direct FTX Global Vector FS Global 2010 FTX Thank you!

Hi Anthony, I live in China long enough to understand the difficulties. But As one of your customer, I would like to suggest you look for possible fix before dig into accuracy that you might not have access. If you can change the nav data to fit your airport than I would definitely prefer it than the 300m difference, I might sound silly as I do not know much of scenery development but you are a developer , many people spent money on your product so consider the reputation regardless how much it means to you. So please stop banging you head against the wall for things you can't change and find some alternative solution. I know people would still complain about accuracy but it would be far better than leave it as it is to my opinion. Besides that, it is truly a piece of amazing work you have pulled out! Regards, Lee

Thanks Ron! I'll contact JD via email.

Hi JD, Thank you for your reply, I just pm you, please check your message. Thanks!

Thanks Ron Hope there's a fix for this.

Hi ronize, Thanks again! The error I got when loading .pln should be Invalid procedure call. I tried your flight plan and it works, unfortunately I do not own FSBuild, tried to laod exported flight plan from PFPX but came up with the same error. Below debug log from laoding ,pln created by FSX planner,I'm not sure how to read it so would you take a look for me please. Thank you! debug on RC Version 4.3.3845 June 6, 2006 C:\Program Files (x86)\rcv4x\rcv4.exe <fs2kplanner> C:\Users\LEE\Documents\Flight Simulator X Files\IFR San Francisco Intl to Los Angeles Intl.PLN ================================================================================================================================================================================= 嚜??xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AceXML" version="1,0"> <Descr>AceXML Document</Descr> <FlightPlan.FlightPlan> <Title>KSFO to KLAX</Title> <FPType>IFR</FPType> <RouteType>HighAlt</RouteType> <CruisingAlt>32000</CruisingAlt> <DepartureID>KSFO</DepartureID> <DepartureLLA>N37* 37' 0.37",W122* 22' 55.52",+000013.00</DepartureLLA>

Hi, Thanks for the assistance! I've been advise by another member of this fourm to change unicode setting which elimanated the problem in Customize Voices menu however causing error to other program in my computer, so I'm wondering if there's other solution please. Problem to load .pln do not resolve by change the unicode setting. I just rebuild RC data base again and create a plan using default airports but came up with the same error. extract of the .pln as below. Thanks for the help again amd really looking forward to get this great program to run. <?xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AceXML" version="1,0"> <Descr>AceXML Document</Descr> <FlightPlan.FlightPlan> <Title>KSFO to KLAX</Title> <FPType>IFR</FPType> <RouteType>HighAlt</RouteType> <CruisingAlt>32000</CruisingAlt> <DepartureID>KSFO</DepartureID> <DepartureLLA>N37* 37' 0.37",W122* 22' 55.52",+000013.00</DepartureLLA> <DestinationID>KLAX</DestinationID> <DestinationLLA>N33* 56' 9.47",W118* 25' 7.69",+000126.00</DestinationLLA> <Descr>KSFO, KLAX</Descr> <DeparturePosition>GATE D 2</DeparturePosition> <DepartureName>San Francisco Intl</DepartureName> <DestinationName>Los Angeles Intl</DestinationName> <AppVersion> <AppVersionMajor>10</AppVersionMajor> <AppVersionBuild>61637</AppVersionBuild> </AppVersion> <ATCWaypoint id="KSFO"> <ATCWaypointType>Airport</ATCWaypointType> <WorldPosition>N37* 37' 0.37",W122* 22' 55.52",+000013.00</WorldPosition> <ICAO> <ICAOIdent>KSFO</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="OAK"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N37* 43' 33.30",W122* 13' 24.92",+000000.00</WorldPosition> <ICAO> <ICAORegion>K2</ICAORegion> <ICAOIdent>OAK</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="AVE"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N35* 38' 49.11",W119* 58' 42.98",+000000.00</WorldPosition> <ATCAirway>J1</ATCAirway> <ICAO> <ICAORegion>K2</ICAORegion> <ICAOIdent>AVE</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="DERBB"> <ATCWaypointType>Intersection</ATCWaypointType> <WorldPosition>N35* 15' 21.25",W119* 38' 29.21",+000000.00</WorldPosition> <ATCAirway>J1</ATCAirway> <ICAO> <ICAORegion>K2</ICAORegion> <ICAOIdent>DERBB</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="REYES"> <ATCWaypointType>Intersection</ATCWaypointType> <WorldPosition>N34* 39' 31.43",W119* 8' 3.56",+000000.00</WorldPosition> <ATCAirway>J7</ATCAirway> <ICAO> <ICAORegion>K2</ICAORegion> <ICAOIdent>REYES</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="FIM"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N34* 21' 24.11",W118* 52' 52.65",+000000.00</WorldPosition> <ATCAirway>J7</ATCAirway> <ICAO> <ICAORegion>K2</ICAORegion> <ICAOIdent>FIM</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="LAX"> <ATCWaypointType>VOR</ATCWaypointType> <WorldPosition>N33* 55' 59.31",W118* 25' 55.22",+000000.00</WorldPosition> <ATCAirway>J7</ATCAirway> <ICAO> <ICAORegion>K2</ICAORegion> <ICAOIdent>LAX</ICAOIdent> </ICAO> </ATCWaypoint> <ATCWaypoint id="KLAX"> <ATCWaypointType>Airport</ATCWaypointType> <WorldPosition>N33* 56' 9.47",W118* 25' 7.69",+000126.00</WorldPosition> <ICAO> <ICAOIdent>KLAX</ICAOIdent> </ICAO> </ATCWaypoint> </FlightPlan.FlightPlan> </SimBase.Document>

Hi, I just purchased and installed RC4 but having trouble to get it run correctly. The problem seems a bit unusual and would need some helps here please. issue 1 There's always run time error 5 after loading my flight plan. The flight plan was created within FSX planner and RC database have been rebuild for a several times. issue 2 Run time error 6 when I press to hear the voice under Customize Voices menu. My OS is Win7 64bit, Traditional Chinese as you notice from the screenshots, not sure if it has anything to do with the problem. Thanks!

Thank you very for the advice Pete, I will definitely try it. Thanks!

I'm working on EVA Air livery for 777, it looks ok at the moment but I found trouble to align the paint strip in a couple spot, I did some digging on internet without succes so I'm hoping any of experts here can help me to correct it please. 1. I found the strip at the nose section aren't align correctly and the thickness is somehow different while it was create from exact copy from the other side to the same spot. Not sure what I did wrong to cause such issue. 2. I'm having trouble to get strip aligned at the underside tail section where the curve joint to the straight lines. I tried to ajust it several times but it just never look perfect to me. how can I to get this align percisely in photoshop please? I use Photoshop, I learned about FSrepaint for awhile but still not sure if I should get it due to numerous of feedback I read on internet and if it does help on such problem. Any advice is apprecited! And excuse my english here, hope it is not difficult to understand

Many thanks for the good news, really looking for it! Glad that many of you have the same demand and respond to this topic, thanks guys!

So far I owned 747X (with the 2 expension pack), 737NGX and the new 777X, so I guess I can call myself a fan of PMDG aircrafts :lol: One of the unique feature I like from 777X is the Auto crurse, so I'm wondering if it would be possbile to have it in update or expension pack for other PMDG aircaft in the future please?

I also experienced CTD a few times with the 777x which I never ever had once with NGX and 747x with the same setup and addons. werid!

Experienced CTD twice which I believe could be the same issue here. Both in the same exact route from RCTP to VHHH happened shortly after the "DESCENT PATH DELETED" message show up. Not sure what really casue it.

Where? in my C drive :lol: still not yet get a chance to fly it but will be flying Emirate I guess.

Hi N60JBravo, I learn something again, thanks!

Hi kevin7898, Thanks for your reply and comment. Yes they are unpainted cause I couldn't find them in the paint kit, do you know which PSD file in the paint kit I sould be look into? Thanks!

Hi, I'm painting a PMDG 747X for fun but somehow I couldn't find the two little pieces on top of the aircraft. Can anyone fimilar with PMDG 747 reapint tell me where these pieces located in the paint kit please? Thanks!