Alberto Zanot

Hey all! I need some info maybe some of you could help me find out. Does Onair check your way of flying? Like if you do errors, like lights management, taxi knts, ecc... ? What does it checks exactly? So you have a flying rating over time? Simtoolkit pro does NOT seem to have a career. Does it? Hell, i miss FSPassengers so much... <- this is for real boomers ahahah

Sorry for resurrecting such an old thread. I would like to kindly ask if someone can pass me the installer of the DEMO compatible with P3D v3.3. FSPS removed from downloads. Answer from FSPS: "We removed the demo as it make no sense anymore. The program is working for all situations in any case". <--- ??? So basically no answer... Or at least the "make no sense anymore" sounds for real sensless to me. To be honest the whole sentence sounds sensless. But i would like to try it before buy. Thanks.

nope :/

I did some cool special light effects that require a lot of light slots. Nav, beacon, strobe, recog, taxi, landing, wing, logo... With radial diffuse illumination, require more and more slots

wow thank you all about all these infos!!! bytheway, i was wondering because i am developing an addon aircraft for P3D. P3D, like FSX, got a limitation in the [lights] section, of a maximum of 0 to18 entries. That sucks and i really dont understand why in ages of development this has not been fixed. The work around is to add the light effects in the [smoke] section and add a visibility rule in the model file itself. It work very good, but everything written in the [smoke] section is activated only with engines running. So basically, if the taxi lights and the landing light can be visible only with engines running, is not a real bad thing, right? Anyway the pilot can switch on taxi lights only after exiting the taxi area, and switch on the landing one lining up, which means that the engines are running for sure... If you play with an aircraft with this limitation, would you be irritated? What do you think?

Hello folks! I was wondering, in a real airliner, like a 737 or 757,the landing lights can be switched on only with engines running? And what about taxi lights? Thanks!

Thanks Jim! I always forgot to look at the good ctd guide I got myt x indeed. I will try to chose another schedule,and i will report.

Hello! I was flying from Istanbul to Cairo and near Ankara i contacted Ankara Center and after some seconds the sim quitted to desktop, without any prompt, without any event log. I started again the same flight. And it happened again at the same exact point, just after contacting Ankara Center. A third try, same. At the same exact point. A fourth time, without any addons. Same... :blink: P3D 3.3.5, Windows 10 64bit. This is out of my understanding. Could someone have any idea? Thanks a lot.

Thanks!!!

Hello! as per title, I was searching who was the founder (or first CEO) of BA. The year should be 1974. Thanks for the info!

Is it just me or opening-closing the doors closes the ATC window?? Both in FSX and P3Dv3

Graham, you are the man. thanks al lot. now it is all clearer. (tbh the widefs documentation is a little bit criptic) im going to try making this idea of remote ATC and i'll report. if everything works (also with showing the text on client) maybe it will be worth opening a thread about this utility. thanks again friend, without your input i would be still in stall

Thanks Graham! I dont figure out how to set keystrokes in wideFS. When i open wideclient.exe on the client pc i only see an empty window. Do you have any suggestion? Thanks again! PS: screenleap is nice, but i would have to have the atc open on the main fsx anyway. Need a way to show atc on the client via another way, maybe showtext.exe but i dont have ideas right now.

yep i also use "mouse without borders" app from microsoft itself and it is great, i know. the point here was completely different. thanks for your kind help and thoughts btw. i'm giving up on this. maybe one day someone will develop a program that shows and controls the default ATC on a networked client. have a nice flight!!!

Not exactly, but thanks anyway, looks like WideFS programming could be the way. Not so easy, but one can try. I'll try to be more specific and simple about what I would like to do. I have a client pc, running some stuff thru WideClient and other stuff thru SimConnect. WideClient sends data to FSUIPC in the server pc, the one running FSX. Everything works perfectly. Also ASN thru SimConnect. As a casual simmer with FSX, I feel confortable with the default FSX ATC. Now, I hate having to read and control the ATC on the main screen where I fly. I would like to read the ATC on the networked client, and control it from there. Hope I was clearer. There is no ATC addon that can do this. Now the answer could be: put a second monitor on the main FSX pc and drag the ATC there. This is a waste of resources 'couse I want to get most from the network config. Running FSX with two monitors drops the framerate and in DX10 got a lot of other issues.

I will try to be more clear and simple. Glynn, as i said on post number 5, THE WORKS VERY WELL in network config, i know it. BUT BUT BUT You have to control them via main fsx pc. I want something that control the ATC ON THE CLIENT PC, with the other keyboard, ANOTHER PC.

thanks anyway jaime!! peter, i am still not skilled enough for close-to-real procedures :( maybe one day.. tom, from voxATC website: Can VoxATC X be run on a 2nd PC via WideFS? No, The current version must run on the same machine as MSFS so that the prompt window can be updated. Future versions will work remotely.

no no never talked about AI. I would like to read and control the ATC from another PC. That is all. btw i tried proflight emulator, and it has to be controlled by the main pc, as every other atc i've tried :( i think i will never get this. giving up.

I'm going to check it out, and i will report. bytheway, if you think about it, what i would like to achieve is very very simple! a little program running on a networked pc, that controls the ATC, even the default atc... i've spent 2 days looking for something like this... nothing! i think i will do better if i program it myself, i will ask Pete if WideFS and FSUIPC can interact with the atc somehow.

again, yes, RC and VOXATC do network connection, but, they can be controlled only from main fsx pc. thank you very much i will look into PFE.

yes and the connection with ASN works. i meant PROATC-X, sorry, i mistyped. well, as i was saying i have it and it is not controlled from the client, nor you can read the atc from there.

Hello! I would like to kindly ask if somebody knows an ATC addon (pay or free) that can be installed and controlled from a networked client. I have Radar Contact and ATCPRO-X, but they both shows on the main FSX pc and can be controlled only from the main FSX pc. I just would like to read and answer/control the ATC from the client pc. Thanks a lot!

Thank you Jim! In fact i've solved uninstalling the infamous KB2670383

hello, i got random crashes, this is the log: Nome dell'applicazione che ha generato l'errore: fsx.exe, versione: 10.0.61637.0, timestamp: 0x46fadb14 Nome del modulo che ha generato l'errore: d3d11.dll, versione: 6.2.9200.16570, timestamp: 0x5153774d Codice eccezione: 0xc0000005 Offset errore 0x000a49a8 ID processo che ha generato l'errore: 0x136c Ora di avvio dell'applicazione che ha generato l'errore: 0x01d042d3329a4c56 Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe Percorso del modulo che ha generato l'errore: C:\Windows\system32\d3d11.dll ID segnalazione: fed111d6-aec9-11e4-9dd1-d43d7e519175 it is related to d3d11.dll, my system is uptodate (DX, video drivers, ecc) do i got the right version of d3d11.dll? looks like it is the same exacxt file that there is in syswow64 folder. arent they supposed to be one 32bit, other 64? thanks for any help!

I've solved. it was JSG Panels - Universal FMC addon causing the problem.