gillesbdx

Hi JL, it's royal why make it simple when you can make it complicated! so I used for those who are interested: in my Sioc code: Var 2546, name AP_APPR_sw, Link IOCARD_SW, Input 63, Type P // Poussoir PA mode APPR { If &AP_APPR_sw = 1 { &joy64 = SETBIT 3 } ELSE { &joy64 = CLEARBIT 3 } } var 2631 , name joy64, link FSUIPC_INOUT, Offset $3340, Length 4 this triggers a button via virtual joystick fonction of fsuipc. then in FS/P3D addon menu fsuipc, button+switch, I press the APPR button of my AP and I assign the command fs AP APPR HOLD on when pressed and ....off when released. thanks again for the suggestion Jean-Luc, the fact is that my AP works very well in ILS has blocked me to imagine that the problem comes from my code. kind regards gilles

hi Jean-Luc i 've tested and it's ok when i used the mouse clic on AP button of kingair 350 panel and APPR . i use this fsuipc offset witch are ok for an ILS approch: Var 2544, name AP_APPR_fs, Link FSUIPC_INOUT, Offset $0800, Length 4 // Commande PA mode APPR Var 2545, name AP_GS_CAPT, Link FSUIPC_INOUT, Offset $07FC, Length 4, Value 0 // Commande capture du Glide i 'm going to look for 0ther offset, i hope find it. if you know a good one ... thank's in advance.. best regard gilles

i 'll test it asap, and back to you thank's for this idee. gilles

merci JL, in fact i use native aircraft KING AIR 350 included in P3D4. and i use classic fsuipc offset to activat AP in GPS mode. i don't know how to inject vcdi (glide )information into the autopilot with this kingair350 here the home cockpit. https://drive.google.com/open?id=1Wp1U3AcHQxTnp0gpkew32uGQ5PVOacnS have a good night. gilles

Hi Jean-Luc, Thank's for this repply. i had allready read this topic . but concretely, under p3d v4, how to take the glide by the AP while it is already active on the NAV mode. before no glide in LPV ok the question did not arise but now ...? I tested the APPR mode is no effect and the plane does not go down. unless I am mistaken, I have not seen any information that deals with that. good Sunday gilles

Hello everyone I just installed the 2.440 update. it was hopeless to have LPV management in Europe and this because the garmin 530 trainer application that was at fault (too old and abandoned by Garmin). also it's magic and it works now, thanks to RXP developper. now we have a precise glide in LPV for RNAV Gnss procedure in EUROPE. My question is: is it possible to couple the autopilot in GPS mode on this glide and if so how? (APR does not work nor NAV, only LOC is followed) Thanks and best regard Gilles from LFBD

no still tested, i'm not near my home cockpit.... Thanks for this correction. gilles

It would be nice if Mr. RXP "Jean-Luc" says whether or not new version is in question for this problem. it would avoid unnecessary palaver and reassure us. but I have the impression that he only writes here once on Fridays. I would have liked to say it in French ..... thank you

for Jean Luc, hi, here is my logs files as request: my issue is always no coupling PA to Garmin. pc : W10 new and updated, P3D v4.1 , king air generic . RXPGNS2.gau.log 18/02/16 05:14:46.447 03468 - ] # rxpGNS2.dll version 2.3.9.0 18/02/16 05:14:46.447 03468 INFO ] rxpGNS2_menu.dll.log 18/02/12 15:14:56.612 00812 - ] # rxpGNS2_menu.dll version 2.0.7.0 18/02/12 15:14:56.617 00812 INFO ] edit panel: D:\Prepar3D v4\SimObjects\Airplanes\IRIS Raptor Driver\panel\panel.cfg rxpGnsSim.dll.log 18/02/16 05:14:48.666 03468 - ] # rxpGnsSim64.dll version 2.3.9.0 18/02/16 05:14:48.666 03468 INFO ] 18/02/16 05:14:53.112 10320 INFO ] 18/02/16 19:03:30.762 01036 INFO ] rxpgnsSim after logtrainer = 1 18/02/17 10:46:01.941 08596 - ] # rxpGnsSim64.dll version 2.3.9.0 18/02/17 10:46:01.940 08596 INFO ] 18/02/17 10:46:06.371 07516 INFO ] 18/02/17 10:48:28.460 01944 INFO ] GTN: 865084275 001f -44 .\hwm_voice.c (704): Region read error on audio header data i hope a solution to my, and any other users, problem . best regards gilles

for Jean Luc, hi, here is my logs files as request: my issue is always no coupling PA to Garmin. pc : W10 new and updated, P3D v4.1 , king air generic . RXPGNS2.gau.log 18/02/16 05:14:46.447 03468 - ] # rxpGNS2.dll version 2.3.9.0 18/02/16 05:14:46.447 03468 INFO ] rxpGNS2_menu.dll.log 18/02/12 15:14:56.612 00812 - ] # rxpGNS2_menu.dll version 2.0.7.0 18/02/12 15:14:56.617 00812 INFO ] edit panel: D:\Prepar3D v4\SimObjects\Airplanes\IRIS Raptor Driver\panel\panel.cfg rxpGnsSim.dll.log 18/02/16 05:14:48.666 03468 - ] # rxpGnsSim64.dll version 2.3.9.0 18/02/16 05:14:48.666 03468 INFO ] 18/02/16 05:14:53.112 10320 INFO ] 18/02/16 19:03:30.762 01036 INFO ] rxpgnsSim after logtrainer = 1 18/02/17 10:46:01.941 08596 - ] # rxpGnsSim64.dll version 2.3.9.0 18/02/17 10:46:01.940 08596 INFO ] 18/02/17 10:46:06.371 07516 INFO ] 18/02/17 10:48:28.460 01944 INFO ] GTN: 865084275 001f -44 .\hwm_voice.c (704): Region read error on audio header data i hope a solution to my problem. best regards gilles

WARNING.... this file is just for fs9.1 (fs9 updated simulator with fs91upd). make a backup of your sim1.dll before (fs9/modules folder) https://drive.google.com/open?id=0B5Z-pHmLfK6lcDlEcmJTX3NTTms say me if this work after that. best regards gilles from France...(sorry about my bad English...)

Hello jean luc... it's gilles from bordeaux. i repeat my question here: -P3D V4.1 on a fresh and new PC -W10 install this month. -gns530 v2. all seem work fine in the gauge. but no effect with PA in nav/appr mode and GPS green actif. Is SIMCONNECT manual install is mandatory To GNS530 v2 work in P3D v4 (new PC) w10 and only one installation P3D? regards gilles with an other PC friend i had the same issues, gns530 v1, w7, fs9.1, and it was sim1.dll that i have been during installation' Garmin error. i have changing by another one and it was good after that. best regard and tanks for you return. Gilles

I have send you a message in you box with a drive link. of couse the sim1.dll is for fs9.1 update. for my probleme: Is simconnect is mandatory To GNS530 v2 work in P3D v4 (new PC) w10 and only one installation P3D? regards gilles

hello few month ago i had same issues. fs9.1, and 53 waas v1. all work but no gps autopilot.... i have change the sim1.dll and this was ok (magic.) if you want i can send you this file. gilles

HI all, i have the same problem. P3D V4.1, Windows10, RXPGNS530 v2 new installation all work fine exepted no autopilot in gps mode. on old sim fs2004 and gns530 v1 i had same problem. it was the sim1.dll file it was bad... may be help. best regards