RodgerC

I removed everything except the asobo longitude and still can't get it to work. Will keep trying until I get it to work.

So I did what you said. Good news is it restored the TBM 930 with full G5000 avionics. Even the Honda Jet has the full avionics. The bad news is the Longitude still does not have the G5000 avionics. Going to start deleting some of my Longitude addons and see if I can find out if one of them is causing the problem.

Going to try that. Thanks

Wow, something is really wrong. Started up the TBM 930 and the wings were visible but no cockpit. Like only half of the airplane was there. The Longitude is good except the avionics are not correct. Well back to the drawing board.

I guess it does not Bert. I just got MSFS 2020 reinstalled and noticed that the avionics are not the same as the previous Longitude that was installed earlier. How do I find out? Is there a way to fix it?

I recently had to reinstall MSFS 2020. My favorite airplane is the Cessna Citation Longitude. I have noticed since I reinstalled the flight sim, that I no longer have the buttons on the bottom of the PFD, just a blank bar. All of the relevant Longitude programs in the Content Manager is installed. Am I missing something? I also have Garmin G3000 folders in the Community folders just can't figure out how to get the correct setup. Can someone point me in the right direction to get this fixed? Thanks

Yeah, I got it uninstalled like you did. I have been downloading MSFS for about 30 hours now. Appears to be about 3/4 done. Not ever doing that again....

Glad you reminded me. I did have the NVDA app. This thing is killing me. I'm trying to reinstall MSFS 2020 and in the middle of it, it just quits. So I exit out of MSFS restart my computer then try to resume the download and I get the error code again. So I found the NVDA app and got rid of it and did a successful restart so now I'm thinking I'm good. The download stops again. I restart MSFS and get the error code again. I think I'm in trouble. I have reinstalled Windows 10, got rid of the NVDA app and am still getting the error code. Just spent over $1500 upgrading to a new Nvidia RTX 4070 GPU, and maxed out my motherboard with an Intel i9-9900 cpu, a new Meta Quest 3 VR headset now I can't even get MSFS reloaded on my computer. I'm done if I can't get this thing reloaded. Not paying $2-3K for a new gaming computer. Been trying to download for about 10 hours now and about half of it is downloaded.

Pete, sorry. It is the store version. Please see my last post. Thanks.

For anyone that is interested I have solved the problem. I found a YouTube video on how to reinstall Windows without losing files and apps. Google "Windows media creation tool". Watch this video from Trevor Nace on "How To Reinstall Windows 10 Without Losing Apps, Data Or Files". It worked perfectly. Took me about 2 hours to go thru the entire process but it worked. No need to do a total reinstall and wipe out all my data. Totally amazing. A couple of people in the comments had a couple of problems, but for me it worked flawlessly. However, because I uninstalled and reinstalled MSFS 2020 it is doing a 3TB update. If I had to do it over again, knowing what I know now, I would not touch MSFS and just do the Windows 10 reinstall. Hope this information helps someone in the future.

I got this message last night after trying to load MSFS 2020. The game has crashed. Error code: (0xc0000005). I have read articles and posts on this and it seems as though the only option is to uninstall and reinstall. So I did that and I get the same error message. Can anyone tell me what to do now. Not exactly a computer guy. Thanks Rodger

Can't find it there either.

I can't seem to find the file to open vraas. The only thing I can find is the RAAS log file and lua file that is found in FSUIPC7. Thanks for your help.

I'm just curious as I have been using the VRAAS in MSFS 2020 but now I'm getting an annoying "RAAS System Test OK" on nearly every landing now. Is there any way to stop that or would I need to just remove the program to stop it? Thanks.

Thanks for the help. Sometimes I notice that there is no altitude listed in any of the waypoints throughout the route. Sometime it's just frustrating. BTW, notice your from Columbus, Ohio. I live on the west side. Near Galloway.

Hey guys, several times I have done some flight plans and have pulled them up to fly them in the Longitude but for some reason the VNAV gives no information. Can someone tell me what I'm doing wrong and why I'm not getting the VNAV information. The flight plans are IFR. Sometimes I don't use a departure procedure but usually end with an ILS or RNAV approach. Sometimes I get the information sometimes I don't. Not sure if it is my fault in how the flight plan is set up or what. I use LITTLNAVMAP to do my flight plans. Would appreciate your input. Almost exclusively fly the Longitude and really like the VNAV when it is working. Thanks for your help.

I just figured it out. I was using Process Lasso to help run MSFS 2020 and for some reason, I decided to not run it and all of a sudden it's not crashing any more. Only took me 5-6 hours to figure it out. Frustrating, but now it's time to fly!!!!

Actually yes I am using the app. I just rolled back the Windows 10 update so it's not that. I will now follow up on your suggestion. Yeah, the 141 was my favorite airplane. FE on the C-130, C-141, and C5a. Thanks for the tip. I sure hope I can figure this out. I just got a Meta Quest 3 for VR and it is incredible. Gotta get this thing going again. Thanks a lot. I'll let you know what I find. Much appreciated.

Last night as I went to shutdown my desktop computer, there was a notification that an update was ready to be installed. So I selected install and restart. After the update I shut the computer down and this morning when I went to go to MSFS 2020 it began to CTD. I am 3 hours into trying to figure out what is causing the CTD but cannot figure it out. The only thing that has changed is the update to windows 10. I have tried tracking down anything that might cause the crashes but can't find whatever is causing the problem. I have searched YouTube and forums, but no matter what I try it fails to correct the problem. Anyone have any ideas. Thanks. Rodger

Been flying the Cessna Citation Longitude and noticed the altitude call outs on approach volume is very low. I've checked my system volume settings, MSFS settings in the options tab. I've checked everywhere I can think of to increase the volume, but all the settings are all ready set to 100%. Don't know if I'm missing anything or not. Maybe it is what it is and that's it. Any suggestions? Thanks

2020

Every time I open the Cessna Citation Longitude in the cold and dark mode immediately all lights and PFD and MFD's are flashing. There is nothing I have been able to do to stop them. I go to external power and start the APU but when I try to put the APU on line all lights continue to flash. When I go to external power, I can start the APU but then when switching to APU power, the APU shuts down. The only way I can fly the airplane is to open it up on the runway. I have no idea as to how to solve this problem. Anyone have any suggestions? To be honest I don't know if this happens on other airplanes, as this is the only one I fly. By far my favorite airplane. Would appreciate any suggestions to solve this problem. Thanks. Rodger

Great, thanks for the info. Appreciate it.

Will the f1 GTN 750 work in X-Plane aircraft? I'm getting ready to switch from FSX:SE to X-plane 11 and don't want to have to purchase the Reality XP GTN 750.

Bozdog, YOU SIR ARE THE MAN!!!!! I have fought this for a solid 4 days and I figured it would be something simple. Couldn't see the forest for the trees. Thanks for the help. Always helps with an extra set of eyes. Much appreciated.