Jump to content

JPR

Members
 View Profile  See their activity

  • Content Count

    112

  • Donations

    $0.00 

  • Joined

  • Last visited

Posts posted by JPR

  2. Posted · Edited by JPR

    @ubergeek99   In Bitdefender, "Advanced Threat Defense" section, "Parameters" menu, click on "+ Add an exception" and specify the P2A installer executable file. You will then be able to run the P2A installer. Check all checkbox.
    I occasionally have this problem with P2A update executable files. These are false positives that are wrongly detected by Bitdefender. When this happens, I do as I said by creating an exception in Bitdefender.

  3. Posted · Edited by JPR

    Yes, the trainer is installed.
    I was able to get the GTN750 to work with the various databases. It's OK now.

    The problem there was:
    When I had installed the RXP GTN750 on my old computer in 2020 with X-Plane 11, I had a particular installation configuration for the various elements of the RXP GTN750 (custom directories).
    When I wanted to install it today in 2023 with X-Plane 12 and a new computer, the installer had used the configuration I had in 2020 (no doubt stored on their servers). Wanting a default installation, the installer refused to do this, even though I indicated that I wanted a default installation. The result was that the databases could not be found with the old configuration. 
    I uninstalled the RXP GTN750 and redid the installation. This time the installer agreed to do a default installation in the choice of directories. This time the RXP GTN750 works correctly and finds the databases with a default installation.

    • Like 1

  6. Posted

    I have the same problem (commercial version).

    When I run Pilot2ATC (release version) a small window appears very briefly, without any content, and closes immediately. The program does not start.
    With the beta version, a window opens indicating a server access failure.  The program does not start.

    I have to start Pilot2ATC (release or beta version) several times and at one moment it accepts to start. It is not normal to be obliged to do that to succeed in starting it. Perhaps the access to the server for validating the key is very or too difficult.

  7. Posted · Edited by JPR

    I have the same problem (commercial version).

    When I run Pilot2ATC a small window appears very briefly, without any content, and closes immediately. The program does not start.

    I have to start Pilot2ATC several times and at one moment it accepts to start. It is not normal to be obliged to do that to succeed in starting it. Perhaps the access to the server for validating the key is very or too restrictive.

  9. Posted

    Hello Dave   🙂

    For the sound: whatever the volume setting of the co-pilot's voice in the P2A options, his voice will always be heard at maximum (as 100%), even if I set the co-pilot's voice to 0% in the P2A options. Pushing the overall volume in Windows to hear the ATC voices will make the co-pilot's voice much too loud. It is not possible to specifically lower the co-pilot's voice in the P2A options, it is not effective. 

    ---------

    For the Taxi Mnt window: for example in the screenshot below, it is impossible to move the mouse pointer into the Taxi Mnt window: this window disappears automatically as soon as the pointer passes over the map (red area here), I don't click anywhere, I just move the mouse pointer towards the Taxi Mnt window. I have to bring it to the foreground again with the Alt Tab keys to use it. 
    Or I have to move the mouse pointer by the top of the P2A window to the Taxi Mnt window without hovering over the map.

    p2a-taximnt.jpg

     

     

  10. Posted

    Hi Dave   🙂

    Pilot2ATC 2.6.3.0 Public Beta 1h

    "Gate and Taxiway Maintenance" window:
    When this window is displayed, if the mouse pointer hovers over the map, then this window automatically goes into the background. We must then use Alt-Tab to bring it back to the foreground.


    ATC volume:
    Even with the volume set to 100% for all ATC voices in the options (chatter and all voices at 100%) and the volume set to maximum in the "P2A COM Frequency" window, the volume of the ATC voices remains too low compared to the volume of the co-pilot's voice. If in Windows we increase the volume of the Pilot2ATC application to better hear the ATC voices, then the co-pilot's voice is much too loud.
     

  13. Posted

    Hi Dave   🙂

    P2A v2.6.3.0 PublicBeta1F

    Taxi Mnt window: 
    After opening the Taxi Mnt window with the "Taxi Mnt" button, it turns green, which is correct. But when we close the Taxi Mnt window by using the little close cross at the top right of the Taxi Mnt window, the "Taxi Mnt" button remains lit in green. It is not normal to have this button lit in green if the Taxi Mnt window is not displayed.

    However, if we close the Taxi Mnt window by using the "Taxi Mnt" button again, this button turn correctly into white.

     

  15. Posted

    Hello Dave   🙂
    P2A v2.6.3.0 PublicBeta1b

    TaxiMnt feature:
    When I click on the "TaxiMnt" button, the TaxiMnt window opens correctly now. But it is the "Config" button that turns green, not the "TaxiMnt" button. When I close the TaxiMnt window, the "Config" button remains lit in green. I have to click twice on the "Config" button to turn it off.

    Taxi-Mnt-Config-button.jpg

  16. Posted · Edited by JPR

    Hello Dave   🙂
    P2A v2.6.3.0 PublicBeta1a

    Com Control panel:
    COM1 is active. The volume bar graph is at about 75%. The Up and Dn buttons do not move the value in the bar graph, it stays at about 75%.
    However, if I switch to COM2, the Up and Dn buttons do change the content of the bar graph (green area).
    If I switch back to COM1, the bar graph keeps the setting made with COM2.


    Note: by pushing the volume to the maximum with the Up button, the bar graph does not fill up completely in green, but maybe the software considers that it is at 100%.

    ----

    In this PublicBeta1a, the "Taxi Mnt" button no longer works. The Taxi Mnt window no longer appears.

     

  18. Posted · Edited by JPR

    Hi Dave   🙂
    I just installed the new public beta2f version from your website.
    The volume in the screenshot in my previous post, does indeed change the volume of the ATC voices. By setting this volume to full, the pilot's voice and the chatter sounds are loud, but the ATC voices are heard more softly. It would be nice if the ATC voices were heard as loud as the pilot's voice.

  19. Posted · Edited by JPR

    Hi Dave   🙂

    [EDIT] see my next post....

    ------

    I have tested: in the COM control panel, the volume designated in the screenshot below, only controls the volume of chatter sounds, it does not control the volume of ATC voices.

    Where can the volume of ATC voices be adjusted globally ? (in Config/Voices the volume of all ATC voices is already set to 100%, but we hear them very weakly on the radio)

    chatter-volume.jpg

    • Like 1

  20. Posted · Edited by JPR

    Hello Dave   🙂

    Pilot2ATC version 2.6.2.4_x64_PublicBeta2f7 (under test)

    The pilot voice is ok (loud), but all the other ATC voices are very weak. However, the volume is set at maximum (100%) for each of the ATC voices in the configuration window (see the attached screenshot and the configuration files).
    Note: with the relesase version of pilot2ATC (v2.6.2.3_x64-R2) and the same setup pour the voices, the volume of all ATC voices is OK (loud)

    Configuration file: https://www.dropbox.com/s/qzimip7qi5xcyf8/p2a_beta2f7_files.zip?dl=1

     

    low-atc-sounds.jpg

     

  21. Posted · Edited by JPR

    Thank you for this answer.

    Another test with the VFR flight plan: LFRZ => NTS => LFEY (this time without RNAV arrival) - AIRAC 2112

    1 - With P2A v2.6.2.4_PublicBeta2e, I have the same problem: I cannot transmit the VFR flight plan, the "File" button does not turn green. When I ask for VFR clearance, I get the same SayIt message.

    P2A-beta.jpg

    -----------------------------

    2 - With the P2A release v2.6.2.3-r2, there is no such problem with the same VFR flight plan. The flight plan transmission works fine (the "File" button turns green) and the VFR clearance request is OK.

    P2-A-release.jpg

    ---------------------------

    The two corresponding log files: (we see errors in the flight plan management in the Pilot2ATC v2.6.2.4 PublicBeta2e log file)

    https://www.dropbox.com/s/oxzsd86u4ntde1b/Log.zip?dl=1

     

     

  22. Posted

    Hello  🙂

    P2A v2.6.2.4_PublicBeta2e - AIRAC Cycle 2112
    I have a problem with the VFR flight plans:
    For example with the LFRZ/NTS/LFEY flight plan and the RNAV 32 transition GIGEX approach, I can validate this flight plan in P2A, but when I want to transmit it (File function), the "File" button does not turn green. 
    I also have this problem with other VFR flight plans.
    If I request VRF clearance, I always get the message as shown in the screenshot below ("say again request with destination airport")
    I don't know what the problem is.

    Note: with P2A release v2.6.2.3-r2 and AIRAC 2112, the transmission of the VFR flight plan is fine, the "File" button turns green and I can transmit the VFR flight plan to ATC.

    p2a-vfr-pln.jpg

     

×
×
  • Create New...