Ive run into a problem, I havnt used fs in some time and have redone my pc a while ago having had to reinstall evrything i had for fs. I decided today to start getting all my key assignment how i had them before to maybe get a flight in tonight but i ran into a snag that i cant figure out.I calibrated my yoke and everything looks fine within the calibration screen but when i start fs all the buttons work for gear flaps etc. on the yoke except for the throttle mixture prop and elevator aileron controls. Ive tried playing around with the sensitivities and still nothing. I know it is not the controls on the yoke that are broken as it shows they are working on the calibration screen. Ive tried other diffrent aircraft and still no luck. Ive also made sure joystick is enabled.Anyone ever run into this sort of problem that can help me out, Maybe im missing something very simple, I dont know.P.S also what is the setting to see scenery from further away. I can only see nice and clear in front of my aircraft but everything else is blurry. ThanksMy fs was setup perfect the way i had and now everything seems to be problematic, i kind of wished i hadnt redone my pc. :(Thanks for any advice you may have.Gerry

Ive run into a problem, I havnt used fs in some time and have redone my pc a while ago having had to reinstall evrything i had for fs. I decided today to start getting all my key assignment how i had them before to maybe get a flight in tonight but i ran into a snag that i cant figure out.I calibrated my yoke and everything looks fine within the calibration screen but when i start fs all the buttons work for gear flaps etc. on the yoke except for the throttle mixture prop and elevator aileron controls. Ive tried playing around with the sensitivities and still nothing. I know it is not the controls on the yoke that are broken as it shows they are working on the calibration screen. Ive tried other diffrent aircraft and still no luck. Ive also made sure joystick is enabled.Anyone ever run into this sort of problem that can help me out, Maybe im missing something very simple, I dont know.P.S also what is the setting to see scenery from further away. I can only see nice and clear in front of my aircraft but everything else is blurry. ThanksMy fs was setup perfect the way i had and now everything seems to be problematic, i kind of wished i hadnt redone my pc. :(Thanks for any advice you may have.Gerry

Did you check your assignments? Are you using FSUIPC? If you are using the FS assignment applet, be sure that the drop down box at the right just above the main assigment box is showing your yoke. Also, do you have other controllers connected? Answers to these questions will help in finding your issue.Jim D.

Ive run into a problem, I havnt used fs in some time and have redone my pc a while ago having had to reinstall evrything i had for fs. I decided today to start getting all my key assignment how i had them before to maybe get a flight in tonight but i ran into a snag that i cant figure out.I calibrated my yoke and everything looks fine within the calibration screen but when i start fs all the buttons work for gear flaps etc. on the yoke except for the throttle mixture prop and elevator aileron controls. Ive tried playing around with the sensitivities and still nothing. I know it is not the controls on the yoke that are broken as it shows they are working on the calibration screen. Ive tried other diffrent aircraft and still no luck. Ive also made sure joystick is enabled.

You are really asking this question on the wrong forum - this thread on CH Products' own forum should resolve the issue:http://www.ch-hangar.com/forum/showthread....38926#post38926John

Did you check your assignments? Are you using FSUIPC? If you are using the FS assignment applet, be sure that the drop down box at the right just above the main assigment box is showing your yoke. Also, do you have other controllers connected? Answers to these questions will help in finding your issue.Jim D.

Im using the uregistered fsuipc, ya i made sure that the ch yoke is selected from the drop down menu, No other controllers connected to my pc.Im going to try stuff from that link John gave me and see. I find it very bizarre that it will not work how it used to.Thanks