I bought the reality XP T gauges to outfit my Bonanza with and I am a little stuck. I've been able to get the Altimeter and Airspeed Indicator placed and looking/functioning well but have not had luck with the rest of the instruments. Turn Coordinator, Vertical Speed, and HSI have me whipped? Would anyone using these gauges in their Carenado Bonanza V35 (FSX) be so kind as to post their panel .cfg or send me a private message with it. I would eventually like to get the N gauges and the 430 GPS but it looks like without the help from others more gifted at panel editing than myself I'll find more frustration than what it's worth. Thanks in Advance,Robert

I bought the reality XP T gauges to outfit my Bonanza with and I am a little stuck. I've been able to get the Altimeter and Airspeed Indicator placed and looking/functioning well but have not had luck with the rest of the instruments. Turn Coordinator, Vertical Speed, and HSI have me whipped? Would anyone using these gauges in their Carenado Bonanza V35 (FSX) be so kind as to post their panel .cfg or send me a private message with it. I would eventually like to get the N gauges and the 430 GPS but it looks like without the help from others more gifted at panel editing than myself I'll find more frustration than what it's worth. Thanks in Advance,Robert

Sent you a copy of my panel :(

Hi Bert,Like I said in our PM I got your panel .cfg and since I was planning on getting the N gauges and the 430gps I went ahead and sprung for them too. However when I tried to use your panel .cfg my VC and panel turn basically transparent. I assumed since we now have the same plane and gauges I could just use the panel.cfg you provided but it looks like that's not the case. The only thing I can think of is my settings inside the FLT, FLN, and 430 software configuration programs don't match what you have set up. I can switch back to the default panel and everything goes back to normal, also the Mooney that the gauges install in is fine. I guess I'm going to have to roll up my sleeves and hash this out the hard way, which will probably teach me more in the long run anyway.The only other thing I can think of would be to copy your three .ini files (RXPFLN, RXPFLT,and RXPSTACK) and place them in my panel folder because it looks like you can copy configure the software by importing those files.Not sure what other variables would cause this to not line up but I guess that's what i get for trying to take the easy route. Robert

Hi Bert,Like I said in our PM I got your panel .cfg and since I was planning on getting the N gauges and the 430gps I went ahead and sprung for them too. However when I tried to use your panel .cfg my VC and panel turn basically transparent. I assumed since we now have the same plane and gauges I could just use the panel.cfg you provided but it looks like that's not the case. The only thing I can think of is my settings inside the FLT, FLN, and 430 software configuration programs don't match what you have set up. I can switch back to the default panel and everything goes back to normal, also the Mooney that the gauges install in is fine. I guess I'm going to have to roll up my sleeves and hash this out the hard way, which will probably teach me more in the long run anyway.The only other thing I can think of would be to copy your three .ini files (RXPFLN, RXPFLT,and RXPSTACK) and place them in my panel folder because it looks like you can copy configure the software by importing those files.Not sure what other variables would cause this to not line up but I guess that's what i get for trying to take the easy route. Robert

OK... little reality check here.Just noticed you have the 35 Bonanza.Mine is the 33. The panel texture names could well be different in the two.. that would explain thetransparent panel.Have a look at the Vcockpit sections and only copy the gauges over.. this is to hoping that the gauges are in the exact same place..And yes, copy the ini files into your panel folder as well.

OK... little reality check here.Just noticed you have the 35 Bonanza.Mine is the 33. The panel texture names could well be different in the two.. that would explain thetransparent panel.Have a look at the Vcockpit sections and only copy the gauges over.. this is to hoping that the gauges are in the exact same place..And yes, copy the ini files into your panel folder as well.

Yeah, I just figured it out on my own and was coming back here to let you know. :( I am making some headway though as I have the panel back from being transparent and most of the primary instruments are in place including the 430 so I'm making progress. Looks like I also need to switch to the no 3d knobs version of the panel since I am seeing some conflicts there as well but all in all I'll get through it I think and will post more as i run into more problems. Thanks!

Yeah, I just figured it out on my own and was coming back here to let you know. :( I am making some headway though as I have the panel back from being transparent and most of the primary instruments are in place including the 430 so I'm making progress. Looks like I also need to switch to the no 3d knobs version of the panel since I am seeing some conflicts there as well but all in all I'll get through it I think and will post more as i run into more problems. Thanks!

Sorry about the initial mixup - glad you are figuring it out!Yes, no 3d knobs version is the one you want..Once you've done one aircraft - the next one is a breeze!

How do i go about changing to the no 3d knobs model I can't seem to remember where that option is located?Nevermind...I found it! Thanks!