August 10, 201114 yr Hi all,I know there has been many topics relating to autolands but I still have one problem,In 747-400X I can do full autoland, flair/rollout but on the NGX I can only get the flair to be shown.I approach G/S from below ILS freq. tuned in both Nav-1 & 2 both FD on, both CRS set for runway heading. after I have captured the G/S with one autopilot armed I try to arm the second, when I do I don't get the G/S in the pdf.I have tried changing the type of MCP which I am using and selected "Fail OP" but still not working.Please help.Mark
August 10, 201114 yr 737 doesn't have a rollout mode, only a flare, then you must disconnect autopilot and steer manually on the runway..
August 10, 201114 yr You might be unaware of the fail operational autoland requirements. If you check that on in the settings you'll get what you are looking for, of course the 737 has align and rollout capabilities. You need 2 APs and 3 IR sources though, which older NGs just don't have. Still I don't know as to why the 2nd AP might not arm. What do you mean when you say you "don't get the G/S" once arming the second AP, especially if you have already captured the G/S??
August 10, 201114 yr Mmmmmm, according to the FMA it does have rollout. It should say FLARE and ROLLOUT in white prior to landing, with LAND 3 in green. I believe the ILS has to support it though... not sure what the requirements are in FSX. | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
August 12, 201114 yr Hi all,I know there has been many topics relating to autolands but I still have one problem,In 747-400X I can do full autoland, flair/rollout but on the NGX I can only get the flair to be shown.I approach G/S from below ILS freq. tuned in both Nav-1 & 2 both FD on, both CRS set for runway heading. after I have captured the G/S with one autopilot armed I try to arm the second, when I do I don't get the G/S in the pdf.I have tried changing the type of MCP which I am using and selected "Fail OP" but still not working.Please help.Mark Hi Mark, Please check my post. Might be able to help you. http://forum.avsim.net/topic/343627-how-to-perform-an-autoland/ Roy Joven T. Benzonan AS136 - AirSource Virtual Pilot Union Acer Aspire 5738G, Intel Core 2 Duo (2.2Ghz), 4GB RAM, ATI Mobility Radeon (512MB graphics), Windows 7 (64-bit) Add-ons: Radar Contact V4, Activesky Evolution, FDC Live Cockpit Flight Planning: FSBuild2, Navigraph nDAC3 Aircrafts: PMDG NGX/747-8i, LDS 767, CS C130
Create an account or sign in to comment