I installed Beno

Hi therejust change the radio part in the aircraft.cfg file to this:[Radios]// Radio Type = availiable, standby frequency, has glide slopeAudio.1 = 1Com.1 = 1, 1Com.2 = 1, 1Nav.1 = 1, 0, 1Nav.2 = 1, 0, 1Adf.1 = 1Transponder.1 = 1Marker.1 = 1should work nowgreetsMcDaniel

I had the same problem. but fixed it! But there is a another problem,my brakes do not work! ? any ideas???

Dan,I assume you're using the SGA A300 right? If so, did you get the autopilot to work?To Rup... brakes work fine on mine. Which aircraft are you using?

I can't see any gauges even though I have installed the update. Any ideas?Misha

Of course I'm using the SGA A300. As for the autopilot it works fine, you need to engage the pitch trim and yaw damper for the autopilot to be usable.

Yep, sure am using our A300. Turn on the pitch trim and yam damper to enable the autopilot.

Hey RUP!My brakes do not work either. I got them to work 2 days ago by clicking a bunch of buttons, but I do not remember the right combination, and they do not work for me either. Everything else on this panel works well, even the Autopilot, but the brakes issue is a pain in the rear. I tried fioddling with the hydraulics system, as well as the electrical systems to no avail. Any ideas are really welcome folks!Thanks!Sincerely,Dennis D. Mullert

Dan,The manual picth trim is working so I assume it's engaged or is there something else that needs to be done? I used the startup all systems operating option just to "check it out." I'm sure I didn't turn on the yaw damper though. I'll try that when I get home tonight

I'm having a similar brake problem. I'm getting very little brake pressure and i'm not sure why. It makes taxiing very difficult.Alan