May 19, 201412 yr You need to get rid of all of Ray's KCLT bgl's and install Allen's so 36L has the right ILS freq and identifier. I have watched the video and if this is still what you see after installing Ray's bgl's then Ray's bgl's are not showing up since you only have two runways (36L / 36R) instead of three (36L / 36C / 36R). That tells me that Ray's airport is not activated. How did you install it?
May 19, 201412 yr Members 21 posts Joined 1 Month and 18 Days Ago. Gender:Male My PC My Simulator Posted Yesterday, 12:24 AM I have tried everything I could but for some reason I cannot get the airport in the right place. This is the default airport but as you can see that the runway is no where near where the plane should be landing. i can also see that in the patch of grassy area that the plane is landing on has some airport and runway signs on the ground like the airport was picked up and moved to the right. If anyone can help me with this problem I would greatly appreciate it. Hi, Steven, After reading through this thread, looking at the video and trying some experiments, this is what I think: You have some afcad installed that is not part of the default scenery. It is transmitting the correct frequency for the NEW runway 36L, 110.15, since you say that is what you tuned. I can hear the morse code for the correct identifier I-XUU, in your video, and the IAP for KCLT at Flightaware.com shows 110.15 and I-XUU as the identifiers for 36L. The invisible runway looks to be in the right place. So something installed the info for the NEW 36L but didn't do a good job on the scenery. When you enter an Rwy 36L approach into any PMDG aircraft with a reasonably recent Airac (Nav data), it will tune the correct frequency and heading for the NEW 36L. Its data should agree with what is found on flightaware.com The default scenery (if no additional AFCAD is installed), in map view, is showing 111.7 for the OLD 36L (which is presumably the NEW 36C). There is no KCLT runway with 110.15 in the default scenery. That's why I am sure something installed a file -- probably an AFCAD -- with the newer runway information, but it didn't do the visual scenery correctly. My guess would be VOX ATC is the source of the error, since, as an ATC program it probably includes up-to-date runway information. But I don't own it and don't know how it works. I am not familiar with all of all of your other addons either. You may be able to find the problem file by searching your entire FSX installation for a bgl file with "KCLT" in it. If you own Flight Sim Commander it may show you the name of the file from which it is getting its runway information. You can also try one of the above suggestions to put in an AFCAD with the correct ILS frequency and scenery display. But since you say that you do see some runway and airport signs where the new 36L should be, I think you will want to figure out what is the source for the faulty installation of the new 36L. Also, in your video there is a flat, grassy area extending to where 36L should be, which is not showing in the default KCLT. So there is some scenery there, but something is wrong with it. Unfortunately, Ray Smith's AFCAD for KCLT does not have the correct frequency for the new 36L. It is from December 2012, so perhaps the frequency changed since then. Everything else of his I've used has been first rate. Hope this helps! Mike
May 19, 201412 yr Author You need to get rid of all of Ray's KCLT bgl's and install Allen's so 36L has the right ILS freq and identifier. I have watched the video and if this is still what you see after installing Ray's bgl's then Ray's bgl's are not showing up since you only have two runways (36L / 36R) instead of three (36L / 36C / 36R). That tells me that Ray's airport is not activated. How did you install it? All that I did was install 3 files like instructed. 2 in the add on scenery folder and one in another folder just can't remember the name. Hi, Steven, After reading through this thread, looking at the video and trying some experiments, this is what I think: You have some afcad installed that is not part of the default scenery. It is transmitting the correct frequency for the NEW runway 36L, 110.15, since you say that is what you tuned. I can hear the morse code for the correct identifier I-XUU, in your video, and the IAP for KCLT at Flightaware.com shows 110.15 and I-XUU as the identifiers for 36L. The invisible runway looks to be in the right place. So something installed the info for the NEW 36L but didn't do a good job on the scenery. When you enter an Rwy 36L approach into any PMDG aircraft with a reasonably recent Airac (Nav data), it will tune the correct frequency and heading for the NEW 36L. Its data should agree with what is found on flightaware.com The default scenery (if no additional AFCAD is installed), in map view, is showing 111.7 for the OLD 36L (which is presumably the NEW 36C). There is no KCLT runway with 110.15 in the default scenery. That's why I am sure something installed a file -- probably an AFCAD -- with the newer runway information, but it didn't do the visual scenery correctly. My guess would be VOX ATC is the source of the error, since, as an ATC program it probably includes up-to-date runway information. But I don't own it and don't know how it works. I am not familiar with all of all of your other addons either. You may be able to find the problem file by searching your entire FSX installation for a bgl file with "KCLT" in it. If you own Flight Sim Commander it may show you the name of the file from which it is getting its runway information. You can also try one of the above suggestions to put in an AFCAD with the correct ILS frequency and scenery display. But since you say that you do see some runway and airport signs where the new 36L should be, I think you will want to figure out what is the source for the faulty installation of the new 36L. Also, in your video there is a flat, grassy area extending to where 36L should be, which is not showing in the default KCLT. So there is some scenery there, but something is wrong with it. Unfortunately, Ray Smith's AFCAD for KCLT does not have the correct frequency for the new 36L. It is from December 2012, so perhaps the frequency changed since then. Everything else of his I've used has been first rate. Hope this helps! Mike Hey Mike is there any file or files that I can send you so that you can see what the exact problem is? Thank You Steven Pow
May 19, 201412 yr Hey Mike is there any file or files that I can send you so that you can see what the exact problem is? Unfortunately no, since the problem could be a file or files in many different folders. But it occurs to me you could post a screen shot of your scenery library. Any scenery modification by any addon (or you of course) should show up in there. One possibility is that some scenery layer is in the wrong order, but I am not real knowledgeable about that stuff. You might just want to take a look in the scenery library and see if anything looks odd in there (you can get to it from inside FSX when it's running by World>Scenery Library). Mike
May 19, 201412 yr Author Unfortunately no, since the problem could be a file or files in many different folders. But it occurs to me you could post a screen shot of your scenery library. Any scenery modification by any addon (or you of course) should show up in there. One possibility is that some scenery layer is in the wrong order, but I am not real knowledgeable about that stuff. You might just want to take a look in the scenery library and see if anything looks odd in there (you can get to it from inside FSX when it's running by World>Scenery Library). Mike how about if I use ADE and take a screen shot of what it sees, would that help out? Thank You Steven Pow
May 19, 201412 yr how about if I use ADE and take a screen shot of what it sees, would that help out? I'm not sure that would help, as I think you have to tell ADE which file to open, and you want to know which file is causing problems. I think you might have better luck with the scenery library, although some added files won't show up, such as those in Addon Scenery/Scenery. Mike PS It might be a good idea to start a new thread with a title that would attract scenery gurus -- like "KCLT Scenery Conflict" or something like that. Just explain that you are receiving correct nav data for the new 36L but the runway is mostly invisible. Be sure and list your addons as I suspect one of them is causing the problem (since you haven't installed any scenery for KCLT).
May 20, 201412 yr Author I'm not sure that would help, as I think you have to tell ADE which file to open, and you want to know which file is causing problems. I think you might have better luck with the scenery library, although some added files won't show up, such as those in Addon Scenery/Scenery. Mike PS It might be a good idea to start a new thread with a title that would attract scenery gurus -- like "KCLT Scenery Conflict" or something like that. Just explain that you are receiving correct nav data for the new 36L but the runway is mostly invisible. Be sure and list your addons as I suspect one of them is causing the problem (since you haven't installed any scenery for KCLT). Ok I finally figured it out, What I did was go into the scenery selection and moved the add on scenery folder to the top of the list. I just hope it does not mess up anything else Thank You Steven Pow
May 20, 201412 yr Ok I finally figured it out, What I did was go into the scenery selection and moved the add on scenery folder to the top of the list. I just hope it does not mess up anything else This may well fix the problem. I'm not sure exactly where ADDON SCENERY should be in scenery order. Mine is just above other default scenery entries. All addon scenery folders are higher up in the list. Fly-Tampa Boston (<First addon scenery) Addon Scenery (< *****) Propeller Objects Global, Generic and Vehicle Libraries Etc. Curious to know where your Addon Scenery folder was before you moved it? I would guess that if it was lower down in the list than the folder containing the stock KCLT it would create problems such as the one you had. If you run into other scenery issues you could try moving it back to that point. Also curious to know, are you seeing the three parallel runways now with correct ILS on new 36L? You might want to take a look in ADDON SCENERY/SCENERY and see if there is some file that has KCLT in it. If so, that is most likely where the third runway nav and scenery info is coming from. Mike
May 20, 201412 yr Author This may well fix the problem. I'm not sure exactly where ADDON SCENERY should be in scenery order. Mine is just above other default scenery entries. All addon scenery folders are higher up in the list. Fly-Tampa Boston (<First addon scenery) Addon Scenery (< *****) Propeller Objects Global, Generic and Vehicle Libraries Etc. Curious to know where your Addon Scenery folder was before you moved it? I would guess that if it was lower down in the list than the folder containing the stock KCLT it would create problems such as the one you had. If you run into other scenery issues you could try moving it back to that point. Also curious to know, are you seeing the three parallel runways now with correct ILS on new 36L? You might want to take a look in ADDON SCENERY/SCENERY and see if there is some file that has KCLT in it. If so, that is most likely where the third runway nav and scenery info is coming from. Mike Yea the folder was pretty low but didnt really bother to look exactly where it was. Do you think it was a bad idea to make it the first folder in the list? Thank You Steven Pow
May 20, 201412 yr Yea the folder was pretty low but didnt really bother to look exactly where it was. Do you think it was a bad idea to make it the first folder in the list? I'm really not sure. I don't think it will mess up stock airports, but it might mess up ones with added scenery. If you see other issues, try starting a new thread with a title that will get the attention of some of the scenery experts, which I am not. Or, you could move Addon Scenery to the next place above "Propeller Objects" (assuming that is the highest FSX default scenery folder) and see if the problem comes back. If it does, just put it back to the top. Personally, if something like this happened to me (and it has!) I would want to get to the bottom of it. You did not install a modified KCLT but something -- very likely one of your addons -- did. I have seen references to AI traffic programs doing similar things (I have a lot of added AI but not a program that runs the AI or provides alternative ATC to the stock FSX). Am still curious to know whether you now see the 3rd parallel runway, new 36L w/ 110.15 I-XUU or you are back to the FSX two parallel runway default? You don't need to set it up with the NGX -- just put a default 737 at the 36L threshold, tune it to 110.15 and see if you have loc and GS. Mike
May 20, 201412 yr Author I'm really not sure. I don't think it will mess up stock airports, but it might mess up ones with added scenery. If you see other issues, try starting a new thread with a title that will get the attention of some of the scenery experts, which I am not. Or, you could move Addon Scenery to the next place above "Propeller Objects" (assuming that is the highest FSX default scenery folder) and see if the problem comes back. If it does, just put it back to the top. Personally, if something like this happened to me (and it has!) I would want to get to the bottom of it. You did not install a modified KCLT but something -- very likely one of your addons -- did. I have seen references to AI traffic programs doing similar things (I have a lot of added AI but not a program that runs the AI or provides alternative ATC to the stock FSX). Am still curious to know whether you now see the 3rd parallel runway, new 36L w/ 110.15 I-XUU or you are back to the FSX two parallel runway default? Mike Yes i now see all the runways and there is now a runway where there used to be grass. but remember that I downloaded and installed the new KCLT since the default KCLT does not have the new 36C runway Thank You Steven Pow
May 20, 201412 yr Moving Addon Scenery up in priority seems to mean that there was something above it that was preventing the airport with three runways from showing up. Paste your scenery.cfg file here so we can see what you have. Addon Scenery is usually just above Propeller Objects in the scenery.cfg file. I put all freeware airports in a folder called Addon AP Scenery\Scenery and put that above all other addons except addon airports that need their own folder. You really should leave Addon Scenery where it is suppose to be in the scenery.cfg. Here is what a part of my scenery.cfg looks like. Note that in the cfg the lower the number the lower the priority, the higher the number the higher the priority. It is backwards from looking at it in the scenery library screen. [Area.190]Title=MegaSceneryEarth ConnecticutLocal=G:\CT\ConnecticutLayer=190Active=TRUERequired=FALSE[Area.191]Title=MegaSceneryEarth ArkansasLocal=G:\AR\ArkansasLayer=191Active=TRUERequired=FALSE[Area.192]Title=FSGWaterfallsLocal=Addon Scenery\FSGWaterfallsLayer=192Active=TRUERequired=FALSE[Area.193]Title=FSGATAP_US_HILocal=Addon Scenery\FSGATAP_US_HILayer=193Active=TRUERequired=FALSE[Area.194]Title=FSG_ATAP_US_SEAKLocal=Addon Scenery\FSG_ATAP_US_SEAKLayer=194Active=TRUERequired=FALSE[Area.195]Title=VF-AIRLocal=Addon AP Folders\VF-AIRLayer=195Active=TRUERequired=FALSE[Area.196]Title=Static Objects LibraryLocal=Addon AP Folders\Static Objects LibraryLayer=196Active=TRUERequired=FALSE[Area.197]Title=Rwy12 LibraryLocal=Addon AP Folders\Rwy12 LibraryLayer=197Active=TRUERequired=FALSE[Area.198]Title=Runway MarkingsLocal=Addon AP Folders\Runway MarkingsLayer=198Active=TRUERequired=FALSE[Area.199]Title=MCDMil SceneryLocal=Addon AP Folders\MCDMil SceneryLayer=199Active=TRUERequired=FALSE[Area.200]Title=MCDFSXIraqLocal=Addon AP Folders\MCDFSXIraqLayer=200Active=TRUERequired=FALSE[Area.201]Title=Loney's Hangers and Buildings 1Local=Addon AP Folders\Loney's Hangers and Buildings 1Layer=201Active=TRUERequired=FALSE[Area.202]Title=Loney's EZ Scenery LibraryLocal=Addon AP Folders\Loney's EZ Scenery LibraryLayer=202Active=TRUERequired=FALSE[Area.203]Title=Lens EZ SceneryLocal=Addon AP Folders\Lens EZ SceneryLayer=203Active=TRUERequired=FALSE[Area.204]Title=Green Ground Service EquipmentLocal=Addon AP Folders\Green Ground Service EquipmentLayer=204Active=TRUERequired=FALSE[Area.205]Title=EZ Scenery LibraryLocal=Addon AP Folders\EZ Scenery LibraryLayer=205Active=TRUERequired=FALSE[Area.206]Title=Dan French Core LibrariesVol2_FSXLocal=Addon AP Folders\Dan French Core LibrariesVol2_FSXLayer=206Active=TRUERequired=FALSE[Area.207]Title=Alpha India Group Scenery ObjectsLocal=Addon AP Folders\Alpha India Group Scenery ObjectsLayer=207Active=TRUERequired=FALSE[Area.208]Title=3 GPS Oil Platforms V2.0Local=Addon AP Folders\3 GPS Oil Platforms V2.0Layer=208Active=TRUERequired=FALSE[Area.209]Title=Addon AP SceneryActive=TRUELayer=209Required=FALSELocal=Addon AP Scenery[Area.210]Title=Aust FTX AP'sActive=TRUELayer=210Required=FALSELocal=Addon AP Folders\Aust FTX APS[Area.211]Title=Aust OZx Ap'sActive=TRUELayer=211Required=FALSELocal=Addon AP Folders\Aust OZx APS[Area.212]Title=Ant's Aust AP'sActive=TRUELayer=212Required=FALSELocal=Addon AP Folders\Ants Aussie Airports[Area.213]Title=YWSG_Watts Bridge Mem AP_Toogoolawah OLDActive=TRUELayer=213Required=FALSELocal=Addon AP Folders\YWSG_Watts Bridge Mem AP_Toogoolawah QLD[Area.214]Title=YSCH_Coffs HarbourAP (v3)_Coffs Harbour NSWActive=TRUELayer=214Required=FALSELocal=Addon AP Folders\YSCH_Coffs Harbour AP (v3)_Coffs Harbour NSW
May 21, 201412 yr Author Moving Addon Scenery up in priority seems to mean that there was something above it that was preventing the airport with three runways from showing up. Paste your scenery.cfg file here so we can see what you have. Addon Scenery is usually just above Propeller Objects in the scenery.cfg file. I put all freeware airports in a folder called Addon AP Scenery\Scenery and put that above all other addons except addon airports that need their own folder. You really should leave Addon Scenery where it is suppose to be in the scenery.cfg. Here is what a part of my scenery.cfg looks like. Note that in the cfg the lower the number the lower the priority, the higher the number the higher the priority. It is backwards from looking at it in the scenery library screen. [Area.190] Title=MegaSceneryEarth Connecticut Local=G:\CT\Connecticut Layer=190 Active=TRUE Required=FALSE [Area.191] Title=MegaSceneryEarth Arkansas Local=G:\AR\Arkansas Layer=191 Active=TRUE Required=FALSE [Area.192] Title=FSGWaterfalls Local=Addon Scenery\FSGWaterfalls Layer=192 Active=TRUE Required=FALSE [Area.193] Title=FSGATAP_US_HI Local=Addon Scenery\FSGATAP_US_HI Layer=193 Active=TRUE Required=FALSE [Area.194] Title=FSG_ATAP_US_SEAK Local=Addon Scenery\FSG_ATAP_US_SEAK Layer=194 Active=TRUE Required=FALSE [Area.195] Title=VF-AIR Local=Addon AP Folders\VF-AIR Layer=195 Active=TRUE Required=FALSE [Area.196] Title=Static Objects Library Local=Addon AP Folders\Static Objects Library Layer=196 Active=TRUE Required=FALSE [Area.197] Title=Rwy12 Library Local=Addon AP Folders\Rwy12 Library Layer=197 Active=TRUE Required=FALSE [Area.198] Title=Runway Markings Local=Addon AP Folders\Runway Markings Layer=198 Active=TRUE Required=FALSE [Area.199] Title=MCDMil Scenery Local=Addon AP Folders\MCDMil Scenery Layer=199 Active=TRUE Required=FALSE [Area.200] Title=MCDFSXIraq Local=Addon AP Folders\MCDFSXIraq Layer=200 Active=TRUE Required=FALSE [Area.201] Title=Loney's Hangers and Buildings 1 Local=Addon AP Folders\Loney's Hangers and Buildings 1 Layer=201 Active=TRUE Required=FALSE [Area.202] Title=Loney's EZ Scenery Library Local=Addon AP Folders\Loney's EZ Scenery Library Layer=202 Active=TRUE Required=FALSE [Area.203] Title=Lens EZ Scenery Local=Addon AP Folders\Lens EZ Scenery Layer=203 Active=TRUE Required=FALSE [Area.204] Title=Green Ground Service Equipment Local=Addon AP Folders\Green Ground Service Equipment Layer=204 Active=TRUE Required=FALSE [Area.205] Title=EZ Scenery Library Local=Addon AP Folders\EZ Scenery Library Layer=205 Active=TRUE Required=FALSE [Area.206] Title=Dan French Core LibrariesVol2_FSX Local=Addon AP Folders\Dan French Core LibrariesVol2_FSX Layer=206 Active=TRUE Required=FALSE [Area.207] Title=Alpha India Group Scenery Objects Local=Addon AP Folders\Alpha India Group Scenery Objects Layer=207 Active=TRUE Required=FALSE [Area.208] Title=3 GPS Oil Platforms V2.0 Local=Addon AP Folders\3 GPS Oil Platforms V2.0 Layer=208 Active=TRUE Required=FALSE [Area.209] Title=Addon AP Scenery Active=TRUE Layer=209 Required=FALSE Local=Addon AP Scenery [Area.210] Title=Aust FTX AP's Active=TRUE Layer=210 Required=FALSE Local=Addon AP Folders\Aust FTX APS [Area.211] Title=Aust OZx Ap's Active=TRUE Layer=211 Required=FALSE Local=Addon AP Folders\Aust OZx APS [Area.212] Title=Ant's Aust AP's Active=TRUE Layer=212 Required=FALSE Local=Addon AP Folders\Ants Aussie Airports [Area.213] Title=YWSG_Watts Bridge Mem AP_Toogoolawah OLD Active=TRUE Layer=213 Required=FALSE Local=Addon AP Folders\YWSG_Watts Bridge Mem AP_Toogoolawah QLD [Area.214] Title=YSCH_Coffs HarbourAP (v3)_Coffs Harbour NSW Active=TRUE Layer=214 Required=FALSE Local=Addon AP Folders\YSCH_Coffs Harbour AP (v3)_Coffs Harbour NSW here is my scenery file, let me know if I should change anything [General] Title=FS9 World Scenery Description=FS9 Scenery Data Clean_on_Exit=TRUE [Area.001] Title=Default Terrain Local=Scenery\World Texture_ID=1 Layer=1 Active=TRUE Required=TRUE [Area.002] Title=Default Scenery Local=Scenery\BASE Layer=2 Active=TRUE Required=TRUE [Area.003] Title=0000 Base Local=Scenery\0000 Layer=3 Active=TRUE Required=FALSE [Area.004] Title=0001 Base Local=Scenery\0001 Layer=4 Active=TRUE Required=FALSE [Area.005] Title=0002 Base Local=Scenery\0002 Layer=5 Active=TRUE Required=FALSE [Area.006] Title=0003 Base Local=Scenery\0003 Layer=6 Active=TRUE Required=FALSE [Area.007] Title=0004 Base Local=Scenery\0004 Layer=7 Active=TRUE Required=FALSE [Area.008] Title=0005 Base Local=Scenery\0005 Layer=8 Active=TRUE Required=TRUE [Area.009] Title=0006 Base Local=Scenery\0006 Layer=9 Active=TRUE Required=FALSE [Area.010] Title=0007 Base Local=Scenery\0007 Layer=10 Active=TRUE Required=FALSE [Area.011] Title=0100 Base Local=Scenery\0100 Layer=11 Active=TRUE Required=FALSE [Area.012] Title=0101 Base Local=Scenery\0101 Layer=12 Active=TRUE Required=FALSE [Area.013] Title=0102 Base Local=Scenery\0102 Layer=13 Active=TRUE Required=FALSE [Area.014] Title=0103 Base Local=Scenery\0103 Layer=14 Active=TRUE Required=FALSE [Area.015] Title=0104 Base Local=Scenery\0104 Layer=15 Active=TRUE Required=FALSE [Area.016] Title=0105 Base Local=Scenery\0105 Layer=16 Active=TRUE Required=FALSE [Area.017] Title=0106 Base Local=Scenery\0106 Layer=17 Active=TRUE Required=FALSE [Area.018] Title=0107 Base Local=Scenery\0107 Layer=18 Active=TRUE Required=FALSE [Area.019] Title=0200 Base Local=Scenery\0200 Layer=19 Active=TRUE Required=FALSE [Area.020] Title=0201 Base Local=Scenery\0201 Layer=20 Active=TRUE Required=FALSE [Area.021] Title=0202 Base Local=Scenery\0202 Layer=21 Active=TRUE Required=FALSE [Area.022] Title=0203 Base Local=Scenery\0203 Layer=22 Active=TRUE Required=FALSE [Area.023] Title=0204 Base Local=Scenery\0204 Layer=23 Active=TRUE Required=FALSE [Area.024] Title=0205 Base Local=Scenery\0205 Layer=24 Active=TRUE Required=FALSE [Area.025] Title=0206 Base Local=Scenery\0206 Layer=25 Active=TRUE Required=FALSE [Area.026] Title=0207 Base Local=Scenery\0207 Layer=26 Active=TRUE Required=FALSE [Area.027] Title=0300 Base Local=Scenery\0300 Layer=27 Active=TRUE Required=FALSE [Area.028] Title=0301 Base Local=Scenery\0301 Layer=28 Active=TRUE Required=FALSE [Area.029] Title=0302 Base Local=Scenery\0302 Layer=29 Active=TRUE Required=FALSE [Area.030] Title=0303 Base Local=Scenery\0303 Layer=30 Active=TRUE Required=FALSE [Area.031] Title=0304 Base Local=Scenery\0304 Layer=31 Active=TRUE Required=FALSE [Area.032] Title=0305 Base Local=Scenery\0305 Layer=32 Active=TRUE Required=FALSE [Area.033] Title=0306 Base Local=Scenery\0306 Layer=33 Active=TRUE Required=FALSE [Area.034] Title=0307 Base Local=Scenery\0307 Layer=34 Active=TRUE Required=FALSE [Area.035] Title=0400 Base Local=Scenery\0400 Layer=35 Active=TRUE Required=FALSE [Area.036] Title=0401 Base Local=Scenery\0401 Layer=36 Active=TRUE Required=FALSE [Area.037] Title=0402 Base Local=Scenery\0402 Layer=37 Active=TRUE Required=FALSE [Area.038] Title=0403 Base Local=Scenery\0403 Layer=38 Active=TRUE Required=FALSE [Area.039] Title=0404 Base Local=Scenery\0404 Layer=39 Active=TRUE Required=FALSE [Area.040] Title=0405 Base Local=Scenery\0405 Layer=40 Active=TRUE Required=FALSE [Area.041] Title=0406 Base Local=Scenery\0406 Layer=41 Active=TRUE Required=FALSE [Area.042] Title=0407 Base Local=Scenery\0407 Layer=42 Active=TRUE Required=FALSE [Area.043] Title=0500 Base Local=Scenery\0500 Layer=43 Active=TRUE Required=FALSE [Area.044] Title=0501 Base Local=Scenery\0501 Layer=44 Active=TRUE Required=FALSE [Area.045] Title=0502 Base Local=Scenery\0502 Layer=45 Active=TRUE Required=FALSE [Area.046] Title=0503 Base Local=Scenery\0503 Layer=46 Active=TRUE Required=FALSE [Area.047] Title=0504 Base Local=Scenery\0504 Layer=47 Active=TRUE Required=FALSE [Area.048] Title=0505 Base Local=Scenery\0505 Layer=48 Active=TRUE Required=FALSE [Area.049] Title=0506 Base Local=Scenery\0506 Layer=49 Active=TRUE Required=FALSE [Area.050] Title=0507 Base Local=Scenery\0507 Layer=50 Active=TRUE Required=FALSE [Area.051] Title=0600 Base Local=Scenery\0600 Layer=51 Active=TRUE Required=FALSE [Area.052] Title=0601 Base Local=Scenery\0601 Layer=52 Active=TRUE Required=FALSE [Area.053] Title=0602 Base Local=Scenery\0602 Layer=53 Active=TRUE Required=FALSE [Area.054] Title=0603 Base Local=Scenery\0603 Layer=54 Active=TRUE Required=FALSE [Area.055] Title=0604 Base Local=Scenery\0604 Layer=55 Active=TRUE Required=FALSE [Area.056] Title=0605 Base Local=Scenery\0605 Layer=56 Active=TRUE Required=FALSE [Area.057] Title=0606 Base Local=Scenery\0606 Layer=57 Active=TRUE Required=FALSE [Area.058] Title=0607 Base Local=Scenery\0607 Layer=58 Active=TRUE Required=FALSE [Area.059] Title=0700 Base Local=Scenery\0700 Layer=59 Active=TRUE Required=FALSE [Area.060] Title=0701 Base Local=Scenery\0701 Layer=60 Active=TRUE Required=FALSE [Area.061] Title=0702 Base Local=Scenery\0702 Layer=61 Active=TRUE Required=FALSE [Area.062] Title=0703 Base Local=Scenery\0703 Layer=62 Active=TRUE Required=FALSE [Area.063] Title=0704 Base Local=Scenery\0704 Layer=63 Active=TRUE Required=FALSE [Area.064] Title=0705 Base Local=Scenery\0705 Layer=64 Active=TRUE Required=FALSE [Area.065] Title=0706 Base Local=Scenery\0706 Layer=65 Active=TRUE Required=FALSE [Area.066] Title=0707 Base Local=Scenery\0707 Layer=66 Active=TRUE Required=FALSE [Area.067] Title=0800 Base Local=Scenery\0800 Layer=67 Active=TRUE Required=FALSE [Area.068] Title=0801 Base Local=Scenery\0801 Layer=68 Active=TRUE Required=FALSE [Area.069] Title=0802 Base Local=Scenery\0802 Layer=69 Active=TRUE Required=FALSE [Area.070] Title=0803 Base Local=Scenery\0803 Layer=70 Active=TRUE Required=FALSE [Area.071] Title=0804 Base Local=Scenery\0804 Layer=71 Active=TRUE Required=FALSE [Area.072] Title=0805 Base Local=Scenery\0805 Layer=72 Active=TRUE Required=FALSE [Area.073] Title=0806 Base Local=Scenery\0806 Layer=73 Active=TRUE Required=FALSE [Area.074] Title=0807 Base Local=Scenery\0807 Layer=74 Active=TRUE Required=FALSE [Area.075] Title=0900 Base Local=Scenery\0900 Layer=75 Active=TRUE Required=FALSE [Area.076] Title=0901 Base Local=Scenery\0901 Layer=76 Active=TRUE Required=FALSE [Area.077] Title=0902 Base Local=Scenery\0902 Layer=77 Active=TRUE Required=FALSE [Area.078] Title=0903 Base Local=Scenery\0903 Layer=78 Active=TRUE Required=FALSE [Area.079] Title=0904 Base Local=Scenery\0904 Layer=79 Active=TRUE Required=FALSE [Area.080] Title=0905 Base Local=Scenery\0905 Layer=80 Active=TRUE Required=FALSE [Area.081] Title=0906 Base Local=Scenery\0906 Layer=81 Active=TRUE Required=FALSE [Area.082] Title=0907 Base Local=Scenery\0907 Layer=82 Active=TRUE Required=FALSE [Area.083] Title=1000 Base Local=Scenery\1000 Layer=83 Active=TRUE Required=FALSE [Area.084] Title=1001 Base Local=Scenery\1001 Layer=84 Active=TRUE Required=FALSE [Area.085] Title=1002 Base Local=Scenery\1002 Layer=85 Active=TRUE Required=FALSE [Area.086] Title=1003 Base Local=Scenery\1003 Layer=86 Active=TRUE Required=FALSE [Area.087] Title=1004 Base Local=Scenery\1004 Layer=87 Active=TRUE Required=FALSE [Area.088] Title=1005 Base Local=Scenery\1005 Layer=88 Active=TRUE Required=FALSE [Area.089] Title=1006 Base Local=Scenery\1006 Layer=89 Active=TRUE Required=FALSE [Area.090] Title=1007 Base Local=Scenery\1007 Layer=90 Active=TRUE Required=FALSE [Area.091] Title=1100 Base Local=Scenery\1100 Layer=91 Active=TRUE Required=FALSE [Area.092] Title=1101 Base Local=Scenery\1101 Layer=92 Active=TRUE Required=FALSE [Area.093] Title=1102 Base Local=Scenery\1102 Layer=93 Active=TRUE Required=FALSE [Area.094] Title=1103 Base Local=Scenery\1103 Layer=94 Active=TRUE Required=FALSE [Area.095] Title=1104 Base Local=Scenery\1104 Layer=95 Active=TRUE Required=FALSE [Area.096] Title=1105 Base Local=Scenery\1105 Layer=96 Active=TRUE Required=FALSE [Area.097] Title=1106 Base Local=Scenery\1106 Layer=97 Active=TRUE Required=FALSE [Area.098] Title=1107 Base Local=Scenery\1107 Layer=98 Active=TRUE Required=FALSE [Area.099] Title=Africa Local=Scenery\AFRI Layer=99 Active=TRUE Required=FALSE [Area.100] Title=Asia Local=Scenery\ASIA Layer=100 Active=TRUE Required=FALSE [Area.101] Title=Australia Local=Scenery\AUST Layer=101 Active=TRUE Required=FALSE [Area.102] Title=Eastern Europe Local=Scenery\EURE Layer=102 Active=TRUE Required=FALSE [Area.103] Title=Western Europe Local=Scenery\EURW Layer=103 Active=TRUE Required=FALSE [Area.104] Title=Central North America Local=Scenery\NAMC Layer=104 Active=TRUE Required=FALSE [Area.105] Title=Eastern North America Local=Scenery\NAME Layer=105 Active=TRUE Required=FALSE [Area.106] Title=Western North America Local=Scenery\NAMW Layer=106 Active=TRUE Required=FALSE [Area.107] Title=Oceania Local=Scenery\OCEN Layer=107 Active=TRUE Required=FALSE [Area.108] Title=South America Local=Scenery\SAME Layer=108 Active=TRUE Required=FALSE [Area.109] Title=Oshkosh Aerial Photo Local=Scenery\Cities\Oshkosh Layer=109 Active=TRUE Required=FALSE [Area.110] Title=St. Maarten Local=Scenery\Cities\StMaarten Layer=110 Active=TRUE Required=FALSE [Area.111] Title=Rio de Janeiro Local=Scenery\Cities\Rio Layer=111 Active=TRUE Required=FALSE [Area.112] Title=Las Vegas Local=Scenery\Cities\LasVegas Layer=112 Active=TRUE Required=FALSE [Area.113] Title=Global, Generic & Vehicle Libraries Local=Scenery\Global Layer=113 Active=TRUE Required=TRUE [Area.114] Title=Propeller Objects Local=Scenery\Props Layer=114 Active=TRUE Required=TRUE [Area.115] Title=Addon Scenery Local=Addon Scenery Layer=122 Active=TRUE Required=FALSE [Area.116] Title=Runway Number Update Local=RWNumberUpdateSubs Layer=115 Active=TRUE Required=FALSE [Area.117] Title=ORBX!OPENLC_BASE Local=ORBX\FTX_OLC\OLC_AA Layer=116 Active=TRUE Required=FALSE [Area.118] Title=ORBX!OPENLC_NAMERICA1 Local=ORBX\FTX_OLC\OLC_NA1 Layer=117 Active=TRUE Required=FALSE [Area.119] Title=ORBX!OPENLC_EUROPE1 Local=ORBX\FTX_OLC\OLC_EU1 Layer=118 Active=TRUE Required=FALSE [Area.120] Title=MyTraffic Local=MyTraffic Layer=119 Active=TRUE Required=FALSE [Area.121] Title=FSDreamTeam New York JFK V2 Local=FsDreamTeam\KJFK Layer=120 Active=TRUE Required=FALSE [Area.122] Title=FTXAA_ORBXLIBS Local=ORBX\FTX_AU\FTXAA_ORBXLIBS Layer=121 Active=TRUE Required=FALSE Thank You Steven Pow
May 21, 201412 yr Your problem is your MyTraffic folder, that is suppose to go between Propeller Objects and Addon Scenery so move My Traffic between those two. In the MyTraffic\Scenery folder is an airport for KCLT that is based off the FSX stock airport and it only has two runways. Since in your scenery.cfg MyTraffic was at a higher priority than Addon Scenery the My Traffic KCLT airport was showing instead of Ray's KCLT. In an earlier post you said that you had moved your Addon Scenery folder, did you move it back to where it is above Propeller Objects in your above post or is it still where you moved it? If it is still where you moved it you need to move it back. After everything is moved you want: [Area.114]Title=Propeller ObjectsLocal=Scenery\PropsLayer=114Active=TRUERequired=TRUE [Area.115]Title=MyTrafficLocal=MyTrafficLayer=115Active=TRUERequired=FALSE [Area.116]Title=Addon SceneryLocal=Addon SceneryLayer=116Active=TRUERequired=FALSE Your FSDT JFK needs to be first so move it above your FTXAA_ORBXLIBS After you get everything moved in the FSX Scenery Library install and run this so it will renumber everything correctly. Click on the link to download it. uploads/12417/FSTscenery.zip Unzip the folder you download and then put this in the same folder your scenery.cfg is in. Double click on the FSTScenery.exe file and let it run. Any messages that popup just click ok. It is just telling you that something was out of sequence and that is what you are fixing. Always make a backup of your scenery.cfg and move to a safe place just in case. I use FSTscenery all the time and never had a problem, but better safe than sorry. As stated in past posts Ray's KCLT has the wrong ILS for 36L so you need to delete all of his bgl's in Addon Scenery\Scenery and Scenery\Global\Scenery. Make sure that you delete all of Ray's bgl's that you installed. Then install Allen's KCLT from the link I posted above. Moving forward, keep in mind that any airports you add to Addon Scenery will be overwritten by any airports you install later that are at a higher priority, that is why I made a folder call Addon AP Scenery so I can keep my airports I install above all the other stuff I installed like UTX, SceneryTech, MSE, ect.
May 21, 201412 yr I forgot to add, before you run FSTScenery shut FSX completely down and then run FSTScenery. Do not run FSTScenery while FSX is running.
Create an account or sign in to comment