September 20, 201510 yr I have a smal Problem ! When i say preflight checklist please - the FO always say- let me finish my preflight procedure please- (EU Soundset) What do i make wrong.......... Frank from EDDM WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 21, 201510 yr Commercial Member Let him finish his main pre-flight procedure... You're running the Pre Flight events obviously. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
September 21, 201510 yr Author Hi Bryan, the problem is I can not work through this checklist.(preflight checklist) it will be skipped or will not workso long can not wait to. always let me finish my preflight procedure please up to every procedure It usually goes on with the before start procedure.With the button controll it works. Frank WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 21, 201510 yr Commercial Member Hi Frank, Why can't you do the checklist? Which SOP set are you using? Remember in voice if you ever get stuck on a checklist item, just say "SET AND CHECKED". B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
September 21, 201510 yr Author Hi Briyan, i use SOP2. it is not easy to write the problem in englisch for me. Every time i speek preflight checklist please the FO says let me finisch my preflight checklist please. Is there a problem in the settings ........is there something to do in the cockpit The crew works good only the smal problem. It works for me without the preflight checklist. Frank from EDDM WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 21, 201510 yr When you request 'Preflight check list please', what does the FS2Crew status bar say? It should say Pre Flight Checklist, I believe in white letters, to indicate that the FO has finished the pre-flight procedures. If it is <Pre Flight Procedures> in orange-ish font, it means the FO isn't ready yet. (I can't remember, but doesn't the FO say at some point, "I'm ready for the checklist"?) Are you saying that no matter how long you wait, the FO never completes the pre-flight proceduers? Scott Urista If you think it's expensive to hire a professional to do the job, wait until you hire an amateur.
September 21, 201510 yr Author Hi Scott, thanks for help. "(I can't remember, but doesn't the FO say at some point, "I'm ready for the checklist"?)" i do not find this in the fs2crew Manual SOP2 "Are you saying that no matter how long you wait, the FO never completes the pre-flight proceduers?" Yes he never finished the procedure. He speak allways let me finish my preflight procedure please At 6 minutes start the before Start procedure in ORANGE and i can work normal. Frank WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 22, 201510 yr Commercial Member 1. Run the Pre-Flight events. 2. Don't fast forwarding the time down. 3. Around +6 minutes ask for the Pre Flight Checklist. What's the FO say? B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
September 22, 201510 yr Author Hi Bryan, 1. I never make a fast forwarding. 2. At round about 6 Minutes i can not say "preflight Checklist please" thre is no command back from my FO. Frank WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 22, 201510 yr Commercial Member At round about 6 Minutes i can not say "preflight Checklist please" thre is no command back from my FO. Do you see that phrase in the Green Bar? If not, try adjusting the way you say it. Did you run the voice training? B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
September 22, 201510 yr Author Hi Bryan, i see the phrase in the green bar. The Voice training is not working for me in my German Win 7 64. All commands are working well......................... Mayby it works in the new Update 1.1 Thanks Frank WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 22, 201510 yr Commercial Member The Voice training is not working for me in my German Win 7 64. I would upgrade to Windows 10. It's free and better than Win 7. Maybe you're using Vistalizator? With Win 10, everyone can download the English US language pack, which is a lot better than using Vistalizator. Version 1.1 won't change anything since I can't reproduce this and no one else has said anything. Are you sure you have SOP 2 selected and it says SOP2 in the display and you're following the tutorial to the letter? B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
September 23, 201510 yr Author Hi Bryan, i have a smal update. In my FS2Crew Config-Misc(1) sektion i changed some setting. My old settings: FO PRELIM PROC: NO FO PREFLIGHT PROC: NO PREFLIGHT SUP PROC:NO I change FO PRELIM PROC: To YES FO PREFLIGHT PROC To YES After this change all are working. I do not why it work when i say YES: What is SP PROC - must i say YES or NO Thanks Frank from EDDM WIN 11 64 Pro, Gigabyte Z790 Aorus Elite AX, I7 13700K, be-quiet Loop Silent 2 WK, RTX 4080 S, 64 GB DDR5 Kingston Fury Beast EXPO, 4x Nvme Samsung PRO, MS2024, be quiet SP11 850 Watt
September 23, 201510 yr Commercial Member Glad you got it sorted. That makes sense because you disabled the FO's Pre Flight procedure. Cheers, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
Create an account or sign in to comment