Jump to content

Sign in to follow this  
iamlmc

Aerosoft - Catalina X (KAVX)

Recommended Posts

I have some elevation problems (starting bellow the runway) at Aerosoft KAVX airport. I'm runing P3D v3.2 + Global + Vector + Pilots FTX 2010 Mesh  + LC EU + LC NA. Does anyone have a solution/workaround? I used  the Orbx AEC tool with no avail.

 

Outside View

 

2it3i91.jpg

 

Top-Down View

 

2yn2zvn.jpg


Best regards, Luís

 

SYSTEM (build date 2013): Case: Corsair Obsidian 650D  |  Motherboard: Asus Sabertooth Z87  |  CPU: Intel® Core™ i7-4770K Processor @ 4.4 GHz  |  RAM: 16 Gb Kingston HyperX KHX2133C11D3/4GX @ 1867 MHz  |  Optical drives: 2x ASUS BW-12B1ST  |  SSD's: 2x Samsung SSD 840 PRO Series 250 Mb @ RAID 0  |  Cooler: Corsair H80i | PSU: Corsair AX860i | GPU's: 2x Nvidia Geforce GTX 780 (MSI & EVGA) reference cards with tweaked firmware | Microsoft Windows 10 x64 Pro | Prepar3D Academic v3.4.22.19868

 

CONTROLLERS: Saitek Pro Flight™ Multi Panel | Saitek Pro Flight™ Radio Panel | Saitek Pro Flight™ Switch Panel | 1x Saitek Pro Flight™ Instrument Panel | TrackIR 5 with TrackClip Pro | CH Flight Sim Yoke | CH Pro Pedals | CH Throttle Quadrant | Thrustmaster HOTAS Warthog™ | Thrustmaster MFD Cougar Pack                                                                                                                                                                                                                                                                                                                                                                                                     

Share this post


Link to post

 

 


Does anyone have a solution/workaround? I used the Orbx AEC tool with no avail.

I tried the same not 2 days ago without success, i`m running Orbx Socal and no amount of disabling bgl`s, vector tool or scenery order would fix it, even the compatibility fix on the Orbx forums failed to cure the sunken rwy for met, i ended up buying this stunning rendition which is fully compatible with Orbx. the Developer used to work with Orbx and i`m impressed with it.

 

https://flight.sim720.co.uk/products_catalina.php


Banner_FS2Crew_Supporter.jpg

d2dp9p.png

Rick Wilson

 

 

Share this post


Link to post

I tried the same not 2 days ago without success, i`m running Orbx Socal and no amount of disabling bgl`s, vector tool or scenery order would fix it, even the compatibility fix on the Orbx forums failed to cure the sunken rwy for met, i ended up buying this stunning rendition which is fully compatible with Orbx. the Developer used to work with Orbx and i`m impressed with it.

 

https://flight.sim720.co.uk/products_catalina.php

 

Thanks for the feedback.

 

I am interested in Orbx sales and in particular Soca and Noca. Do you have a beefy  machine?

 

I fly a lot above Cali with the Aerosoft buses I have FSDT KLAX, FB KSFO HD, FSDT KLAS and LatinVFR KSAN among with the Orbx pack (Global + Vector + Pilots FTX 2010 Mesh  + LC EU + LC NA) in some situations I am pushed to the 20 FPS zone with very mild settings. (Win 10 Pro x64 | i7 4770K @ 4.4Ghz | 2x reference GXT 780 (non Ti) in SLI | 16 Gb of RAM).

 

Do you fly tube liners? How is the performance within those FTX Regions?

 

Cheers,

Luís

 

PS: BTW, can you point me for the Orbx compatibility fix... Been searching for that with no avail.

Edited by AlienKarma

Best regards, Luís

 

SYSTEM (build date 2013): Case: Corsair Obsidian 650D  |  Motherboard: Asus Sabertooth Z87  |  CPU: Intel® Core™ i7-4770K Processor @ 4.4 GHz  |  RAM: 16 Gb Kingston HyperX KHX2133C11D3/4GX @ 1867 MHz  |  Optical drives: 2x ASUS BW-12B1ST  |  SSD's: 2x Samsung SSD 840 PRO Series 250 Mb @ RAID 0  |  Cooler: Corsair H80i | PSU: Corsair AX860i | GPU's: 2x Nvidia Geforce GTX 780 (MSI & EVGA) reference cards with tweaked firmware | Microsoft Windows 10 x64 Pro | Prepar3D Academic v3.4.22.19868

 

CONTROLLERS: Saitek Pro Flight™ Multi Panel | Saitek Pro Flight™ Radio Panel | Saitek Pro Flight™ Switch Panel | 1x Saitek Pro Flight™ Instrument Panel | TrackIR 5 with TrackClip Pro | CH Flight Sim Yoke | CH Pro Pedals | CH Throttle Quadrant | Thrustmaster HOTAS Warthog™ | Thrustmaster MFD Cougar Pack                                                                                                                                                                                                                                                                                                                                                                                                     

Share this post


Link to post

Check that any add on traffic programs do not have a specific BGL for KAVX. If so, disable it and see if that helps.

 

Vic


 

P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 2080ti 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

Check that any add on traffic programs do not have a specific BGL for KAVX. If so, disable it and see if that helps.

 

Vic

 

The only related files I have are AF2_KAVX.bgl (C:\Games\Prepar3D v3\aerosoft\USCitiesX-LosAngeles-DEMO\Scenery) from the scenery itself and ABP_KAVX.bgl (C:\Games\Prepar3D v3\ORBX\FTX_VECTOR\FTX_VECTOR_APT\scenery) from vector. I have run the AEC tool but I guess one could try to put that bgl to .off...

 

Thanks Vic,

Luís

 

Edit: Unfortunately I didn't worked.

Edited by AlienKarma

Best regards, Luís

 

SYSTEM (build date 2013): Case: Corsair Obsidian 650D  |  Motherboard: Asus Sabertooth Z87  |  CPU: Intel® Core™ i7-4770K Processor @ 4.4 GHz  |  RAM: 16 Gb Kingston HyperX KHX2133C11D3/4GX @ 1867 MHz  |  Optical drives: 2x ASUS BW-12B1ST  |  SSD's: 2x Samsung SSD 840 PRO Series 250 Mb @ RAID 0  |  Cooler: Corsair H80i | PSU: Corsair AX860i | GPU's: 2x Nvidia Geforce GTX 780 (MSI & EVGA) reference cards with tweaked firmware | Microsoft Windows 10 x64 Pro | Prepar3D Academic v3.4.22.19868

 

CONTROLLERS: Saitek Pro Flight™ Multi Panel | Saitek Pro Flight™ Radio Panel | Saitek Pro Flight™ Switch Panel | 1x Saitek Pro Flight™ Instrument Panel | TrackIR 5 with TrackClip Pro | CH Flight Sim Yoke | CH Pro Pedals | CH Throttle Quadrant | Thrustmaster HOTAS Warthog™ | Thrustmaster MFD Cougar Pack                                                                                                                                                                                                                                                                                                                                                                                                     

Share this post


Link to post

And you're not running MyTraffic or WOAI or UT2 ?  You might try moving the KAVX entry up in the scenery library. Typically specific airport sceneries should be loaded last ( top of scenery library) so they layer over other possible conflicts.

 

 

Vic


 

P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 2080ti 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

 

 


I am interested in Orbx sales and in particular Soca and Noca. Do you have a beefy machine?

Much the same as your computer, click the CPU-Z banner in my signature.

 

 

 


Do you fly tube liners? How is the performance within those FTX Regions?

PMDG NGX, Aerosoft Buses, and my performance depends on the weather mostly, if it`s cloudy then i get 18-25 fps.

 

 

 


BTW, can you point me for the Orbx compatibility fix... Been searching for that with no avail.

It`s in the Orbx forum under support/ftx compatibility section.


Banner_FS2Crew_Supporter.jpg

d2dp9p.png

Rick Wilson

 

 

Share this post


Link to post

And you're not running MyTraffic or WOAI or UT2 ?  You might try moving the KAVX entry up in the scenery library. Typically specific airport sceneries should be loaded last ( top of scenery library) so they layer over other possible conflicts.

 

 

Vic

 

I will give it a try. I am running MyTraffic 6.0a and KAVX is above it. I was not able to find any KAVX file in the MyTraffic folder.

 

Much the same as your computer, click the CPU-Z banner in my signature.

 

 

 

PMDG NGX, Aerosoft Buses, and my performance depends on the weather mostly, if it`s cloudy then i get 18-25 fps.

 

 

 

It`s in the Orbx forum under support/ftx compatibility section.

 

Dang how the heck I missed you signature... Been over at Orbx forum for the second time and was unable to found the thread/post regarding KVAX. Regarding specs, my 2x 780 must suck against your 980Ti.


Best regards, Luís

 

SYSTEM (build date 2013): Case: Corsair Obsidian 650D  |  Motherboard: Asus Sabertooth Z87  |  CPU: Intel® Core™ i7-4770K Processor @ 4.4 GHz  |  RAM: 16 Gb Kingston HyperX KHX2133C11D3/4GX @ 1867 MHz  |  Optical drives: 2x ASUS BW-12B1ST  |  SSD's: 2x Samsung SSD 840 PRO Series 250 Mb @ RAID 0  |  Cooler: Corsair H80i | PSU: Corsair AX860i | GPU's: 2x Nvidia Geforce GTX 780 (MSI & EVGA) reference cards with tweaked firmware | Microsoft Windows 10 x64 Pro | Prepar3D Academic v3.4.22.19868

 

CONTROLLERS: Saitek Pro Flight™ Multi Panel | Saitek Pro Flight™ Radio Panel | Saitek Pro Flight™ Switch Panel | 1x Saitek Pro Flight™ Instrument Panel | TrackIR 5 with TrackClip Pro | CH Flight Sim Yoke | CH Pro Pedals | CH Throttle Quadrant | Thrustmaster HOTAS Warthog™ | Thrustmaster MFD Cougar Pack                                                                                                                                                                                                                                                                                                                                                                                                     

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  
×
×
  • Create New...