February 13, 20188 yr Having loaded up the default flight all was okay. Upon closing P3D and restarting it with the PMDG 747 at FlightBeams KSFO, the sim will just shut down. It doesn't happen at KSFO, it happens at several other airfields as well. The issue is, that nothing shows up in Event Viewer, okay I did get KERNAL Base errors to begin with, but I have since fixed those issues - however the ongoing issue is being unable to load up the PMDG 747. The 777 works perfectly fine. I have uninstalled and reinstalled the 747 without any fix. I am scratching my head...
February 13, 20188 yr If you're getting kernel errors, it sounds like something is borked in your operating system. Before you get too far down the road of a buildup on P3D v4.2, you might want to reconsider rebuillding your OS platform first. And do that with your PC running at stock speeds...no overclocking during installs to avoid risking corruption that can bite you later. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
February 13, 20188 yr Author 1 minute ago, w6kd said: If you're getting kernel errors, it sounds like something is borked in your operating system. Before you get too far down the road of a buildup on P3D v4.2, you might want to reconsider rebuillding your OS platform first. And do that with your PC running at stock speeds...no overclocking during installs to avoid risking corruption that can bite you later. Regards As I said, I sorted the Kernel Base error issue. Windows update and a couple driver updates fixed the issue.
February 14, 20188 yr 30 minutes ago, shamrockflyer said: As I said, I sorted the Kernel Base error issue. Windows update and a couple driver updates fixed the issue. Any time I have serious hardware or OS issues, I am always on the edge of my seat wondering if it corrupted my system, or was caused by something already corrupted in the system. So my advice still stands...once I see something like blue screens or serious OS faults (like kernel errors), I am suspicious. I generally start with a couple passes of Memtest86+ to make sure I don't have a RAM module going bad (have had that happen more than a couple times in 25 years of simming) and then if I see any other anomalous unexplained behaviour (like a quality add-on shutting down for no apparent reason) then I go ugly early and rebuild from the foundation up. Your call, of course, but it seems to me there's ample reason to be a bit distrustful of your system stability as it stands right now. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
February 14, 20188 yr Author I have noticed upon further examination of the Event Viewer that the vss service is shutting down due to idle timeout. Could that have anything to do with the sim crashing as soon as I load the 747? I have run SFC and it has found no integrity violations.
February 14, 20188 yr Moderator You might want to take this to he PMDG Forum. Vic RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
Archived
This topic is now archived and is closed to further replies.