January 10, 20197 yr I just got the Odyssey+ here in Germany and have a problem using it with P3. I upgraded all drivers butt I cannot see any VR tap in the P3 menu. I would very much appreciate any help with this. Thanks so much, Bernd Bernd Jablonka I9 - 10900K, RTX 2080 ti, 2x 1tb SSD M2 NVMe, 3 tb SATA 3, 32gb DDR4, Asus Prime Z490-P Mainboard, Honeycomb Alpha Yoke and Bravo Throttle
January 10, 20197 yr Did you download and install SteamVR? You need SteamVR to use WMR headset in Prepar3D. In Prepar3D once you start the scenario and press the ALT key. "Virtual Reality" should be an menu option. When you click on it a drop down should appear with a number of options like enable VR, Recalibrate Origin, setting, etc. You do all of this on your monitor before you put head set on. Edited January 10, 20197 yr by Guest
January 10, 20197 yr Author Thank you so much, I appreciate your comment. However, when I press the ALT key VR does not appear. I do not know what the solution is. Thanks Bernd Bernd Jablonka I9 - 10900K, RTX 2080 ti, 2x 1tb SSD M2 NVMe, 3 tb SATA 3, 32gb DDR4, Asus Prime Z490-P Mainboard, Honeycomb Alpha Yoke and Bravo Throttle
January 10, 20197 yr I've seen that before! But I don't remember the solution. Here are google search results: https://www.google.com/search?q=No+VR+in+Prepar3D+V4+menu+site:prepar3d.com&client=firefox-b&sa=X&ved=2ahUKEwi8peuY9-PfAhVH1IMKHWBrDB4QrQIoBDABegQIABAL&biw=1440&bih=708
January 10, 20197 yr Author Thank you but I already went through this before, no luck. Best Bernd Bernd Jablonka I9 - 10900K, RTX 2080 ti, 2x 1tb SSD M2 NVMe, 3 tb SATA 3, 32gb DDR4, Asus Prime Z490-P Mainboard, Honeycomb Alpha Yoke and Bravo Throttle
January 10, 20197 yr 15 minutes ago, bjablonka8120 said: Thank you but I already went through this before, no luck. Just to be clear, did you now install SteamVR? I've had the same issue and it won't show up when you don't have SteamVR installed. Edit: It's not enough to install Steam only. When Steam is installed, you still need to download and install SteamVR within Steam. Edited January 10, 20197 yr by threegreen
January 10, 20197 yr I had a WMR set over christmas from my son and lost the VR menu at a point, too. My bad was, I had tried the Flyinside plugin which seems to change the menu structure. Uninstalling it seemingly doesn't restore the original structure. Uninstalling and reinstalling the Prepar3d client (according to a suggestion by someone) did cure the situation for me. Kind regards, Michael Intel i7-13700K / AsRock Z790 / Crucial 32 GB DDR 5 / ASUS RTX 4080OC 16GB / BeQuiet ATX 1000W / WD m.2 NVMe 2TB (System) / WD m.2 NVMe 4 TB (MSFS) / WD HDD 10 TB / XTOP+Saitek hardware panel / LG 34UM95 3440 x 1440 / HP Reverb 1 (2160x2160 per eye) / Win 11
January 11, 20197 yr Author I did install Steam VR, thanks. Michael, I did what you suggested and it worked. I also had Flyinside installed and that was the problem. Thank you so much for figuring this out. Much appreciated. Best Bernd Bernd Jablonka I9 - 10900K, RTX 2080 ti, 2x 1tb SSD M2 NVMe, 3 tb SATA 3, 32gb DDR4, Asus Prime Z490-P Mainboard, Honeycomb Alpha Yoke and Bravo Throttle
Archived
This topic is now archived and is closed to further replies.