After  installing  Beta  2  after  doing  my  flight  control checks my  fo  wont  do  his,  I have  to  by pass  this  step.(using  voice)  previously  had  no  issues  till now.   

Edited August 2, 20196 yr by pete_auau

Are you 100 percent sure you completed the Rudder check all the way?

I suspect you just missed the triggers.

Please try again.

15 hours ago, byork said:

Are you 100 percent sure you completed the Rudder check all the way?

I suspect you just missed the triggers.

Please try again.

Before I  got  stuck   on the  rudder   than I use the  phase taxi procedure please  than  the  fo  would  do  his   checks  on the  first release  of   fs2crew  but  not  now on beta2   but  will  try  again.

Edit    found  that using  my  throttle   rudder  assignments   has  solved the  issues,  found  that using  my  joystick   twist   function  wasn't   actually  moving the  rudder  fully  right

Edited August 3, 20196 yr by pete_auau

Glad you got it sorted 🙂 I knew it was a joystick calibration issue.

 

I am experiencing a similiar issue since the open beta. The FO finishes his flight control check, but the control panel the mode keeps flashing "PM flight control check". 
I am not able to skip this.

Double check your Config Settings that pertain to the Taxi phase.

 

Which setting exactly do you refer to which should pertain the taxi phase?

7 hours ago, Rampi said:

Which setting exactly do you refer to which should pertain the taxi phase?

Ensure "AUTO PM TAXI FLOW" is set to YES.

And download V1.1 Final from your FS2Crew account pls.

Cheers,

 

V1.1 Final fixed it, thank you!

Glad it's sorted!