Speech recognition problem

[byork 2,259]

8 hours ago, MAERSK said:

Salut manuel

Bon nouveau merci pour votre travail Je sais que la tâche ne doit pas être facile, que devons-nous faire maintenant? Désinstallez et téléchargez à nouveau UGCX via notre compte Fs2Crew? Merci encore à toute l'équipe.

 

V1.1 has not been released yet to the public.  So do not uninstall yet.

We will give everyone instructions when ready.

 

[MAERSK 0]

Hi Bryan,

Thanks for the information no worries we will wait 👍😏.

[Bill Bray 1]

I have been using Version 1.0 &1.2 without a problem but now I can not get voice recognition to work in version 1.3 (Clean install) with default aircraft, scenery, US recognition, US Voice.

The Message "Windows Speech Recognition is not available for your language".

(My Region is Australia)

 

[Manuel82 147]

Hey Bill,

Try posting your UGCX.ini file's content to analyze it.

And, what's your window's speech recognition's engine language setup?

Cheers,

Edited October 14, 2019 by Manuel82

[Bill Bray 1]

2 hours ago, Manuel82 said:

Hey Bill,

Try posting your UGCX.ini file's content to analyze it.

And, what's your window's speech recognition's engine language setup?

Cheers,

US English recognition - US Voice in UGCX to test.

[UGCX]
RegionalSoundPack=1
XSignAfterTugStops=1
UsePMDGBrakingMethod=1
LimitSCUpdates=0
DisableTowPlaneCmds=0
DispRecogPhrases=1
UseFacingWord=1
FireTruckFoam=1
GoIntoTugAftPb=1
Interface=1
PMDGBrakingInterval=1
BGLFileSizeLimit=5
AudioDevice=2
ZoomRateViewNodesTxt=10
UseMapForSelectPrk=1
DoNotShowAgain=0
CaptVoiceOn=0
LanguageID=409
Volume=2
LogScenRdrDetails=0
ShowRampAgents=1
ShowWingWalkers=1
SoundPack=US
FastPacePB=0
AutoDetectSRLang=0
SuppressHardSoftMutes=0
AdvBarOn=1
Data1=1
Data2=4
Data3=0
Data4=5
Data5=3
Data6=1

[Seasons]
Winter=-100;5
Spring=5;20
Summer=20;100

 

 

[Manuel82 147]

Hey Bill,

Your UGCX ini file seems OK

Can you go to your Window's "Control Panel", then "Ease of Access Center", then "Speech Recognition", then "Advanced Speech Options", then take a screen of the dialogbox that appears.

Also can you post your UGCX log file?

[byork 2,259]

If your Windows speech recognizer is set to ENGLISH - US, ensure you select ENGLISH US in UGCX, not Australia.

 

[Bill Bray 1]

18 minutes ago, byork said:

If your Windows speech recognizer is set to ENGLISH - US, ensure you select ENGLISH US in UGCX, not Australia.

 

"Speech Recognition Languages"

"1 - English United States" (Selected)

-------------

Speech Recognition - "Microsoft Speech Recognizer 8.0 for Windows (English- US)

"Default Speech Profile" TICK

NO other ticks.

----------------------------------------------------------------------------

------------------------ INITIALIZATING FS MODULE ------------------------
            It's a supported Flight Simulator:        [11]...
            Hooking to the Flight Simulator's MAIN window procedure...
            Registering CUSTOM windows messages...
            Reading the INITIALIZATION file...
            Getting the FSX.CFG or PREPAR3D.CFG file path...
            Reading settings from the FSX.CFG or PREPAR3D.CFG file located here:
            C:\Users\billo\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg
            The Flight Simulator's frame rate LIMIT is 0 fps...
            Creating our timer...
            Current language ID:    [409]    
            Current sound pack:         US        
            Retrieving UGCX module's version...
            Running UGCX module's version: Version: 1.3.0.0
            Attempting to connect to the Flight Simulator...
            CONNECTED! to Flight Simulator...
            Mapping Flight Simulator's events...
            Setting up data definitions...
            Initializating scenery reader system...
            Verifying the Flight Simulator's SCENERY configuration...
            Reading the SCENERY.CFG file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg  
            Reading the SCENERY_ADD-ONS.XML file, located in:
            C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml  
            Unloading the scenery index from memory...
            Updating the INITIALIZATION file...
            Creating aircraft's profile FONT...
            Module's initialization sequence COMPLETED!
-------------------------------------------------------------------------------
--------------------------- AIRCRAFT LOADED ---------------------------
            Aircraft.cfg file path: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado Commander 114\aircraft.cfg
            Aircraft's Model Name: AC11 Commander 114 - Orange
-------------------------------------------------------------------------------
----------------------- UGCX API -----------------------
        Registering API variables...
----------------------- LOADING LANGUAGE AND SOUND PACK -----------------------
        Loading CURRENT Language and Sound Pack...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
        UGCX    - CURRENT language's ID:    [409]    
        UGCX    - CURRENT sound pack:         US        
        WINDOWS - CURRENT language's ID:    0x0409    
        UGCX    - CURRENT language's Name:    [English – United States]    
        Reading all WORDS, PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file...
        Reading the REGIONAL sound packs INITIALIZATION file...
        Loading the language's DEFAULT sounds pack...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        C:\Program Files\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs
                        C:\Program Files\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb
                        C:\Program Files\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Starting the speech recognition's engine...
                Starting the voice recognition's engine...
                Language ID: 409...
                Creating the ISpRecognizer object...
                Creating the ISpRecoContext object...
                Defining the SR notification callback...
                Setting SR event types...
                Creating the ISpAudio object...
                Setting the input stream for the SR...
                Activating the SR engine...
                Creating the ISpRecoGrammar object...
                Loading the specified CFG grammar file...
                Activating the rule ID: 1...
                An ERROR! ocurred, in the SR engine, error code: 0x88890008 ...
        Stopping the voice recognition's engine...
        The voice recognition's engine has been STOPPED...
        ERROR!, While trying to START the speech recognition's engine. Error code: 0x88890008    
        ERROR!, Couldn't start the speech recognition's engine for the CURRENT language's ID:    [409]    
        Total number of attempts made: 0
        ERROR!, There is *NOT ANY* speech recognition engine available for *ANY* UGCX supported languages...
----------------------- LOADING SCENERY AND GRAMMAR -----------------------
        Creating and executing the WORKER thread...
        Starting the WORKER thread...
        Loading and updating the scenery cache's data...
        Searching for the NEAREST airport...
        The NEAREST airport's ID:        YSBK
        Located at the Region's ID:        
        The NEAREST airport's BGL file's path is:
        C:\Program Files\Lockheed Martin\Prepar3D v4\Addon Scenery\OZx YSBK Bankstown v1\OZx YSBK Bankstown Airport\scenery\rf_YSBK_ADE.bgl
        Searching for the CURRENT parking's information...
        Unloading scenery index...
        Triggering CUSTOM event...
        Loading the sound pack based on the CURRENT region and language: [AU]...
                Loading CURRENT sounds set...
                Attempting to load the following sound pack files:
                        C:\Program Files\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\AU.xgs
                        C:\Program Files\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\AU.xwb
                        C:\Program Files\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\AU.xsb
                Sounds set LOADED SUCCESSFULLY!...
                Creating and initializating the stream...
                Setting the master volume...
        Loading process has been COMPLETED!
-------------------------------------------------------------------------------
------------------------ SIMULATION STARTED ------------------------
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- AIRCRAFT LOADED ---------------------------
            Aircraft.cfg file path: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado Commander 114\aircraft.cfg
            Aircraft's Model Name: AC11 Commander 114 - Orange
-------------------------------------------------------------------------------
------------------------ SIMULATION STOPPED ------------------------
        Stopping Text-To-Speech...
        Text-To-Speech has been STOPPED...
------------------------ SIMULATION STARTED ------------------------
            Adding our module's entry to the ADDONS menu entry...
        Starting the Text-To-Speech engine...
                Text-To-Speech has been STARTED...
--------------------------- AIRCRAFT LOADED ---------------------------
            Aircraft.cfg file path: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado Commander 114\aircraft.cfg
            Aircraft's Model Name: AC11 Commander 114 - Orange
-------------------------------------------------------------------------------
        Requested Ground Service: PUSHBACK [or] ENGINE STARTUP SEQUENCE...
        Current airport's ICAO ID: [YSBK]
        Current airport's BGL file's path:
        C:\Program Files\Lockheed Martin\Prepar3D v4\Addon Scenery\OZx YSBK Bankstown v1\OZx YSBK Bankstown Airport\scenery\rf_YSBK_ADE.bgl
        Current Gate's (or parking's) ID: [Parking 1]
        USER's aircraft model name: [AC11 Commander 114 - Orange]
        USER's aircraft CURRENT location:
            +-> Latitude:        -33.91949167  degrees    
            +-> Longitude:        150.99034167  degrees    
            +-> Altitude:        9.996  meters    
            +-> True Heading:    331.671  degrees    
        A RAMP AGENT has been CREATED in the simulation. It's index number is: [0]

 

 

[Manuel82 147]

Hey Bill,

Sorry by the delay, has been researching about this error, but found little information about it. However, I think something went wrong with the 409.cfg file, can you take a screenshot of the folder:

C:\Users\billo\AppData\Roaming\Ultimate Ground Crew X\Language

I would like to see if the 409.cfg is present and if it matches the one we have, because, seems like its broken or something.

Cheers,

Manuel

[Bill Bray 1]

On 10/17/2019 at 10:07 AM, Manuel82 said:

Hey Bill,

Sorry by the delay, has been researching about this error, but found little information about it. However, I think something went wrong with the 409.cfg file, can you take a screenshot of the folder:

C:\Users\billo\AppData\Roaming\Ultimate Ground Crew X\Language

I would like to see if the 409.cfg is present and if it matches the one we have, because, seems like its broken or something.

Cheers,

Manuel

I don't know what happened to my post the other day but my 409.cfg is dated 21/09/2019 9:32 pm

Do you think I should just get a support ticket & work from there?

Bill

 

[byork 2,259]

1 hour ago, Bill Bray said:

I don't know what happened to my post the other day but my 409.cfg is dated 21/09/2019 9:32 pm

Do you think I should just get a support ticket & work from there?

Bill

 

Send me a support ticket.  I'll help you via  Remote Desktop.

[byork 2,259]

User fixed the problem himself.

This is how:

Quote

 

  https://www.youtube.com/watch?v=ryQ97Sq7F3c

I simply ran ctfmon.exe from CMD & it worked, so I added it to the Start, Run via Regedit, Re-Booted three times & everything still worked.

I built my first computer 40 years ago this year & this had me beat.