April 23, 20206 yr Since some time (cannot tell when this problem started) I have to adjust my sound sliders like that. Only then I'm able to hear the ATC voice. What's the problem here? Doesn't matter which plane I load. Engine: 2 Cockpit: 5 Environment: 5 Voice: 100 https://www.dropbox.com/s/1o47vyegnl3tgip/Sound.png?dl=0 Thx, Karl i9-9900K@5,0 | 32GB 3200 | 2080TI | 4K 55" | MSFS | P3D V5
April 23, 20206 yr I also have this problem. The ATC voices are barely audible. I hope you get this solved. i7 8700K CPU @ 4.8 GHz, 32 GB DDR4 3000 memory, Gigabyte Aorus Z370 MB, EVGA RTX 2060 Super XC Ultra GPU 8GB GDDR6 Memory, MasterAir MA610P CPU cooler, 1T PCIe NVMe SSD, 500GB SSD, 2T HDD, 3 Asus 24" monitors, Saitek X56 Rhino H.O.T.A.S., Altec Surround Sound System.
April 23, 20206 yr Commercial Member Two things to try: First - Control Panel, System, Device Manager, Sound Video and Game Controllers, choose your Audio device, choose menu item Properties, click Update Driver, click browse my computer for driver software, click at the bottom Let me pick from a list of available drivers on my computer, choose High definition Audio Device, after update reboot. That reinstates the driver defaults after rebooting try out the sounds. The same thing can be done again to choose custom driver if required check if that's any better or causes the problem. Second - Update the Graphics card drivers or use GeForce Experience to quick update. The GPUs send sounds directly to a monitor so they have drivers that may need reinstalling. Steve Waite: Engineer at codelegend.com
April 23, 20206 yr In Windows go to Control Panel -> Sound Click on the communications tab Select "do nothing" in the dropdown box. I think the default setting is to reduce the volume by 80%. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
April 23, 20206 yr Commercial Member Mine is set to 80% mute but does nothing to the sounds in the sim or other sounds coming in the mix because the communications device is another. It might be also worth checking the selection of other sound sources in the P3D Options, Sound page Voice Playback. Steve Waite: Engineer at codelegend.com
April 23, 20206 yr Author Thank you both, Drivers are up to date. I think I do not have a communications sound device. My only sound device listed is my Logitech surround system (5.1, front left, front, right, rear left, rear right, center). https://www.dropbox.com/s/eee1xuosyrvdj79/Sound1.png?dl=0 https://www.dropbox.com/s/ubejgxc2d2z7iss/Sound2.png?dl=0 Karl i9-9900K@5,0 | 32GB 3200 | 2080TI | 4K 55" | MSFS | P3D V5
Archived
This topic is now archived and is closed to further replies.