August 6, 20205 yr Hi, I´ve got a Wheels stand pro v2 with my logitech yoke and pedals, and I´m thinking about upgrading to the honeycomb yoke. I´d love to know if someone managed to make the yoke work with the wheel stand pro or to see if there´s a modded solution for it. I don´t have a table close to me to attach the honeycomb there so the stand is the only way I have for now. Cheers Carlos NLR Motion Platform V3, Intel Core i9-9900K OC @ 5Ghz, Gigabyte Gaming OC 11GB RTX 2080ti, Gigabyte Z390 Aorus Ultra. Thermaltake Water 3.0 Riing LED RGB 360. Corsair Vengeance RGB Pro DDR4 3000 PC4-24000 32GB 4x8GB CL15. Lexar Professional NM700 M.2 2280 PCIe Gen3x4 NVMe 1TB SSD. Toughpower iRGB Plus 80 Plus Platinum 850W Full Modular. Thermaltake View32 TG USB 3.0 RGB. Oculus Rift S. Qled Samsung 65Q7FN.
August 6, 20205 yr The yoke platform of the Wheelstand Pro is about 2-3 cm too narrow for the Honeycomb's mounting clamps. Also, the clamps won't grip the platform, since the gap when they'e fully screwed in is about 0.5 cm bigger than the thickness of the platform. So It seems to me that the only way to mount the yoke would be to attach a wider and thicker board or metal plate on top of the platform. Edited August 6, 20205 yr by Muklum Clarification
August 7, 20205 yr Author 12 hours ago, Muklum said: The yoke platform of the Wheelstand Pro is about 2-3 cm too narrow for the Honeycomb's mounting clamps. Also, the clamps won't grip the platform, since the gap when they'e fully screwed in is about 0.5 cm bigger than the thickness of the platform. So It seems to me that the only way to mount the yoke would be to attach a wider and thicker board or metal plate on top of the platform. Thanks. I contacted the makers of the Wheel stand pro yesterday and they told me they´re working in a solution, and to get in touch with them again in a couple of days. So the solution maybe pretty close. Cheers Carlos NLR Motion Platform V3, Intel Core i9-9900K OC @ 5Ghz, Gigabyte Gaming OC 11GB RTX 2080ti, Gigabyte Z390 Aorus Ultra. Thermaltake Water 3.0 Riing LED RGB 360. Corsair Vengeance RGB Pro DDR4 3000 PC4-24000 32GB 4x8GB CL15. Lexar Professional NM700 M.2 2280 PCIe Gen3x4 NVMe 1TB SSD. Toughpower iRGB Plus 80 Plus Platinum 850W Full Modular. Thermaltake View32 TG USB 3.0 RGB. Oculus Rift S. Qled Samsung 65Q7FN.
August 7, 20205 yr Thanks, that's sounds hopeful. Please let us know what solution they come up with.
August 9, 20205 yr Moderator I had a problem with the clamps on a CH Pro Yoke not closing far enough to grip the underside of my sim desk's keyboard support. So I used a 1" wide x 1/4" thick piece of wood under the keyboard support to allow the clamps to grip tightly, Fr. Bill AOPA Member: 07141481 AARP Member: 3209010556 Avsim Board of Directors | Avsim Forums Moderator
August 9, 20205 yr 9 hours ago, n4gix said: I had a problem with the clamps on a CH Pro Yoke not closing far enough to grip the underside of my sim desk's keyboard support. So I used a 1" wide x 1/4" thick piece of wood under the keyboard support to allow the clamps to grip tightly, That's the solution I was thinking of using for the Honeycomb yoke and the Wheelstand Pro, but I'd need a board that extends to the right, since I've also pre-ordered the Honeycomb throttle quadrant, and I don't know yet how far the board would have to extend. So it would be nice if the Wheelstand makers could offer a neater option without requiring the purchase of a whole new stand.
August 9, 20205 yr Moderator Buy a piece several feet long and cut to fit. Easy work! Fr. Bill AOPA Member: 07141481 AARP Member: 3209010556 Avsim Board of Directors | Avsim Forums Moderator
January 8, 20215 yr I just e-mailed them the other day and they say they're still working on it. So much for being "pretty close" back in August. hehe i7 8700K @4Ghz, EVGA RTX3080 Ultra, 32GB RAM, Two 2K displays. Alpha Yoke, Bravo Throttle Quadrant, CH Pedals.
Archived
This topic is now archived and is closed to further replies.