October 11, 20205 yr 1 minute ago, altenae said: Thanks you very much. Was there a full flightplan loaded ? I always load the flightplan EDDL-EBBR and choose the ILS 25L-Z. Without a flightplan it seems to work. But with the flightplan it seems to capture the LOC but loosing it and continue in NAV mode again (Green) and LOC is changed into BLUE. Yes full flight plan with a departure and arrival pattern as well.
October 11, 20205 yr Author 7 minutes ago, Armchair Pilot said: Yes full flight plan with a departure and arrival pattern as well. Never ever it holds the loc when flying this plan and doing everything like you do... I wish I could find out the issue on my side......makes me nuts... MSI Tomahawk Z790, I7-13700K, DDR5 6000mhz, MSI 4090, 3x SSD 980 PRO, Corsair 360 Liguid CPU cooler, Corsair H1200V2 power.
October 11, 20205 yr Author Tried again this route...(EDDL-EBBR) and still the same issue LOC is captured (green LOC) Loosing the LOC is (purple diamond drifting away from the center (LOC Blue and NAV geen) No idea why this is constant happening to me. MSI Tomahawk Z790, I7-13700K, DDR5 6000mhz, MSI 4090, 3x SSD 980 PRO, Corsair 360 Liguid CPU cooler, Corsair H1200V2 power.
October 11, 20205 yr 5 hours ago, altenae said: Tried again this route...(EDDL-EBBR) and still the same issue LOC is captured (green LOC) Loosing the LOC is (purple diamond drifting away from the center (LOC Blue and NAV geen) No idea why this is constant happening to me. Did you try the flight plan that Armchair Pilot flew (starting cold and dark and including the approach procedure)? When I get a chance I'll try the flight plan you posted. For my earlier flight, although I specified ILS 25-Z for the approach, somehow the VOR-DME 25L got substituted somehow. I had to change it on arrival and flew in heading select mode until capturing the localizer. When your autopilot reverts to NAV mode, I wonder what waypoint it is guiding to? Have you tried cycling the LOC/APPR modes or the autopilot? Edit: Okay, I did exactly your flight plan. (Wondering why you chose low altitude airways instead of high altitude airways?) Everything worked fine, so I don't have anything new to report. The only difference is that I am using the latest Navigraph beta navdata (current cycle, rev 6) and the latest A320 mod just updated before doing this flight. Edited October 11, 20205 yr by Donstim
October 11, 20205 yr Author 3 hours ago, Donstim said: Did you try the flight plan that Armchair Pilot flew (starting cold and dark and including the approach procedure)? When I get a chance I'll try the flight plan you posted. For my earlier flight, although I specified ILS 25-Z for the approach, somehow the VOR-DME 25L got substituted somehow. I had to change it on arrival and flew in heading select mode until capturing the localizer. When your autopilot reverts to NAV mode, I wonder what waypoint it is guiding to? Have you tried cycling the LOC/APPR modes or the autopilot? Edit: Okay, I did exactly your flight plan. (Wondering why you chose low altitude airways instead of high altitude airways?) Everything worked fine, so I don't have anything new to report. The only difference is that I am using the latest Navigraph beta navdata (current cycle, rev 6) and the latest A320 mod just updated before doing this flight. Thank you. Will try tomorrow this flight again. I wish I could find out what I am doing wrong or is wrong on my side. Maybe a fresh install..... It's really capturing the LOC but not holding it for some.reason. Glideslope is perfect MSI Tomahawk Z790, I7-13700K, DDR5 6000mhz, MSI 4090, 3x SSD 980 PRO, Corsair 360 Liguid CPU cooler, Corsair H1200V2 power.
Archived
This topic is now archived and is closed to further replies.