November 12, 20205 yr I have a problem I was using MSFS2020 using Xbox Game Pass to see if liked it and I had no problems with my flight controllers and figured I would purchase the Deluxe version thru the MS Store. I made the purchase and the download went very well but that’s when the problem started. I have the Saitek Pro Flight Yoke System and the HOTS Warthog with MFG Crosswinds Pedals. I set them in the sim and everything registers properly in the setup fields. On the runway when I move the controllers the yoke moves as it should when I try taking off and reach take off speed and I rotate the aircraft will not take off. Example the Cessna 172 rotate between 60 and 70 knots flaps about 50% Weather Scattered clouds no wind the Cessna will not take off. If I set the Flaps to full I can get off the ground for a little but then even with full power and yoke pulled all the way back it crashes even at 110 knots. The same happens with other planes I've tried, this happens with the Saitek or the Warthog. Both controllers worked when using Game Pass. Any help would be appreciated. May I should get a refund from the MS Store and Purchase it from Steam. 8700K @ 5.1ghz - Swiftech Drive X3 AIO - Evga FTW3 1080Ti - 32gb 3200 DDR4 Ram - 2 1440 monitors - HP Reverb G1 - HOTAS Warthog - Saitek Pro Flight - MFG Crosswinds
November 12, 20205 yr Two ideas - make sure your settings in the sim menu are not set to legacy flight model and check the weight and fuel loads. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
November 12, 20205 yr Check the elevation trim setting and the flaps. Elevation trim is off the start setting by default, at least in the C172. Intel i7-13700K / AsRock Z790 / Crucial 32 GB DDR 5 / ASUS RTX 4080OC 16GB / BeQuiet ATX 1000W / WD m.2 NVMe 2TB (System) / WD m.2 NVMe 4 TB (MSFS) / WD HDD 10 TB / XTOP+Saitek hardware panel / LG 34UM95 3440 x 1440 / HP Reverb 1 (2160x2160 per eye) / Win 11
November 12, 20205 yr I concur on that, check your trim and also trim mappings. Also there is a weird crossover between trim and elevator that Rob Young talked about, he recommended moving the yoke through 360 degrees before take off. sounds weird but worth a try.
November 12, 20205 yr 38 minutes ago, Glenn Fitzpatrick said: he recommended moving the yoke through 360 degrees before take off Interesting. Moving the yoke through all dimensions of travel (axis) was a must in preflight during my flight training back in the early 1970's and it stuck with me. Edited November 12, 20205 yr by fppilot Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
November 13, 20205 yr Author Thanks a lot it was set for legacy flight model that was driving me crazy working great now. 8700K @ 5.1ghz - Swiftech Drive X3 AIO - Evga FTW3 1080Ti - 32gb 3200 DDR4 Ram - 2 1440 monitors - HP Reverb G1 - HOTAS Warthog - Saitek Pro Flight - MFG Crosswinds
Archived
This topic is now archived and is closed to further replies.