Last week arrived my Airbus Thrustmaster set of joystick and throttles. I can see lots of posts (issues) spread over the different forums, but can anyone lead me to a good (actual) setup for using these sets with P3Dv4 for FSLabs (and/or Aerosoft) busses ? A good FSUIPC setup somewhere to find ?

Edited December 15, 20205 yr by Pluto7777

Aerosoft has a special setting for the throttles, that must be enabled in each configurator (one for the A318/A319, one for the A320/A321 and I guess one for the A333). I understand it takes care of everything. I'm pretty sure FSLabs has something similar. For the stick, well, I don´t know.

Edited December 15, 20205 yr by Luis Hernandez

im still waiting for amazon to have the throttles.... nearly a month now...

Throttles are here, fluffyflops, yours also ?   did you install them ?

2 hours ago, Pluto7777 said:

Throttles are here, fluffyflops, yours also ?   did you install them ?

yes I have them working flawlessly with the fsl and aerosoft yes. But i had to use a paid version of fsuipc to it 

4 hours ago, fluffyflops said:

yes I have them working flawlessly with the fsl and aerosoft yes. But i had to use a paid version of fsuipc to it 

Could you kindly share the FSUIPC settings for your throttle and the AS Airbus, please?

I've gotten into a muddle with FSUIPC and the TCA throttle. The AS provided .ini file settings don't recognise the detent ranges either.

Yes, mine is still unboxed, i dare not to change my actual settings before someone can convince me that they are doing OK with reversers and engine switches included !  So yes; very interested to read your settings...

 

8 hours ago, F737NG said:

Could you kindly share the FSUIPC settings for your throttle and the AS Airbus, please?

I've gotten into a muddle with FSUIPC and the TCA throttle. The AS provided .ini file settings don't recognise the detent ranges either.

I'll type something up this afternoon. 

Where are is aerosoft. Ini file settings? 

Cheers 

2 hours ago, fluffyflops said:

I'll type something up this afternoon. 

Where are is aerosoft. Ini file settings?

That would be great.

File is called AB_ND_GDI.ini, located in xxxxxx\aerosoft\Aerosoft A318-A319 Pro V5\Data\

 

I've previously tried the Airbus Configurator method: https://forum.aerosoft.com/index.php?/topic/159296-how-to-use-the-tca-throttle-the-reverse-levers-and-starter-buttons-with-aerosoft-aibusses-under-p3dv4v5/
and manipulating the AB_ND_GDI.ini method: https://forum.aerosoft.com/index.php?/topic/156444-tca-support-for-the-aerosoft-busses-and-update-schedule/&do=findComment&comment=1009807

Neither method works properly for me, despite fully updating to the latest Airbus version, following the steps exactly as described and rolling back to default settings before trying the other method.

4 minutes ago, F737NG said:

That would be great.

File is called AB_ND_GDI.ini, located in xxxxxx\aerosoft\Aerosoft A318-A319 Pro V5\Data\

 

I've previously tried the Airbus Configurator method: https://forum.aerosoft.com/index.php?/topic/159296-how-to-use-the-tca-throttle-the-reverse-levers-and-starter-buttons-with-aerosoft-aibusses-under-p3dv4v5/
and manipulating the AB_ND_GDI.ini method: https://forum.aerosoft.com/index.php?/topic/156444-tca-support-for-the-aerosoft-busses-and-update-schedule/&do=findComment&comment=1009807

Neither method works properly for me, despite fully updating to the latest Airbus version, following the steps exactly as described and rolling back to default settings before trying the other method.

ok this is what I have.

can you paste your fsuipc section with the following entries 

 

JOYNAMES  

 

mine is as below  as you can see my throttle  is down as  0 

[JoyNames]
AutoAssignLetters=No
1=T.A320 Pilot
1.GUID={9EE4CF10-33B3-11EB-8009-444553540000}
2=MFG Crosswind V2
2.GUID={9EE36F80-33B3-11EB-8005-444553540000}
0=TCA Q-Eng 1&2
0.GUID={A2A36D30-4076-11EB-8001-444553540000}

 

then look at your fslabs profile, as you can see  0 is set to -{ TO SIM: THROTTLE_SET }-

whereas the other options are set as direct to fsuipc     -{ DIRECT: Aileron }-

 

 

[Profile.fslabs]
1=FSLabs A320X CFM - Aeroflot Russian Airlines VQ-BKS
2=FSLabs A320X CFM - easyJet Europe OE-ICF
 

[Axes.fslabs]
RangeRepeatRate=10
0=0Y,256,F,0,0,0,65697    -{ TO SIM: THROTTLE_SET }-
1=1X,256,D,0,0,0,1    -{ DIRECT: Aileron }-
2=1Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-
3=2X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
4=2Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
5=2R,256,D,0,0,0,3    -{ DIRECT: Rudder }-
 

for everything else for example the 330 is as below  everything is set as direct to fsuipc

[Profile.787]
1=QualityWings 787-9 RR Virgin Atlantic Airways G-VNYL -SATCOM
2=QualityWings 787-9 RR Virgin Atlantic Airways G-VSPY -SATCOM
3=Boeing B787-9 Air Canada C-FGDT -SATCOM
4=Aerosoft A333 professional KLM PH-AKA

[Axes.787]
RangeRepeatRate=10
0=0X,256,D,0,0,0,4    -{ DIRECT: Throttle }-
1=1X,256,D,0,1,0,0    -{ DIRECT: Aileron }-
2=1Y,256,D,0,0,0,2    -{ DIRECT: Elevator }-
3=1S,256,D,0,0,0,4    -{ DIRECT: Throttle }-   this i need to take out as its the throttle on the joystick 
4=2X,256,D,0,0,0,7    -{ DIRECT: LeftBrake }-
5=2Y,256,D,0,0,0,8    -{ DIRECT: RightBrake }-
6=2R,256,D,0,0,0,3    -{ DIRECT: Rudder }-

and finally the buttons are like this 

 

[Buttons]
PollInterval=25
ButtonRepeat=20,10
0=P0,7,C66587,78253     -{ROTOR_BRAKE}-
1=U0,7,C66587,78252     -{ROTOR_BRAKE}-
2=P0,6,C66587,78252     -{ROTOR_BRAKE}-
3=U0,6,C66587,78253     -{ROTOR_BRAKE}-
4=P0,3,C66587,78248     -{ROTOR_BRAKE}-
5=P0,3,C66587,78247     -{ROTOR_BRAKE}-
6=U0,3,C66587,78247     -{ROTOR_BRAKE}-
7=U0,3,C66587,78250     -{ROTOR_BRAKE}-
8=P0,2,C66587,78243     -{ROTOR_BRAKE}-
9=P0,2,C66587,78242     -{ROTOR_BRAKE}-
10=U0,2,C66587,78242     -{ROTOR_BRAKE}-
11=U0,2,C66587,78245     -{ROTOR_BRAKE}-
12=P1,3,K90,8     -{Key press: Z}-

 

my idents as below 

 

Super Thx ! i ll try it asap

....

Edited February 23, 20215 yr by Pluto7777

6 hours ago, Pluto7777 said:

Super Thx ! i ll try it asap

....

no problem.  the thing to remember

fslabs -                        set in fsupic as  "direct to sim"

everything else -         set in fsuipc as "direct to fsuipc"

 

thanks how i got it workiing anyhows.

good luck.  you dont be the first person to struggle with this.

 

Edited February 23, 20215 yr by fluffyflops