P2A stopps responding

[mat_p 1]

^this is xplane by the way

[Dave-Pilot2ATC 870]

The "retuning" is happening in the aircraft/SIM.  P2A reflects whatever is tuned in the cockpit.  If you change frequencies in P2A, it changes, or attempts to change, the frequency in the SIM.  If the aircraft does not allow external programs to tune the radios, then it will revert back to whatever the aircraft tunes to.  

If ATC is turned on in the SIM and it controls the frequencies, like in MSFS, then that will cause the radios to retune after the change.

Of course, if there are other plugins running that try and control the frequency, they could definitely cause this behavior.

Dave

[GRiM 0]

Mine won’t even recognize that I’m talking to it after the latest MSFS update. Before it would go unresponsive on arrival. Now it goes unresponsive right away. 

[Klausen 0]

Hi

 

First of all, thanks for a great program. I love it 🙂

I have the same issue. Works fine and then suddenly it stops responding to my calls. CPU and memory are not maxed out.

I have had this several times. First I thought is was a time out because P2A could not understand what I was saying, this is because What I am saying and what is understood is  not the same before it stops responding.

Here are the log entries 1 minute before it stops (23:40:37) and a couple of minutes after.

HandleVFRPatternDepartureRequest 23:39:47
InterruptAudio in SayPhrase: Ranger Flight Zero One Two Cleared for Straight turnout.  04/11/2021 23:39:47
AudioInterrupts: 1 in InterruptAudio 23:39:47
ATC Speak:  Ranger Flight Zero One Two Cleared for Straight turnout. 23:39:47
Sug Resp:  ~Straight turnout approved 23:39:47
OnTTSWavePlaybackStopped 04/11/2021 23:39:51
UnInterruptAudio in OnTTSWavePlaybackStopped SugRes:~Straight turnout approved  Ranger Flight Zero One Two
 04/11/2021 23:39:51
AudioInterrupts: 0 in UnInterruptAudio 23:39:51
InterruptAudio in SayItSpeak- Phrase: Straight turnout approved  Ranger Flight Zero One Two
 04/11/2021 23:39:51
AudioInterrupts: 1 in InterruptAudio 23:39:51
Speech Rejected: No Speech Recognized04/11/2021 23:39:56
Speech Rejected
UnInterruptAudio in OnSayItSpeakCompleted 04/11/2021 23:39:56
AudioInterrupts: 0 in UnInterruptAudio 23:39:56
InterruptAudio in OnPilotSpeaking 04/11/2021 23:40:05
AudioInterrupts: 1 in InterruptAudio 23:40:05
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:40:08
AudioInterrupts: 0 in UnInterruptAudio 23:40:08
Recognized Speech: Ranger Flight Zero One Two Radio check 23:40:08
Stopped Listening
GetInformationResponse 23:40:08
InterruptAudio in SayPhrase: Ranger Flight Zero One Two You are loud and clear. 04/11/2021 23:40:08
AudioInterrupts: 1 in InterruptAudio 23:40:08
ATC Speak:  Ranger Flight Zero One Two You are loud and clear.23:40:09
Sug Resp:  23:40:09
OnTTSWavePlaybackStopped 04/11/2021 23:40:12
UnInterruptAudio in OnTTSWavePlaybackStopped SugRes:Straight turnout approved  Ranger Flight Zero One Two
 04/11/2021 23:40:12
AudioInterrupts: 0 in UnInterruptAudio 23:40:12
InterruptAudio in OnPilotSpeaking 04/11/2021 23:40:20
AudioInterrupts: 1 in InterruptAudio 23:40:20
Started Listening
NewGPSWpt: BW363
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:40:27
AudioInterrupts: 0 in UnInterruptAudio 23:40:27
Recognized Speech: Ranger Flight Zero One Two Request Straight Out Departure Runway Two Six 23:40:27
Stopped Listening
HandleVFRPatternDepartureRequest 23:40:27
Object reference not set to an instance of an object.
   at P2A_2020.Controller.c6b5ef19f019cda15fb19e399cbd456a6(String& c10d14a58376e8a5fedf6f0955109c8c6, SpeechInteraction c9408508583fe6860a9cb8bcb2e3c1245, String& c2d61cf92c662496fc273eb7fc03570f3)
   at P2A_2020.Controller.c147faef1bcd580d0a7fc61b69bcb5dc1(String& c10d14a58376e8a5fedf6f0955109c8c6, SpeechInteraction c9408508583fe6860a9cb8bcb2e3c1245, String& c2d61cf92c662496fc273eb7fc03570f3)
   at P2A_2020.Controller.RespondToPilot(SpeechInteraction SI)
   at P2A_2020.ATCListener.HandleRecognizedSpeech(Boolean SpeechEmulated)
   at P2A_2020.ATCListener.c7b7d03cbc0273bf9bce3de3da18fdbed(Object cb25b07786a6e786dea76cf87175f59f0, RecognizeCompletedEventArgs cb4d4bf05d278f00a41fc902f6c5d26a2)
   at System.Speech.Recognition.SpeechRecognitionEngine.RecognizeCompletedProxy(Object sender, RecognizeCompletedEventArgs e)
InterruptAudio in OnPilotSpeaking 04/11/2021 23:40:30
AudioInterrupts: 1 in InterruptAudio 23:40:30
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:40:37
AudioInterrupts: 0 in UnInterruptAudio 23:40:37
Stopped Listening
InterruptAudio in OnPilotSpeaking 04/11/2021 23:40:42
AudioInterrupts: 1 in InterruptAudio 23:40:42
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:40:45
AudioInterrupts: 0 in UnInterruptAudio 23:40:45
Stopped Listening
InterruptAudio in OnPilotSpeaking 04/11/2021 23:40:46
AudioInterrupts: 1 in InterruptAudio 23:40:46
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:40:49
AudioInterrupts: 0 in UnInterruptAudio 23:40:49
Stopped Listening
InterruptAudio in OnPilotSpeaking 04/11/2021 23:40:50
AudioInterrupts: 1 in InterruptAudio 23:40:50
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:40:54
AudioInterrupts: 0 in UnInterruptAudio 23:40:54
Stopped Listening
InterruptAudio in OnPilotSpeaking 04/11/2021 23:41:44
AudioInterrupts: 1 in InterruptAudio 23:41:44
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:41:49
AudioInterrupts: 0 in UnInterruptAudio 23:41:49
Stopped Listening
NewGPSWpt: OPBW
InterruptAudio in OnPilotSpeaking 04/11/2021 23:43:15
AudioInterrupts: 1 in InterruptAudio 23:43:15
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:43:19
AudioInterrupts: 0 in UnInterruptAudio 23:43:19
Stopped Listening
InterruptAudio in OnPilotSpeaking 04/11/2021 23:43:22
AudioInterrupts: 1 in InterruptAudio 23:43:22
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:43:28
AudioInterrupts: 0 in UnInterruptAudio 23:43:28
Stopped Listening
InterruptAudio in OnPilotSpeaking 04/11/2021 23:44:09
AudioInterrupts: 1 in InterruptAudio 23:44:09
Started Listening
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:44:12
AudioInterrupts: 0 in UnInterruptAudio 23:44:12
Stopped Listening
New Com1 Stby Freq: 121.8
New Com1 Stby Freq: 121.8
AssignedController: 129.8.  CtlrShrtName: OPBW Twr CtlrType: Tower23:45:49
Gnd ChatterFolder: D:\Pilot2ATC_2020_x64\Sounds\ATC_Chatter\Controllers\Dest_Gnd
ControllerFreqChanged: 121.8.  CtlrShrtName: OPBW Gnd CtlrType: Ground23:45:49
New Com1 Stby Freq: 129.8
Com1StandbyFreqChanged: 129.8.  CtlrShrtName: OPBW Twr CtlrType: Tower23:45:50
New Com1 Stby Freq: 129.8
InterruptAudio in OnPilotSpeaking 04/11/2021 23:45:50
AudioInterrupts: 1 in InterruptAudio 23:45:50
Started Listening
Com1StandbyFreqChanged: 129.8.  CtlrShrtName: OPBW Twr CtlrType: Tower23:45:50
UnInterruptAudio in OnPilotEndSpeaking 04/11/2021 23:45:53
AudioInterrupts: 0 in UnInterruptAudio 23:45:53
Stopped Listening
 

 

Kind reagrds

 

Klausen

[Dave-Pilot2ATC 870]

Thanks for the report.  I see an error message that I will investigate.

Dave

[Dave-Pilot2ATC 870]

Were you on a VFR flight?  If not, you should not request pattern departure.  I also noticed you requested it, got approval, then requested it again, after a radio check.  This makes me think you didn't hear a response, which might mean there was a problem with the volume settings or other sound issues.

If this happens again, please send me the complete log file via email as it has a lot of information in it that helps me understand what was going on.  Email to admin@pilot2atc.com.

Dave

[Klausen 0]

Hi Dave. 
I was on a IFR and I didn't ask for a departure. I was asking for a Straight in approach 🙂. Speech recon is not trained enough :)

So I asked again. No response, did a radio check, and asked again, no response.

Then kept asking for different things. like Radio check, "Say altimeter" etc. no response

[Dave-Pilot2ATC 870]

That could explain it.  The program may have crashed because it didn't have the information it needed for a Straight Out VFR Departure.  I will take a closer look with that context and may see the culprit.  If you know what controller you were talking to, that would help.

I would highly recommend taking the Language Training for all the controllers.  Most users report it can take you from about 50-60% accuracy up to 95% plus.  In fact, taking it more than once can improve recognition because it can record you saying the same things multiple different ways and then recognize them the next time you say it that way.

Dave 

Edited April 12, 2021 by Dave-Pilot2ATC