After CTD’s with every flight after the US update I now thought I would try again with the release of the performance update.

Accelerating down the runway (Amsterdam - De Luxe version ) I had 3x a 1 sec pause but I was able to take off.

Normally within half an hour I would get a CTD but I am still in the air ...

Fingers crossed 🤞

 

Unfortunately after 40 min : CTD 

2572453 Failed on SimConnect_CallDispatch for Message, return = 0xC000014B
  2572500 TransmitClientEvent failed! (Event=65706, Param=-1726, nGroup=0, fSame=0
  2572594 TransmitClientEvent failed! (Event=65706, Param=-1721, nGroup=0, fSame=0
  2572688 TransmitClientEvent failed! (Event=65706, Param=-1716, nGroup=0, fSame=0
  2572797 TransmitClientEvent failed! (Event=65706, Param=-1711, nGroup=0, fSame=0
  2572891 TransmitClientEvent failed! (Event=65706, Param=-1706, nGroup=0, fSame=0
  2572891 **** Too many TransmitClientEvent errors received! Re-connecting now ... ****
  2573438 MSFS no longer running - exiting

De same error as always : 65706 ( =trim)

Maybe try again after the next update... 😕 

 

 

Edited March 27, 20215 yr by GSalden

I had a pause last night on a takeoff roll, for about 2 seconds, which I have never had for years and years with either P3D or now MSFS 2020, until the latest FIX!

2 hours ago, GSalden said:

Unfortunately after 40 min : CTD 

2572453 Failed on SimConnect_CallDispatch for Message, return = 0xC000014B
  2572500 TransmitClientEvent failed! (Event=65706, Param=-1726, nGroup=0, fSame=0
  2572594 TransmitClientEvent failed! (Event=65706, Param=-1721, nGroup=0, fSame=0
  2572688 TransmitClientEvent failed! (Event=65706, Param=-1716, nGroup=0, fSame=0
  2572797 TransmitClientEvent failed! (Event=65706, Param=-1711, nGroup=0, fSame=0
  2572891 TransmitClientEvent failed! (Event=65706, Param=-1706, nGroup=0, fSame=0
  2572891 **** Too many TransmitClientEvent errors received! Re-connecting now ... ****
  2573438 MSFS no longer running - exiting

De same error as always : 65706 ( =trim)

Maybe try again after the next update... 😕 

 

 

With all due respect, have you considered that it’s something to do with your complicated setup? You seem to have a lot going on there (A good thing!) and I just wonder if some piece of hardware is causing you a CTD. Not an easy answer to accept, but seems feasible. Regardless, you have an amazing setup and it’s a shame you’re not able to use it.

10 minutes ago, Keirtt said:

With all due respect, have you considered that it’s something to do with your complicated setup? You seem to have a lot going on there (A good thing!) and I just wonder if some piece of hardware is causing you a CTD. Not an easy answer to accept, but seems feasible. Regardless, you have an amazing setup and it’s a shame you’re not able to use it.

Simconnect is not powerful enough at this moment so all data together is too much.

Prosim has released a preview version and when the SDK/Simconnect is more enhanced then it might work.

The development team from Prosim is in contact with Asobo.

Doing the same Amsterdam - Milan Linate flight at this very moment in P3Dv5 so it is not that I am grounded 😊

18 minutes ago, GSalden said:

Simconnect is not powerful enough at this moment so all data together is too much.

Prosim has released a preview version and when the SDK/Simconnect is more enhanced then it might work.

The development team from Prosim is in contact with Asobo.

Doing the same Amsterdam - Milan Linate flight at this very moment in P3Dv5 so it is not that I am grounded 😊

Your videos make me want to get the ProSim A320, too bad that I simply can't afford it and there isn't any cheaper option. There's Aerowinx PSX, but it's a 747.

Edited March 27, 20215 yr by BiologicalNanobot

30 minutes ago, GSalden said:

Simconnect is not powerful enough at this moment so all data together is too much.

Prosim has released a preview version and when the SDK/Simconnect is more enhanced then it might work.

The development team from Prosim is in contact with Asobo.

Doing the same Amsterdam - Milan Linate flight at this very moment in P3Dv5 so it is not that I am grounded 😊

I'm going to guess it's 95% probability that your equipment is causing the CTD, as others have speculated as well.  If possible, try to unplug each piece of equipment and test separately.  That way, you may be able to isolate the piece of equipment that is causing the CTD for you.  

My guess is, if you unplug all your equipment and just run MSFS like normal, it should be stable.

1 hour ago, GSalden said:

Simconnect is not powerful enough at this moment so all data together is too much.

Prosim has released a preview version and when the SDK/Simconnect is more enhanced then it might work.

The development team from Prosim is in contact with Asobo.

Doing the same Amsterdam - Milan Linate flight at this very moment in P3Dv5 so it is not that I am grounded 😊

Are you using any terrain enhancements in P3D V 5?

 

2 hours ago, BiologicalNanobot said:

Your videos make me want to get the ProSim A320, too bad that I simply can't afford it and there isn't any cheaper option. There's Aerowinx PSX, but it's a 747.

Keep your eye on the Prosim Marketplace. From time of time people sell their license.

2 hours ago, abrams_tank said:

I'm going to guess it's 95% probability that your equipment is causing the CTD, as others have speculated as well.  If possible, try to unplug each piece of equipment and test separately.  That way, you may be able to isolate the piece of equipment that is causing the CTD for you.  

My guess is, if you unplug all your equipment and just run MSFS like normal, it should be stable.

That probably is the case, but I can wait...

2 hours ago, Bobsk8 said:

Are you using any terrain enhancements in P3D V 5?

 

I fly in Europe + Turkey + Egypt and have 90% PR scenery + custom AG + POIs

Also I use EnvShade and just put up a link so in non EA mode the sun looks good again (EnvTex sun is not looking good)

I made 2 batchfiles : 

Late dawn-Day-Earky dusk (EA mode)

Late dusk-Night-Early dawn (EA mode)

All P3D, EnvShade and ASP3D settings are set by those batchfiles

Take a look at my YT channnel to see how the scenery looks