May 2, 20215 yr Hello again. A very strange behavior in P3D V5. When I'm on flight level where is no scenery to generate objects, I get very strong usage by prepar. What can be cause this? Because I'm concerned about it, as u can see my GPU just chillin in the corner when CPU working hard (for what?) i7 8700K @4.8 all cores, I mean it's weird Edited May 2, 20215 yr by Druce i7 8700K @4.8Ghz | Noctua NH-D15 | Asus ROG Maximus XI Hero | G.Skill TridentZ 4x8GB @3700Mhz | ROG Strix OC RTX 3080 Ti
May 2, 20215 yr I'd look at your LOD radius and autogen settings, as heavy autogen hits the CPU pretty hard. Both autogen and heavy AI traffic could be issues in a high-density area like Shanghai, especially with the sliders set too high. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 2, 20215 yr Author 51 minutes ago, w6kd said: I'd look at your LOD radius and autogen settings, as heavy autogen hits the CPU pretty hard. Both autogen and heavy AI traffic could be issues in a high-density area like Shanghai, especially with the sliders set too high. Here it is: Edited May 2, 20215 yr by Druce i7 8700K @4.8Ghz | Noctua NH-D15 | Asus ROG Maximus XI Hero | G.Skill TridentZ 4x8GB @3700Mhz | ROG Strix OC RTX 3080 Ti
May 2, 20215 yr I'd start by pulling the autogen/scenery draw distance, autogen vegetation density, and LOD radius all back at least one notch, then see how that goes and adjust from there. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 2, 20215 yr Author 53 minutes ago, w6kd said: I'd start by pulling the autogen/scenery draw distance, autogen vegetation density, and LOD radius all back at least one notch, then see how that goes and adjust from there. Doesn't help. I think something wrong with some programs and their settings like Active Sky settings... i7 8700K @4.8Ghz | Noctua NH-D15 | Asus ROG Maximus XI Hero | G.Skill TridentZ 4x8GB @3700Mhz | ROG Strix OC RTX 3080 Ti
May 2, 20215 yr I have no problem with AS. Have you tried disabling AS to see if that is the case? Gigabyte x670 Aorus Elite AX MB; AMD 7800X3D CPU; Deepcool LT520 AIO Cooler; 64 Gb G.Skill Trident Z5 NEO DDR5 6000; Win11 Pro; P3D V5.4; 1 Samsung 990 2Tb NVMe SSD: 1 Crucial 4Tb MX500 SATA SSD; 1 Samsung 860 1Tb SSD; Gigabyte Aorus Extreme 1080ti 11Gb VRAM; Toshiba 43" LED TV @ 4k; Honeycomb Bravo.
May 3, 20215 yr Start task manager to run with P3Dv5 then check what is running with P3D. Raymond Fry.
May 3, 20215 yr Hi, i had exactly the same problem after the installation of the nvidia driver. I had to restore default settings in ncp and then set again my settings. after that, my Cpu usage is back at a normal level ( i agree weird relation between cpu and gpu ) Best regards Alexandre
May 3, 20215 yr Author 5 hours ago, alexcotti said: Hi, i had exactly the same problem after the installation of the nvidia driver. I had to restore default settings in ncp and then set again my settings. after that, my Cpu usage is back at a normal level ( i agree weird relation between cpu and gpu ) Best regards Alexandre Hi. I'll try, but I have no edit NCP settings since install P3D i7 8700K @4.8Ghz | Noctua NH-D15 | Asus ROG Maximus XI Hero | G.Skill TridentZ 4x8GB @3700Mhz | ROG Strix OC RTX 3080 Ti
May 3, 20215 yr 5 hours ago, alexcotti said: Hi, i had exactly the same problem after the installation of the nvidia driver. I had to restore default settings in ncp and then set again my settings. after that, my Cpu usage is back at a normal level ( i agree weird relation between cpu and gpu ) Best regards Alexandre What are your NCP settings? Gigabyte x670 Aorus Elite AX MB; AMD 7800X3D CPU; Deepcool LT520 AIO Cooler; 64 Gb G.Skill Trident Z5 NEO DDR5 6000; Win11 Pro; P3D V5.4; 1 Samsung 990 2Tb NVMe SSD: 1 Crucial 4Tb MX500 SATA SSD; 1 Samsung 860 1Tb SSD; Gigabyte Aorus Extreme 1080ti 11Gb VRAM; Toshiba 43" LED TV @ 4k; Honeycomb Bravo.
Archived
This topic is now archived and is closed to further replies.