November 17, 20214 yr Took a flight from Cherbourg to Durham Tees today in the Caravan. Firstly I wanted the AI copilot to handle ATC, which didnt happen, and then on climb I could only hear my pilot's voice, none of the other traffic.. On getting to Durham Tees I could select the airfield frequency, but there was no option to ask for joining and landing instructions. Is this just part of the ATC mess at the moment? I've been using Azure and don't really want to just have text ATC.
November 17, 20214 yr It has been breaking randomly since SU6. Restarting the sim fixes it. Edited November 17, 20214 yr by Tuskin38
November 17, 20214 yr I've stopped using the co-pilot for communications and haven't had this issue since then. Rick Abshier 5900X | RTX 5070 Ti OC| 64 GB@3600 | India Pale Ale
November 17, 20214 yr 1 hour ago, Langeveldt said: Took a flight from Cherbourg to Durham Tees today in the Caravan. Firstly I wanted the AI copilot to handle ATC, which didnt happen, and then on climb I could only hear my pilot's voice, none of the other traffic.. On getting to Durham Tees I could select the airfield frequency, but there was no option to ask for joining and landing instructions. Is this just part of the ATC mess at the moment? I've been using Azure and don't really want to just have text ATC. An obvious one, but was your volume turned up? I have done this a few times! Rob (but call me Bob or Rob, I don't mind). I like to trick airline passengers into thinking I have my own swimming pool in my back yard by painting a large blue rectangle on my patio. Intel 14900K in a Z790 motherboard with water cooling, RTX 4080, 32 GB 6000 CL30 DDR5 RAM, W11 and MSFS on Samsung 980 Pro NVME SSD's. Core Isolation Off, Game Mode Off.
November 17, 20214 yr 2 hours ago, Langeveldt said: Took a flight from Cherbourg to Durham Tees today in the Caravan. Firstly I wanted the AI copilot to handle ATC, which didnt happen, and then on climb I could only hear my pilot's voice, none of the other traffic.. On getting to Durham Tees I could select the airfield frequency, but there was no option to ask for joining and landing instructions. Is this just part of the ATC mess at the moment? I've been using Azure and don't really want to just have text ATC. Common Issue... if, at some point, you are given instructions to change atc frequency and as you or your AI is doing so a message comes in from another aircraft on the old frequency.. at that point, you loose all communicatioins from tower and only get your responses. If you are not using AI for comms this obviously means you cant reply because you have nothing to reply to.. but the AI will still respond, even though you don't see the tower comms and offtimes, options in the ATC window just won't appear.. it will be frozen in the state you last had comms from the tower. In addition, you will probably, from that point on, not hear any other traffic on ATC either. If you don't use AI for comms.. just be careful when you select to change frequencies.. don't change when a reply is expected from another aircraft 🙂 This situation has been exacerbated by using AI programs, where there is a lot more ATC communication going on. Zendesk are aware, but additinal reports would help 🙂 Graham Edited November 17, 20214 yr by Moria15 System specs... CPU AMD5950, GPU AMD6900XT, ROG crosshair VIII Hero motherboard, Corsair 64 gig LPX 3600 mem, Air cooling on GPU, Kraken x pump cooling on CPU. Samsung G7 curved 27" monitor at 2k resolution ULTRA default settings.
November 17, 20214 yr Author 41 minutes ago, Moria15 said: Common Issue... if, at some point, you are given instructions to change atc frequency and as you or your AI is doing so a message comes in from another aircraft on the old frequency.. at that point, you loose all communicatioins from tower and only get your responses. If you are not using AI for comms this obviously means you cant reply because you have nothing to reply to.. but the AI will still respond, even though you don't see the tower comms and offtimes, options in the ATC window just won't appear.. it will be frozen in the state you last had comms from the tower. In addition, you will probably, from that point on, not hear any other traffic on ATC either. If you don't use AI for comms.. just be careful when you select to change frequencies.. don't change when a reply is expected from another aircraft 🙂 This situation has been exacerbated by using AI programs, where there is a lot more ATC communication going on. Zendesk are aware, but additinal reports would help 🙂 Graham Thanks for the detailed response. I think that was it. I guess with the AI add ons that's going to happen a lot more often! Edited November 17, 20214 yr by Langeveldt
Archived
This topic is now archived and is closed to further replies.