July 7, 20232 yr Hi Crew Wondering if someone could advise. Setting up some custom camera views in the Asobo A320neo using the numpad. Steps Using arrow keys I move to the selected view point I press CTRL + numpad key to bind the view to that key I press the numpad key and the cam moves to the view. This works fine. I then make a change to the view. Maybe I tilt the camera up a bit more to look at the overhead better etc. Again I press CTRL + numpad key to bind the view to that same key I press the numpad key and the cam moves to the view - and it does not reflect the change. It stays locked on what I first created. Example I make numpad 4 = look left 90 degrees and save it I go back to numpad 4 & change it to look left 60 degrees and save it However when I go back it is still numpad 4 = 90 degrees. It wont register the 60 degrees. It ignores any changes. I deleted the camera.cfg and the game made a new one but it has the same issues. Edited July 7, 20232 yr by ThrottleUp
July 8, 20232 yr A good tutorial here https://forums.flightsimulator.com/t/guide-how-to-configure-cockpit-views-cameras-using-custom-camera-controller-assignments/171116 Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
July 8, 20232 yr Author 2 hours ago, Dominique_K said: A good tutorial here https://forums.flightsimulator.com/t/guide-how-to-configure-cockpit-views-cameras-using-custom-camera-controller-assignments/171116 Thanks, checking that out now.
July 8, 20232 yr It's ctrl+alt+normal number (not numpad) to save the views. Numpad to select them once saved.
July 9, 20232 yr Author On 7/8/2023 at 2:40 PM, Dazzlercee23 said: It's ctrl+alt+normal number (not numpad) to save the views. Numpad to select them once saved. Ok thanks Im back on the game now and will do that and see if it works for me.
July 10, 20232 yr That's right Ctrl-alt-number on the top row. Works every time. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
July 12, 20232 yr Author Thank you all for your help! Unfortunately a bit of a road block... CTRL+ALT+top row # works initially - but it does not stick. The key forgets the view I told it to remember after about a minute 😞 Example of problem: I bound CTRL+ALT+TOP ROW 9 = a center console cam view on the A320 I press ALT+TOP ROW 9 and the camera moves to the center console cam view 👍 However about a minute or two later while flying when I go back to ALT+TOP ROW 9 its forgotten my view. Instead the cam is facing the windscreen from the captains seat. Now for SURE its something I am screwing up because I can see none of you on Avsim are seeing such issues. I'll reset all the key bindings from the menu maybe!
July 12, 20232 yr Try assigning your own keys to your custom views in the settings. I use the numpad in a logical way, numpad 5 as pilot view, 9 as overhead, 1 as FMC etc. Save your views with ctrl+alt+top row number, retrieve with equivalent numpad (no alt or ctrl).
July 12, 20232 yr Author 20 minutes ago, Dazzlercee23 said: Save your views with ctrl+alt+top row number, retrieve with equivalent numpad (no alt or ctrl). Oh wait, I was not doing this. I was retrieving with ALT + Top row # Will go start up the game and try again using numpad to go back to the view. I had missed that part.
July 12, 20232 yr 5 hours ago, ThrottleUp said: Oh wait, I was not doing this. I was retrieving with ALT + Top row # Will go start up the game and try again using numpad to go back to the view. I had missed that part. You have to assign the numpad keys to retrieve your views.
July 12, 20232 yr Author 3 hours ago, Dazzlercee23 said: You have to assign the numpad keys to retrieve your views. Oh ok..you mean CTRL+ALT+NUMPAD#?
July 12, 20232 yr 31 minutes ago, ThrottleUp said: Oh ok..you mean CTRL+ALT+NUMPAD#? No. In your keyboard profile settings in the sim, assign the numpad keys (or any other keys you may wish) to the 'Load Custom View x' functions.
July 14, 20232 yr Author On 7/13/2023 at 2:38 AM, Dazzlercee23 said: No. In your keyboard profile settings in the sim, assign the numpad keys (or any other keys you may wish) to the 'Load Custom View x' functions. Ahh ok , got it. The custom views have been set and I'll set numpad to load them. Thanks!
Archived
This topic is now archived and is closed to further replies.