November 1, 20241 yr Hello; I am trying to get some assistance with this UGSX addon in my system. My situation is that a few months ago my Microsoft System became corrupted and after the repair and reinstallation of all software, when it was turn for the UGSX did not work properly as it was before from that point. Once I had reinstalled all Microsoft and then Sim software (P3D 4.5), I then proceed it with UGSX. Now, the 1st thing notice that the 1st panel of installation does appears but cannot attached to this panel, but it did not show me the one to enter the product number. Then, the next thing that appears the progress bar that runs while Sim its loading. Then addon menu panel with all the options does appears however, when attempting to do the Aircraft Settings and saved it does nothing. First, the Tug vehicle does shows but the 3ea figures of the tarmac do not. Furthermore, when prompted the pushback sequence option same thing happened, nothing happens with the exception of the tug vehicle. No idea what to try next, so could you please assist? I was looking for an attachment option in the panel to attach the UGSX Log Note Pad but there's none available than I see therefore, I have copied and pasted it below as it shows from the UGSX Log option. Hope to hear a solution or advise or what its causing this it. Thank you. 🤔 Att. Fernando Rentas Order #90076 Order Date: 27th Sep 2019 ------------------------ INITIALIZATING FS MODULE ------------------------ It's a supported Flight Simulator: [11]... Hooking to the Flight Simulator's MAIN window procedure... Registering CUSTOM windows messages... Reading the INITIALIZATION file... Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths... Reading settings from the FSX.CFG or PREPAR3D.CFG file located here: C:\Users\Ferna\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg The Flight Simulator's frame rate LIMIT is 0 fps... Creating our timer... Current language ID: [409] Current sound pack: US Retrieving UGCX module's version... Running UGCX module's version: Version: 2.0.0.0 Attempting to connect to the Flight Simulator... CONNECTED! to Flight Simulator... Mapping Flight Simulator's events... Setting up data definitions... Registering delayed events... Initializating scenery reader system... The scenery index MUST BE CREATED!, because it doesn't exists... Building the scenery index files... Deleting the old scenery index files... Reading the SCENERY.CFG file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg] Reading the ADD-ONS.CFG file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\add-ons.cfg] Reading the 'ADD-ON.XML' file, located in: [C:\Program Files\Imagine Simulation\Operations Center for P3D, X-Plane, FSX\SimWorks Studios\Live Scenery\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Imagenesim\WSSS Singapore P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Imagenesim\KATL Atlanta P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Sierrasim\SimMarket\SIERRASIM SIMULATION - MGGT LA AURORA INTL AIRPORT P3D P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Sim-wings Anchorage Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Sim-wings London Heathrow Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Sim-wings Madrid Barajas Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Mega Airport Frankfurt Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam ZurichX\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KMEM\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAX_V2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAS\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KJFK\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KFLL\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KDFW\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KCLT\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam CYVR\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft CRJ Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A330 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A320-A321 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A318-A319 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the ADD-ONS.CFG file, located in: [C:\Users\Ferna\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-ons.cfg] Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\FlyTampa\Libraries\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\FlyTampa\Toronto\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\FlyTampa\Copenhagen\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KDEN\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KIAD\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KMSP\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KPHX\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KSFOHD\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - NZAA\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - SEQM\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSDG\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSDG-LITE-La Romana\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KORDV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Fort Lauderdale\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Key West KEYW P3D\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Miami KMIAv5\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR New Orleans KMSY P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Raleigh Durham Int'l P3dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR San Juan TJSJ P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Lorby-SI PayloadManagerX\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Miami City X\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Navigraph Simlink\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\NY Airports v2 X\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-BarranquillaV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-LimaV4\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-RionegroV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SlopedrwyAI\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SXAD KELP_P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SXAD_Lib_P3D5\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\wsm_sksm\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\utLive\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-Bogota\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'SCENERY_ADD-ONS.XML' file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml] Loading DEFAULT scenery files boundaries list... Sorting the scenery areas list in DESCENDING order... Reading ALL the scenery areas... Saving DEFAULT Scenery Files Boundaries to Disk... Saving Scenery Areas to Disk... Saving Scenery Files to Disk... Unloading the scenery index from memory... Updating the INITIALIZATION file... Creating aircraft's profile FONT... Module's initialization sequence COMPLETED! ------------------------------------------------------------------------------- --------------------------- LOCATION CHANGED --------------------------- --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\cs757-200_PW2040w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B757-200-III_PW2040.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! --------------------------- LOCATION CHANGED --------------------------- Aircraft's Model Name: [CS 757-200 UNITED AIRLINES N525UA] ------------------------------------------------------------------------------- GPS System - Nearest airport's ICAO ID: [KMCO]... Checking for updates, contacting FS2Crew server... Updates check COMPLETED!... ----------------------- UGCX API ----------------------- Registering API variables... ----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- Loading CURRENT Language and Sound Pack... Stopping the voice recognition's engine... The voice recognition's engine has been STOPPED... Stopping Text-To-Speech... Text-To-Speech has been STOPPED... UGCX - CURRENT language's ID: [409] UGCX - CURRENT sound pack: US WINDOWS - CURRENT language's ID: 0x0409 UGCX - CURRENT language's Name: [English – United States] Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file... Reading the REGIONAL sound packs INITIALIZATION file... Loading the language's DEFAULT sounds pack... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Starting the speech recognition's engine... Starting the voice recognition's engine... Language ID: 409... Creating the ISpRecognizer object... Creating the ISpRecoContext object... Defining the SR notification callback... Setting SR event types... Creating the ISpAudio object... Setting the input stream for the SR... Activating the SR engine... Creating the ISpRecoGrammar object... Loading the specified CFG grammar file... Activating the rule ID: 1... The voice recognition's engine has been STARTED... Starting the Text-To-Speech engine... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... ----------------------- LOADING SCENERY AND GRAMMAR ----------------------- Creating and executing the WORKER thread... Starting the WORKER thread... Loading and updating the scenery cache's data... Searching for the NEAREST airport... The NEAREST airport's ID: KMCO Located at the Region's ID: The NEAREST airport's BGL file's path is: D:\Lockheed Martin\Prepar3D v4\SimMarket\TAXI2GATE - KMCO P3Dv4\data\KMCO-V2\scenery\KMCO_AFV4.bgl Searching for the CURRENT parking's information... Unloading scenery index... Triggering CUSTOM event... Loading the sound pack based on the CURRENT region and language: [US]... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Loading the speech recognition's grammar... DEACTIVATING the grammar... Retrieving a handle to the PB ROUTE NAMES dynamic rule... Adding ALL airport's items to the loaded CFG grammar... Adding ALL dialogues to the loaded CFG grammar... Commit grammar changes... ACTIVATING the grammar... Loading process has been COMPLETED! ------------------------------------------------------------------------------- ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\cs757-200_PW2040w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B757-200-III_PW2040.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 757-200 UNITED AIRLINES N525UA] ------------------------------------------------------------------------------- Requested Ground Service: PUSHBACK [or] ENGINE STARTUP SEQUENCE... Current airport's ICAO ID: [KMCO] Current airport's BGL file's path: D:\Lockheed Martin\Prepar3D v4\SimMarket\TAXI2GATE - KMCO P3Dv4\data\KMCO-V2\scenery\KMCO_AFV4.bgl Current Gate's (or parking's) ID: [Gate 41] USER's aircraft model name: [CS 757-200 UNITED AIRLINES N525UA] USER's aircraft CURRENT location: +-> Latitude: 28.42712964 degrees +-> Longitude: -81.31505207 degrees +-> Altitude: 32.507 meters +-> True Heading: 123.221 degrees Requested aircraft's information to the Flight Simulator... The TUG has been CREATED in the simulation. --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\cs757-200_PW2040w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B757-200-III_PW2040.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 757-200 UNITED AIRLINES N525UA] -------------------------------------------------------------------------------
November 3, 20241 yr Commercial Member Are you in an Admin account? You have "Advanced Animations" selected? B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
November 3, 20241 yr Commercial Member Please make sure you re-check the manuals: https://support.fs2crew.com/manuals/ and re-check the Troubleshooting FAQs: B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
November 15, 20241 yr Author Hello Sir; Thank you for your reply. Are you in an Admin account?...As far as I know I have a User account only! You have "Advanced Animations" selected?....Not sure about this "advance animations"🤔 I have revise the manuals but don't see anything related to the problems here in my system!! v/r FR
Create an account or sign in to comment