fernandito1969

Hello Sir; Thank you for your reply. Are you in an Admin account?...As far as I know I have a User account only! You have "Advanced Animations" selected?....Not sure about this "advance animations"🤔 I have revise the manuals but don't see anything related to the problems here in my system!! v/r FR

Hello again; Sorry I lost track of this 1st attempt requesting assistance. There it's another Topic Post submitted today. In regard to this 1st post, I had done what was suggested and zero resolution. I did uninstall the software and reinstalled and same scenario took place as described above and on today's submission. I did also exclude the file into the windows defender options just in case that would have been a cause but No difference. Any thought??🤔 Att. Fernando Rentas

Hello; I am trying to get some assistance with this UGSX addon in my system. My situation is that a few months ago my Microsoft System became corrupted and after the repair and reinstallation of all software, when it was turn for the UGSX did not work properly as it was before from that point. Once I had reinstalled all Microsoft and then Sim software (P3D 4.5), I then proceed it with UGSX. Now, the 1st thing notice that the 1st panel of installation does appears but cannot attached to this panel, but it did not show me the one to enter the product number. Then, the next thing that appears the progress bar that runs while Sim its loading. Then addon menu panel with all the options does appears however, when attempting to do the Aircraft Settings and saved it does nothing. First, the Tug vehicle does shows but the 3ea figures of the tarmac do not. Furthermore, when prompted the pushback sequence option same thing happened, nothing happens with the exception of the tug vehicle. No idea what to try next, so could you please assist? I was looking for an attachment option in the panel to attach the UGSX Log Note Pad but there's none available than I see therefore, I have copied and pasted it below as it shows from the UGSX Log option. Hope to hear a solution or advise or what its causing this it. Thank you. 🤔 Att. Fernando Rentas Order #90076 Order Date: 27th Sep 2019 ------------------------ INITIALIZATING FS MODULE ------------------------ It's a supported Flight Simulator: [11]... Hooking to the Flight Simulator's MAIN window procedure... Registering CUSTOM windows messages... Reading the INITIALIZATION file... Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths... Reading settings from the FSX.CFG or PREPAR3D.CFG file located here: C:\Users\Ferna\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg The Flight Simulator's frame rate LIMIT is 0 fps... Creating our timer... Current language ID: [409] Current sound pack: US Retrieving UGCX module's version... Running UGCX module's version: Version: 2.0.0.0 Attempting to connect to the Flight Simulator... CONNECTED! to Flight Simulator... Mapping Flight Simulator's events... Setting up data definitions... Registering delayed events... Initializating scenery reader system... The scenery index MUST BE CREATED!, because it doesn't exists... Building the scenery index files... Deleting the old scenery index files... Reading the SCENERY.CFG file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg] Reading the ADD-ONS.CFG file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\add-ons.cfg] Reading the 'ADD-ON.XML' file, located in: [C:\Program Files\Imagine Simulation\Operations Center for P3D, X-Plane, FSX\SimWorks Studios\Live Scenery\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Imagenesim\WSSS Singapore P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Imagenesim\KATL Atlanta P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Sierrasim\SimMarket\SIERRASIM SIMULATION - MGGT LA AURORA INTL AIRPORT P3D P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Sim-wings Anchorage Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Sim-wings London Heathrow Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Sim-wings Madrid Barajas Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Mega Airport Frankfurt Professional\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam ZurichX\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KMEM\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAX_V2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAS\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KJFK\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KFLL\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KDFW\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KCLT\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam CYVR\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft CRJ Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A330 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A320-A321 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A318-A319 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the ADD-ONS.CFG file, located in: [C:\Users\Ferna\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-ons.cfg] Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\FlyTampa\Libraries\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\FlyTampa\Toronto\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\FlyTampa\Copenhagen\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KDEN\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KIAD\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KMSP\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KPHX\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KSFOHD\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - NZAA\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - SEQM\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSDG\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSDG-LITE-La Romana\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KORDV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Fort Lauderdale\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Key West KEYW P3D\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Miami KMIAv5\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR New Orleans KMSY P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Raleigh Durham Int'l P3dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR San Juan TJSJ P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Lorby-SI PayloadManagerX\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Miami City X\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Navigraph Simlink\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\NY Airports v2 X\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-BarranquillaV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-LimaV4\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-RionegroV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SlopedrwyAI\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SXAD KELP_P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SXAD_Lib_P3D5\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\wsm_sksm\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\utLive\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-Bogota\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'SCENERY_ADD-ONS.XML' file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml] Loading DEFAULT scenery files boundaries list... Sorting the scenery areas list in DESCENDING order... Reading ALL the scenery areas... Saving DEFAULT Scenery Files Boundaries to Disk... Saving Scenery Areas to Disk... Saving Scenery Files to Disk... Unloading the scenery index from memory... Updating the INITIALIZATION file... Creating aircraft's profile FONT... Module's initialization sequence COMPLETED! ------------------------------------------------------------------------------- --------------------------- LOCATION CHANGED --------------------------- --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\cs757-200_PW2040w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B757-200-III_PW2040.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! --------------------------- LOCATION CHANGED --------------------------- Aircraft's Model Name: [CS 757-200 UNITED AIRLINES N525UA] ------------------------------------------------------------------------------- GPS System - Nearest airport's ICAO ID: [KMCO]... Checking for updates, contacting FS2Crew server... Updates check COMPLETED!... ----------------------- UGCX API ----------------------- Registering API variables... ----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- Loading CURRENT Language and Sound Pack... Stopping the voice recognition's engine... The voice recognition's engine has been STOPPED... Stopping Text-To-Speech... Text-To-Speech has been STOPPED... UGCX - CURRENT language's ID: [409] UGCX - CURRENT sound pack: US WINDOWS - CURRENT language's ID: 0x0409 UGCX - CURRENT language's Name: [English – United States] Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file... Reading the REGIONAL sound packs INITIALIZATION file... Loading the language's DEFAULT sounds pack... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Starting the speech recognition's engine... Starting the voice recognition's engine... Language ID: 409... Creating the ISpRecognizer object... Creating the ISpRecoContext object... Defining the SR notification callback... Setting SR event types... Creating the ISpAudio object... Setting the input stream for the SR... Activating the SR engine... Creating the ISpRecoGrammar object... Loading the specified CFG grammar file... Activating the rule ID: 1... The voice recognition's engine has been STARTED... Starting the Text-To-Speech engine... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... ----------------------- LOADING SCENERY AND GRAMMAR ----------------------- Creating and executing the WORKER thread... Starting the WORKER thread... Loading and updating the scenery cache's data... Searching for the NEAREST airport... The NEAREST airport's ID: KMCO Located at the Region's ID: The NEAREST airport's BGL file's path is: D:\Lockheed Martin\Prepar3D v4\SimMarket\TAXI2GATE - KMCO P3Dv4\data\KMCO-V2\scenery\KMCO_AFV4.bgl Searching for the CURRENT parking's information... Unloading scenery index... Triggering CUSTOM event... Loading the sound pack based on the CURRENT region and language: [US]... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Loading the speech recognition's grammar... DEACTIVATING the grammar... Retrieving a handle to the PB ROUTE NAMES dynamic rule... Adding ALL airport's items to the loaded CFG grammar... Adding ALL dialogues to the loaded CFG grammar... Commit grammar changes... ACTIVATING the grammar... Loading process has been COMPLETED! ------------------------------------------------------------------------------- ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\cs757-200_PW2040w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B757-200-III_PW2040.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 757-200 UNITED AIRLINES N525UA] ------------------------------------------------------------------------------- Requested Ground Service: PUSHBACK [or] ENGINE STARTUP SEQUENCE... Current airport's ICAO ID: [KMCO] Current airport's BGL file's path: D:\Lockheed Martin\Prepar3D v4\SimMarket\TAXI2GATE - KMCO P3Dv4\data\KMCO-V2\scenery\KMCO_AFV4.bgl Current Gate's (or parking's) ID: [Gate 41] USER's aircraft model name: [CS 757-200 UNITED AIRLINES N525UA] USER's aircraft CURRENT location: +-> Latitude: 28.42712964 degrees +-> Longitude: -81.31505207 degrees +-> Altitude: 32.507 meters +-> True Heading: 123.221 degrees Requested aircraft's information to the Flight Simulator... The TUG has been CREATED in the simulation. --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\cs757-200_PW2040w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B757-200-III_PW2040.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_PW2040\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 757-200 UNITED AIRLINES N525UA] -------------------------------------------------------------------------------

Greetings; I had purchased UGCX over 3 years ago and recently had to a problem with my windows program that force me to reinstall a new fresh one. For the past 3 years UGCX has being working flawless but ever since reinstalling the addon became partially functional. Activation key was entered and when prompted the UGSCx panel does come up when prompted but attempting to do the Aircraft Settings, howver, the people figures on the ground (marshaller) neither of them three appears and nothing can be set correct. Any suggestions or advise that could help resolve this issue? v/r Fernando Rentas (Log Below)🤔 ------------------------ INITIALIZATING FS MODULE ------------------------ It's a supported Flight Simulator: [11]... Hooking to the Flight Simulator's MAIN window procedure... Registering CUSTOM windows messages... Reading the INITIALIZATION file... Getting the FSX.CFG (or PREPAR3D.CFG) and CAMERAS.CFG files paths... Reading settings from the FSX.CFG or PREPAR3D.CFG file located here: C:\Users\Ferna\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.cfg The Flight Simulator's frame rate LIMIT is 0 fps... Creating our timer... Current language ID: [409] Current sound pack: US Retrieving UGCX module's version... Running UGCX module's version: Version: 2.0.0.0 Attempting to connect to the Flight Simulator... CONNECTED! to Flight Simulator... Mapping Flight Simulator's events... Setting up data definitions... Registering delayed events... Initializating scenery reader system... Verifying the Flight Simulator's SCENERY configuration... Reading the SCENERY.CFG file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\Scenery.cfg] Reading the ADD-ONS.CFG file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\add-ons.cfg] Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam ZurichX\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KMEM\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAX_V2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KLAS\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KJFK\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KFLL\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KDFW\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KCLT\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam CYVR\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft CRJ Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A330 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A320-A321 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [D:\Lockheed Martin\Prepar3D v4\Aerosoft\Aerosoft A318-A319 Professional\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Program Files (x86)\12bPilot\SODE\P3Dv4\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam Exclude\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the ADD-ONS.CFG file, located in: [C:\Users\Ferna\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-ons.cfg] Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KDEN\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KIAD\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KMSP\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KPHX\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - KSFOHD\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - NZAA\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Flightbeam - SEQM\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSDG\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSDG-LITE-La Romana\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FsDreamTeam KORDV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\FSUIPC6\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Fort Lauderdale\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Key West KEYW P3D\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Miami KMIAv5\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR New Orleans KMSY P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR Raleigh Durham Int'l P3dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\LatinVFR San Juan TJSJ P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Lorby-SI PayloadManagerX\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Miami City X\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\Navigraph Simlink\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\NY Airports v2 X\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-BarranquillaV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-LimaV4\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-RionegroV2\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SlopedrwyAI\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SXAD KELP_P3Dv4\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\SXAD_Lib_P3D5\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\wsm_mkjp\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\wsm_sksm\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\utLive\add-on.xml] This is a VALID! add-on.xml file... Reading the 'ADD-ON.XML' file, located in: [C:\Users\Ferna\Documents\Prepar3D v4 Add-ons\PKSIM-Bogota\add-on.xml] This is a VALID! add-on.xml file... SCENERY component detected!... Reading the 'SCENERY_ADD-ONS.XML' file, located in: [C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery_add-ons.xml] Unloading the scenery index from memory... Updating the INITIALIZATION file... Creating aircraft's profile FONT... Module's initialization sequence COMPLETED! ------------------------------------------------------------------------------- --------------------------- FLIGHT PLAN FILE INFORMATION --------------------------- Flight plan's file path: [C:\Users\Ferna\Documents\Prepar3D v4 Files\IFR Kennedy Intl to Charlotte Douglas Intl.pln] Event's type: FLIGHT PLAN - ACTIVATED --------------------------- LOCATION CHANGED --------------------------- --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\cs767-300ER_PW4060w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B767-300ER-II_PW4060.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! --------------------------- LOCATION CHANGED --------------------------- Aircraft's Model Name: [CS 767-300ER DELTA VINTAGE N171DN] ------------------------------------------------------------------------------- GPS System - Nearest airport's ICAO ID: [KJFK]... Checking for updates, contacting FS2Crew server... Updates check COMPLETED!... ----------------------- UGCX API ----------------------- Registering API variables... ----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- Loading CURRENT Language and Sound Pack... Stopping the voice recognition's engine... The voice recognition's engine has been STOPPED... Stopping Text-To-Speech... Text-To-Speech has been STOPPED... UGCX - CURRENT language's ID: [409] UGCX - CURRENT sound pack: US WINDOWS - CURRENT language's ID: 0x0409 UGCX - CURRENT language's Name: [English – United States] Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file... Reading the REGIONAL sound packs INITIALIZATION file... Loading the language's DEFAULT sounds pack... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Starting the speech recognition's engine... Starting the voice recognition's engine... Language ID: 409... Creating the ISpRecognizer object... Creating the ISpRecoContext object... Defining the SR notification callback... Setting SR event types... Creating the ISpAudio object... Setting the input stream for the SR... Activating the SR engine... Creating the ISpRecoGrammar object... Loading the specified CFG grammar file... Activating the rule ID: 1... The voice recognition's engine has been STARTED... Starting the Text-To-Speech engine... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... ----------------------- LOADING SCENERY AND GRAMMAR ----------------------- Creating and executing the WORKER thread... Starting the WORKER thread... Loading and updating the scenery cache's data... Searching for the NEAREST airport... The NEAREST airport's ID: KJFK Located at the Region's ID: The NEAREST airport's BGL file's path is: C:\Program Files (x86)\Addon Manager\FsDreamTeam\KJFK\scenery\KJFK_FSDT.BGL Searching for the CURRENT parking's information... Unloading scenery index... Triggering CUSTOM event... Loading the sound pack based on the CURRENT region and language: [US]... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Loading the speech recognition's grammar... DEACTIVATING the grammar... Retrieving a handle to the PB ROUTE NAMES dynamic rule... Adding ALL airport's items to the loaded CFG grammar... Adding ALL dialogues to the loaded CFG grammar... Commit grammar changes... ACTIVATING the grammar... Loading process has been COMPLETED! ------------------------------------------------------------------------------- ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\cs767-300ER_PW4060w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B767-300ER-II_PW4060.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 767-300ER DELTA VINTAGE N171DN] ------------------------------------------------------------------------------- ------------------------ SIMULATION STOPPED ------------------------ Stopping Text-To-Speech... Text-To-Speech has been STOPPED... ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\cs767-300ER_PW4060w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B767-300ER-II_PW4060.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 767-300ER DELTA VINTAGE N171DN] ------------------------------------------------------------------------------- ------------------------ SIMULATION STOPPED ------------------------ Stopping Text-To-Speech... Text-To-Speech has been STOPPED... ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\cs767-300ER_PW4060w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B767-300ER-II_PW4060.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 767-300ER DELTA VINTAGE N171DN] ------------------------------------------------------------------------------- ------------------------ SIMULATION STOPPED ------------------------ Stopping Text-To-Speech... Text-To-Speech has been STOPPED... --------------------------- LOCATION CHANGED --------------------------- ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\cs767-300ER_PW4060w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B767-300ER-II_PW4060.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 767-300ER DELTA VINTAGE N171DN] ------------------------------------------------------------------------------- ------------------------ SIMULATION STOPPED ------------------------ Stopping Text-To-Speech... Text-To-Speech has been STOPPED... ------------------------ SIMULATION STARTED ------------------------ Adding our module's entry to the ADDONS menu entry... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... --------------------------- LOADED AIRCRAFT INFORMATION --------------------------- CURRENT aircraft's AIR file path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\cs767-300ER_PW4060w.air] Reading the AIRCRAFT's PROFILE path: [C:\Users\Ferna\AppData\Roaming\Ultimate Ground Crew X\Aircraft Profiles\CS_B767-300ER-II_PW4060.cfg] The AIRCRAFT's PROFILE has been read COMPLETELY! Reading the AIRCRAFT.CFG file's path: [D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\CS_B767-300ER-II_PW4060\aircraft.cfg] The AIRCRAFT.CFG file has been read COMPLETELY! Aircraft's Model Name: [CS 767-300ER DELTA VINTAGE N171DN] ------------------------------------------------------------------------------- GPS System - Nearest airport's ICAO ID: [KCLT]... The NEAREST AIRPORT is now more than 3.0 nm AWAY! ----------------------- UGCX API ----------------------- Registering API variables... ----------------------- LOADING LANGUAGE AND SOUND PACK ----------------------- Loading CURRENT Language and Sound Pack... Stopping the voice recognition's engine... The voice recognition's engine has been STOPPED... Stopping Text-To-Speech... Text-To-Speech has been STOPPED... UGCX - CURRENT language's ID: [409] UGCX - CURRENT sound pack: US WINDOWS - CURRENT language's ID: 0x0409 UGCX - CURRENT language's Name: [English – United States] Reading all WORDS, SHORT, LONG PHRASES, VISUAL TEXTS, AIRPORT'S AREAS and ALTITUDES from the LANGUAGE initialization file... Reading the REGIONAL sound packs INITIALIZATION file... Loading the language's DEFAULT sounds pack... Loading CURRENT sounds set... Attempting to load the following sound pack files: D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xgs D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xwb D:\Lockheed Martin\Prepar3D v4\Ultimate Ground Crew X\SoundSets\US.xsb Sounds set LOADED SUCCESSFULLY!... Creating and initializating the stream... Setting the master volume... Starting the speech recognition's engine... Starting the voice recognition's engine... Language ID: 409... Creating the ISpRecognizer object... Creating the ISpRecoContext object... Defining the SR notification callback... Setting SR event types... Creating the ISpAudio object... Setting the input stream for the SR... Activating the SR engine... Creating the ISpRecoGrammar object... Loading the specified CFG grammar file... Activating the rule ID: 1... The voice recognition's engine has been STARTED... Starting the Text-To-Speech engine... Starting the Text-To-Speech engine... Text-To-Speech has been STARTED... ----------------------- LOADING SCENERY AND GRAMMAR ----------------------- Creating and executing the WORKER thread... Starting the WORKER thread... Loading and updating the scenery cache's data... Excluded Airport's ID: [KCLT] Excluded Airport's ID: [KCLT] Excluded Airport's ID: [KCLT] Couldn't find ANY airport in the vicinity!... USER's aircraft model name: [CS 767-300ER DELTA VINTAGE N171DN] USER's aircraft CURRENT location: +-> Latitude: 35.20379630 degrees +-> Longitude: -80.93492837 degrees +-> Altitude: 232.305 meters +-> True Heading: 250.605 degrees Unloading scenery index... Triggering CUSTOM event... Loading process has been COMPLETED! ------------------------------------------------------------------------------- ------------------------ SIMULATION STOPPED ------------------------ Stopping Text-To-Speech... Text-To-Speech has been STOPPED... Stopping the voice recognition's engine... The voice recognition's engine has been STOPPED...

Searching for remedy for the following problem from the avsim community Lately I have spend many hours searching for info through the forum and some of the technicians on getting the pdmg 777 to work correct and it was accomplished plus working superb however, since yesterday morning I have encountered a new problem that I'm not sure if its a FSX or PDMG to consult with; 1. Once the FXS program started it shut down on its own. The start up logo comes up and music started but immediately stopped. 2. Contacted Microsoft for tech support and they directed me to uninstall the FSX acceleration program and download the sp1 & sp2. 3. No resolution from action #2, so proceeded to uninstalled all of the ones mentioned above. 4. Then FSX program ran as normal and allowed me to select the aircraft/departure/arrival/time and weather..etc. 5. But once the settings are loading the FSX program will stops and shows the following msg "Your computer has run out of available memory. Please restart flight Simulator and select different graphics, scenery, or traffic settings" 6. I followed those instructions and problem prevailed. Note; Its a brand new IBM Lenovo Gaming PC with no additional program other than FSX and add-ons. 7. In some instances it completes the upload and the settings to run the pdmg 777 but does not run properly (Everything on the VC its inop) and it shuts down showing the same message listed on # 5. Please, Any suggestion or procedure to share to fix this problem???

Roger that!. Thanks!

Hi Bryan; I was checking on the forum for a topic deals with FSX crashing while using the PDMG and did not spotted one as of yet. Its there one available already running or have a remedies . Tonight everything was going smooth until activated GSX for pushback and the FSX program stopped working. That's the second time tonight. Also, today I have downloaded two sceneries from simmarket website (KMIA & TJSJ) and was wondering if that could have something to do with it?. It happened in previous days before but after happened once it did not happened again with the exception of today. Also going back to the question about the PDMG 7474, you are saying that its not available yet for purchase?

..Wao!..awesome stuff available in that website, surely will do some purchases from it soon. Thanks for all the help Bryan, really made some progress trying to figure this monster of a program with your help Best.

Hi; Finally completed my 1st flight with the pdmg 777-200LR last night . The issue with the speed brake was resolve but by setting it manually instead by voice to the FO :im Not Worthy:. I will try once again tonight to confirm it. During prep for decent I had to play a bit with the CDU with the route since there were too many waypoints showing on the flight route caused flying above the airport for an extended period of time. I was able to eliminate some of them to direct shot to the glide path. At the time for landing all went well, except that matter mentioned about the speed brake. :Applause: Also the matter about the MDA was also resolved with the exception that I had to bring the aircraft nose manually for final landing touch down on the run way or forced down and not on its own . :Party:Overall it was indeed a great flight and its indeed an awesome program. Will do a flight tonight to a different dest. and see how behaves. 2 Question - :unknw:1. I have notice on youtube videos that there its a pdmg 747-400 but not listed on the pdmg website along with the 777 and 737. Where do I find that one and download it? :unknw:2. In regards to airports scenery enhancement that shows some of the Airport Gates and surroundings shows more realistic items at sight. I have check in the library for scenery of several airports scenery downloads that I regularly fly into and depart but so far no real changes with those downloads. Would you be able to point me in the right direction on where to find those downloads?

Roger that!, Will fly and send feedback...

Hello Bryan; Try the suggestion for the "Armed Speed Brake" call issue with the FO respond last night and had an interruption which caused me to close the program and did not get to the Landing checklist moment. I'm about to go up and try a short flight (KMIA to TJSJ) and see what happens. 1 Question; This was not a voice command that its replied back to the fs3 crew FO,..correct. Also, I have googled up the MDA in this case on (TJSJ Approach Charts) and looked through the entire charts for runway 8 and 10 and still not able to spot that. Would you be able to upload a screen shot example of the chart where its listed. I have look the charts closely line by line, section by section and cannot spot it yet. ________________________________________________________________________________________ Edited; Hold 1 Bryan, My apologies, I've just spotted this here on the TJSJ Approach Charts; *RNAV (GPS) RWY 08 - *LNAV MDA - 560-1/2 551 (600-1/2)........500 or 600? But not so for ILS or LOC RWY 8: It shows: S- LOC-8 - ​560-1/2 551(600-1/2) Unsure which one will be if flight plan indicates landing on Rwy 8 instead of Rwy 10​ ​confused now????????????

Still working on the matter, hopefully today. I have being able to get the program to operate completely and indeed its an awesome program. I have got another difficulty here; - What exactly must be replied with to the fs2 crew at the moment when calling out "Landing Checklist" when the FO replies with "The Speed brake its not Armed"?. I have scrolled through the manual and command section for that particular spot and so far can find a remedy for it or what its required to reply with. I have tried "speed brake set to 3, Speed brake its Armed, and nothing takes place, therefore not able to proceed with the remaining steps causing difficulties to proceed to a smooth landing. Any advise?. Also would you be able to clear for me where to get the MDA to apply it to the FMC for approach and landing, could you point me at the right spot or direction if able?. I'm currently using "Simbrief" for the flight plan load up and cannot see an "MDA" on the FP details.

EZDOK?, have not run into that acronym yet Bryan, what is it? program, download, or update?

Oh almost forgot 1 more. Prior to install fsx on my gaming CP, I was able to download or add something to the files on my other CP that enable me to zoom out the VC at the pmdg 777 but completely forgot what was the download or addon used. Would you happen to have that info available on hand to refresh my memory?. I also searching around to enable me the same with fs2 Crew panel if possible. Trying to minimized it to fit the screen entirely...

Hi Bryan; Yes, Norton identified the download of fs2crew as a treat. I then visited the troubleshooting section on the manual and instructed me to turn "Off" the firewall on my system and try to download again. It worked, it downloaded and installed the program with no problems and worked totally awesome. All voices commands during the PF Events, FO, and FA ran like a millions dollars. Only one trouble encountered, I was not able to land the aircraft on the runway and complete the flight. I set a flight from KMIA to KPHL and at time to land and with glide path captured the program froze and automatically went to shut down mode..Grrrrrr!.was furious...lol. Anyway I will attempt the flight again tonight and see what happens then and post some feedback.

Hi Bryan; Just attempted this remedy posted in regards to the volumes settings and all it's in line with your instructions, however I ran into a different issue. I have just recently purchase a gaming CP and reloaded only FSX with all addons. So far all programs were successfully uploaded are working for the exception of FS2 Crew 777 panel for the PMDG 200ER & 300. I still have to verify the FS2Crew for the 747 and 737 that are working and I don't forecast any problems since the message said "download successful". I uploaded the FS2Crew for 777 program again with the back up disk and no go; I have download it straight from link available at FSPilotshop as well and shows its blocked by the Norton virus program on both attempts. However the RAAS did uploaded successfully and no problems. In view of that, I did ran a complete flight last night to verify that it was working to my expectations and it did 100% "all good". The gaming CP did make the difference with the frames and Indeed works awesome but now comes the frustration with FS2 Crew 777 to function like it should. Does this issue might be in relation with the firewall or its there another way to get it to work?

Yes Sir, got it and it work. Awesome. Thanks Pete Thanks for all your help Mike. I have resolved many of the issue posted previously. Now, I got 2 more problems to work; #1. On the PDMB 777-300ERX once take off and during climbing the screen or the program freezes but the sound remains running. Not sure where to post that question on the panel. #2. A few of the fsc2Crew voice moments during the PF Events from the FO and FA are not heard. I have posted that issue already at the right spot hopefully. Pending feedback now. Any remedies for that 1st issue mentioned?

Hi; What are the remedies for the following voice problems with FS2 Crew 777-300ERX if ; 1. No FO voice at activation of the PF Events. 2. No FO voice hear at walk around time - at the 40min 3. No FO voice at time returning from walk around the plane - at 29 min 4. No FA voice requesting permission for boarding 5. No FA voice when enter the cockpit after request for refreshments 6. No voice from Ramp/Gate Agent turning in the log at 24min However FO does responds to preflight chklist when called for and beyond...

Hello Mike; Could you assist me with instructions on how to get to the Pdmg 777 Operations Center to download 777 livery into my system. I have followed a few paths per instructions and not able to find the proper file yet on the FSX Files or PDMG folder where I can find a direct link that will get me there quicker.

Problem resolved Mike, thanks!

Problem persist for the fs2 Crew panel- Panel size remains over the L & R edges of the screen not able to minimized the panel it to fit entirely on the screen . Any other suggestion?. However, the zoom out of the VC was achievable, that issue was resolved.

Hi Bryan; Could you advise what to do with fs2crew 777 panel for the following problems; 1. All announcements for (FA, GRD, BRF) section sound levels remain to low even when adjusting it at the panel and on the computer. 2. When initiating the fs2crew events the FOs voice its not heard until I prompt "preflight checklist". It is then I can hear the FO reply clearly on my headset but replies with "captain please set parking break". The parking break its already set and has being like so for a while to allow GSX do its thing. I have attempted to reply with "parking break set", "parking break On" or "Set" at the moment when asked and no reply or further actions takes place or don't advance through the remaining checklist. 3. Once activated the panel and appears on screen cannot panel hide (either pressing the same key or fsx close window) nor cannot minimize to fit it to view it entirely on the screen..1st choice 4. Same effect for the (take off & approach) briefings panels as listed on #3. 5. After takeoff and following the route, the program freezes in mid air but sounds still remains running. I hope I placed this issues at the right6 spot, if not my apologies. Trying to understand how to handle the forum. Att.

Understood Budbud! will try this, keep you posted on result...thank you! Got it Scand...overlooked that detail!...thanks!

1. Fs2 Crew Panel Cpt Set Voice & Botton with RAAS Pro was operational after dowloadfing the PDMG 777-200LRX and was assigned ket at thet the joystick's. Once purchased and dowload the expasion program of "PDMG 777-300EX" the panel no longer appears on the screen when activated. Any suggestion to fix this problem?? 2. Additionally, I was having problems with the panel prior to the above listed issue. I was getting a "SDK Error msg"...could you assist?

Wide View Aspect was found and change to "True" was on false...will keep you posted on outcome. Thanks Scandi