FSX-MS Landing light problem with Project Airbus A321 NEO

[epopchock]

I recently did a night flight from New York to Palm Beach in the Project Airbus A321 NEO (under the Delta Airlines livery) by Chris Evans (illustrated in one of the included screenshots) and upon landing I noticed that the landing lights weren't illuminating the runway at all, even though the switch was on. Upon switching to an exterior view of the aircraft, I discovered that the landing light only illuminates a small area immediately in front of the aircraft. I have posted a copy of the electrical section of the aircraft config file for reference  http://C:\Users\user\OneDrive\Desktop\Screenshots\Screenshot 2025-02-06 160040.pnghttp://C:\Users\user\OneDrive\Desktop\Screenshots\Screenshot 2025-02-06 152024.pnghttp://C:\Users\user\OneDrive\Desktop\Screenshots\Screenshot 2025-02-09 124444.png

[charliearon]

Sorry, screenshots are a no-show!

[epopchock]

2 hours ago, charliearon said:

Sorry, screenshots are a no-show!

https://1drv.ms/i/c/654bd515da3faae5/Eb1jxiO1sw5IsaOViIRQGjIBTSvl0G1bNFx1jqBN1mnJ2Q?e=lkhYwR https://1drv.ms/i/c/654bd515da3faae5/ETMl0_f4wORLlcymqngIsMABiXzU0Pmm1xKXHX32K3cJCw?e=vwnrS1 https://1drv.ms/i/c/654bd515da3faae5/EclPswzlyANLlOb9ZQlshYcBqo32jU0sXC3v902h46ZMAA?e=jcXmJ1

Edited February 9 by epopchock

[charliearon]

Still 👎

The landing and taxi lights are part of the model.  You may have to substitute
 the spotlight.bmp in the texture folder of FSX.

 

[epopchock]

2 hours ago, charliearon said:

Still 👎

 

what do you mean by substituting the spotlight bmp? I don't quite understand what that has to do with this specific aircraft I am trying to solve the problem with Update: I also just realized that one of the images I posted above were only partially showing up after copying them, so I am gonna post it again: Screenshot 2025-02-09 124444.png Here's the effects, lights, and electrical sections from the A321 NEO config. 

[effects]
wake=fx_wake
water=fx_spray
dirt=fx_tchdrt
concrete=fx_sparks
touchdown=fx_tchdwn, 1

[lights]
light.0=3, -77.90, -0.15,  4.80, fx_navwhih
light.1=2, -77.90,  0.15,  4.80, fx_strobeh
light.2=1,   6.80,  0.00, -5.80, fx_beaconh
light.3=1,   3.83,  0.00,  8.47, fx_beaconh
light.4=4,  47.0,   0.00,  4.1, fx_vclighth ,

[electrical]
;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4)
max_battery_voltage = 24
generator_alternator_voltage = 28
max_generator_alternator_amps = 200
electric_always_available = 1
flap_motor         = 0, 5 , 17.0
gear_motor         = 0, 5 , 17.0
autopilot          = 0, 5 , 17.0
avionics_bus       = 0, 0 , 17.0
avionics           = 1, 0 , 17.0
pitot_heat         = 0, 2 , 17.0
additional_system  = 0, 0 , 17.0
marker_beacon      = 1, 2 , 17.0
gear_warning       = 0, 2 , 17.0
fuel_pump          = 0, 5 , 17.0
starter1           = 0, 20 , 17.0
starter2           = 0, 20 , 17.0
light_nav          = 0, 0 , 17.0
light_beacon       = 0, 5 , 17.0
light_landing      = 0, 5 , 17.0
light_taxi         = 0, 5 , 17.0
light_strobe       = 0, 5 , 17.0
light_panel        = 0, 0 , 17.0
light_cabin        = 0, 0 , 17.0
auto_brakes        = 0, 0 , 17.0
standby_vacuum     = 0, 0 , 17.0
hydraulic_pump     = 0, 0 , 17.0
fuel_transfer_pump = 0, 0 , 17.0
light_recognition  = 0, 0 , 17.0
light_wing         = 0, 0 , 17.0
light_logo         = 0, 0 , 17.0
directional_gyro   = 0, 0 , 17.0
directional_gyro_slaving = 0, 0 , 17.0
 

 

Edited February 10 by epopchock

[charliearon]

Your [lights] section makes no reference to the Landing Lights or Taxi Lights on the aircraft.
they are hard-coded and part of the aircraft model.

The [electrical] section only refers to where the electricity comes from to power different
electrical devices.

The Spotlight.bmp (in FSX Main Texture Folder) is the image of light that is used to define how the Landing and Taxi lights look on the ground.

https://flyawaysimulation.com/downloads/files/17874/fsx-spotlight/

[epopchock]

On 2/10/2025 at 8:08 AM, charliearon said:

Your [lights] section makes no reference to the Landing Lights or Taxi Lights on the aircraft.
they are hard-coded and part of the aircraft model.

The [electrical] section only refers to where the electricity comes from to power different
electrical devices.

The Spotlight.bmp (in FSX Main Texture Folder) is the image of light that is used to define how the Landing and Taxi lights look on the ground.

https://flyawaysimulation.com/downloads/files/17874/fsx-spotlight/

I tried your suggestion, and this fix unfortunately didn't work and now the landing light just barely casts a thin, ropelike glow immediately in front of the aircraft but still doesn't illuminate the runway at all. Any other suggestions? Or should I contact the developer?

Edited February 13 by epopchock

[stans]

There is a little box in the FSX settings, "Landing light illuminates ground", make sure that is checked.

[charliearon]

[epopchock]

On 2/14/2025 at 8:19 AM, charliearon said:

I checked and that setting is on

[charliearon]

On 2/12/2025 at 4:35 PM, epopchock said:

 Or should I contact the developer?

Contact him!

[epopchock]

On 2/17/2025 at 6:19 PM, charliearon said:

Contact him!

I did, but am still waiting to hear back. any other suggestions on what I could try in the meantime?

Edited February 20 by epopchock